SECO-LARM USA SR-2224-C5 User Manual

ENFORCER

Relay Module

SR-2224-C5

Features:

••

•

Two separate sets of Form-C dry contacts.

••

••

•

Perfect for a variety of general switching purposes.

••

••

•

Can be connected for load switching, dry contact, latching

••

output, reverse polarity, line seizure, and other uses.

••

•

6/12/24 VDC operation, programmable by on-board

••

jumpers.

••

•

Red LED indicates relay is energized.

••

••

•

Large terminal blocks for easy installation.

••

••

•

Small size, easily fits inside alarm panel enclosures

••

or other hidden areas.

••

•

Foam mounting tape included.

••

®

Connection Diagram

Two separate sets of Form-C contacts

Input terminals to energize relay

Specifications:

Model Number:

Relay type:

Relay contact ratings:

Supply Voltage:

Current draw:

Minimum pull voltage

Size

Weight

Mounting method:

SR-2224-C5

DPDT, Form-C dry contacts

5A @ 250VAC/30VDC

Programmable 6/12/24VDC,

default at 12VDC

70mA @ 12-24VDC

100mA @ 6VDC

+/- 20 % of operating voltage

2.76" x 1.89" x .79"
(70 x 48 x 20mm)

1.94 oz. (55 g)

Foam tape (included)

®

ENFORCER

Power Supplies

Four Models to Choose From

● Switch selectable (see chart below) DC voltage output.

● Regulated and filtered output voltage.

● Switches to backup battery automatically in case of power loss.

● Short circuit protection.

● Built-in backup battery charger.

Model #

ST-1206-1.5A

ST-2406-2A

ST-2406-3A

ST-2406-5A

Voltage (DC)

6,12

6,12,24

6,12,24

6,12,24

Current Current (peak)

1.5A

1.5A

2.5A

4.0A

2.0A

2.0A

3.0A

5.0A

6V 12V 24V
JP1 ON ON OFF
JP2 ON OFF OFF

Preset 12V

2 Jumpers to
program

Red LED - lights to show
relay is energized

input voltage
(6,12,24V)

®

ENFORCER

Timer Modules

SA-025

●

Triggered by positive voltage (+DC), closure of dry contact, or
opening of dry contact.

●

Set from 1 sec. to 60 min.

●

Relay programmable to activate at start or end of timing cycle.

●

Relay programmable for pulse (flash) activation.

●

Built-in reset function.

●

Form-C relay, contacts rated 8A @ 120VAC/24VDC.

●

LED indicator.

●

12/24VDC (auto sensing).

●

Low current drain.

●

2 7/8" x 2 1/2" (73 x 63 mm).

Power input

Current drain

Relay type

Contact ratings

12/24VDC (auto sensing).

Low

Form-C relay

8A @ 120VAC/24VDC.

SECO-LARM® U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Tel: [phone] (Domestic U.S. & Canada) Tel: [phone] (California & international)
Fax: [phone] Email: [e-mail] Website: www.seco-larm.com

RelayModuleb.p65