SECO-LARM USA SD-C141S User Manual 2

Surface-Type Door Closer

SD-C141S With Adjustable Sweep and Latch Speed

Two independent
valve adjustments:

1. Latch speed

2. Sweep speed

Reversible non-handed design.
For metal or wood doors up to 42" (107cm) wide.
Two independent valve adjustments for easy
setting of sweep and latch speed.
Back plate slides into place to cover adjustment
screws.
Narrow projection of only 1 /8" (35mm).
Anodized aluminum body.
Silver finish.
Forged steel arms.
Includes complete mounting hardware.

3

Access

Rim-Type Exit Device

SD-962AR-36A For Exit Doors from 30" (76cm) to 48" (122cm) Wide

SD-962HL-4A Entry-Type Lever Trim, Non-Handed

SD-962AR-36A

For exit doors -- Allows exit from inside while locked
from outside.
Reversible non-handed design.
For metal or wood doors up to 1 /4" (45mm) thick.

3

1

SD 962AR 36A

Stainless-steel, /4" (19mm) throw latch bolt.
Deadlocking latch -- Prevents the use of credit
cards or similar means to open the latch bolt.
Allen-type /4-turn dogging lock -- Allows the exit
bar to be unlocked for extended periods of time.
Includes all hardware for typical installations.
Works with standard external door handle/lock
devices such as SD-962HL-4A (see below).
Heavy-duty steel construction.
Stainless-steel spring.

NEW

3

SD-962HL-4A

Entry-type lock (locks from outside, opens freely
from inside).
SC4, 6-pin lock.

SD 962HL 4A

Website: www.seco-larm.com e-mail: [e-mail]

Two keys included.

25

Request-to-Exit Plates

Access

2 /16 (71mm)"

2" (51mm)

13

1

2 /8 (54mm)"

S.P.D.T.

Illum.

SD-7202GC-PEQ

2” Square green, illuminated,

momentary pushbutton.
NO/NC contact rated
10A@125~250 VAC.
Includes: “PUSH TO EXIT” &
“PRESIONE PARA SALIR”
button faces.

/16" (17 5mm)

11

7

1 /8 (48mm)"

1 /8 (36mm)"

Illum.

D.P.S.T.

SD-7103GC-PEQ

Green, illuminated, momentary

pushbutton.
NO/NC contact rated
5A@125~250 VAC.
Includes: “PUSH TO EXIT” &
“PRESIONE PARA SALIR”
button faces.

3

7

1 /16 (37mm)"

Timer

Illum.

7

2 /8 (74mm)"

2 (51mm)”

5

2 /16 (59mm)"

SD-7202GC-PTQ

2” Square green, illuminated,

momentary pushbutton.
NO/NC contact rated
3A@120VAC/24VDC.
Includes: “PUSH TO EXIT” &
“PRESIONE PARA SALIR”
button faces.
Built-in timer (1~180 s).
Buzzer output for audio status.

S.P.D.T.

13

2 /16 (71mm)"

/16 (17 5mm)"

11

5

2 /16 (59mm)"

S.P.S.T.

SD-7101KBPE1Q

Black momentary pushbutton

switch with ring guard.
N.C. contact rated 1A@125VAC.
“EXIT” and “SALIDA” silk-screened
on plate.

7

1 /16 (37mm)"

S.P.S.T.

Illum.

Timer

S.P.D.T.

SD-7103GC-PTQ

Green, illuminated, momentary

pushbutton.
NO/NC contact rated
3A@

120VAC/24VDC.
Includes: “PUSH TO EXIT” &
“PRESIONE PARA SALIR”
button faces.
Built-in timer (1~180 s).
Buzzer output for audio status.

NEW

S.P.S.T.

SD-7201KBQ

Black momentary pushbutton

switch with ring guard.
N.C. contact rated 1A@125VAC.

SD-7101RAEX1Q

Red momentary pushbutton switch
with ring guard.
N.O. contact rated 1A@125VAC.

1 (26mm)"

“EXIT” and “SALIDA” silk-screened
on plate.

1 (26mm)"

26

NEWNEW

7

2 /8 (74mm)"

D.P.S.T.

SD-7217GWQ

½

1

Green, ” dia., mushroom-cap

pushbutton.
NO/NC contact rated
5A@125VAC.
White plastic plate to match décor

1

1 /2 (38mm)"

7

1 /8 (48mm)"

of certain rooms/walls.

2 /16 (71mm)"

2" (51mm)

13

1

2 /8 (54mm)"

SD-7223GW-LQ

2” Square green, illuminated,

momentary pushbutton.
NO/NC contact rated
10A@125~250 VAC.
Includes: “PUSH TO EXIT” &
“PRESIONE PARA SALIR”
button faces.
White plastic plate to match décor
of certain rooms/walls.

‧All SECO LARM R T E Plates are available in white as well as without printing (blank). Customized printing is available. Contact SECO LARM for details.‧

1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: [phone]

Illum.

S.P.D.T.

Request-to-Exit Plates

S.P.D.T.

5

3 /16 (84mm)"

SD-7201GA-PT1

Green, 1½” dia., mushroom-cap

pushbutton.
NO/NC contact rated

120VAC/24VDC.

3A@
“EXIT” and “SALIDA” silk-screened

1½ (38mm)"

5

2 /16 (59mm)"

9

3 /16 (91mm)"

1½ (38mm)"

2 (64mm)½"

on plate.
Built-in timer (1~180 sec).
Buzzer output for audio status.

D.P.D.T.

SD-7201GF-PE1

½

1

Green, ” dia., mushroom-cap

pushbutton.
D.P.D.T. switch. Two N.O. and two
N.C. contacts rated 5A@125VAC.
“EXIT” and “SALIDA” silk-screened
on plate.

7

2 /8 (74mm)"

1½ (38mm)"

7

1 /8 (47mm)"

7

2 /8 (74mm)"

1½ (38mm)"

7

1 /8 (47mm)"

D.P.S.T.

SD-7201GC-PE1

½

Green, ” dia., mushroom-cap

1
pushbutton.
NO/NC contact rated
5A@125VAC.
“EXIT” and “SALIDA” silk-screened
on plate.

D.P.S.T.

SD-7201RC-PE1

1½

Red, ” dia., mushroom-cap

pushbutton.
NO/NC contact rated
5A@125VAC.
“EXIT” and “SALIDA” silk-screened
on plate.

Access

NEW NEW

D.P.S.T.

7

2 /8 (74mm)"

Illum.

SD-7251GCEX1Q

D.P.S.T.

½

” dia., illuminated,

Timer

Green, 1

mushroom-cap pushbutton.
NO/NC contact rated
5A@125VAC.
“EXIT” and “SALIDA” silk-screened

1

1 /2 (38mm)"

7

1 /8 (47mm)"

on plate.

NEW

SD-7113-GSP

Green, ” dia.,

mushroom-cap pushbutton.
NO/NC contact rated
5A@125VAC.
"EXIT" and "SALIDA"
silk-screened on plate.
1½Equipped with a pneumatic
timer (2~60 sec).

D.P.S.T.

Timer

SD-7213-GSP

Similar to SD-7113-GSP,

but single-gang.

RF Wireless
Pushbuttons

For a full line of RF wireless

Request-To-Exit pushbuttons,
see page 30.

NEW

D.P.S.T.

Timer

SD-7173-SSP

1

Stainless-steel, ” dia.

pushbutton.
NO/NC contact rated
5A@125VAC.
"EXIT" and "SALIDA"
silk-screened on plate.

Equipped with a pneumatic

timer (2~60 seconds).

D.P.S.T.

/4

Timer

SD-7273-SSP

Similar to SD-7173-SSP

but single-gang.

Website: www.seco-larm.com e-mail: [e-mail]

27

Wireless RF Request-to-Exit Plates

SD-8201GTPE1Q Single-Gang, 1½" (38mm) Diameter, Mushroom-Cap Pushbutton

SD-8202GT-PEQ , 2" (51mm) Square Illuminated Pushbutton

SD-8103GT-PEQ Slimline, Small Illuminated Pushbutton

Access

SD 8103GT PEQ

SD 8201GTPE1Q

3

/4"

( 18mm)

Single-Gang

3 /8 (80mm)"

1½

"

(38mm)

11

2 /16 (68mm)"

1

2 /8 (54mm)"

NEW

NEW

NEW

1

1

4½

1

2 /8 (54mm)"

(115mm)

"

SD 8202GT PEQ

2

(51mm)

2 /4 (57mm)"

4½

"

"

1

2 /8 (54mm)"

( 115mm)

Ideal for hard-to-wire installations such as in cement
walls or brick buildings.
Built-in RF transmitter:

Powered by 9VDC (battery included).

4½

(115mm)

"

–

Operates at 315MHz and up to 50ft (15m).

–

Over 68 billion (6.8x10 ) possible codes.

–

Compatible with all SECO-LARM receivers.

–

LED to indicate RF transmission and low battery:

–

10

Blue: Normal Operation, Red: Low Battery

28

"No Touch" Request-to-Exit Plates

SD-9163-KSVQ Outdoor "No Touch" Slimline Plate with Mechanical Override Button

SD-9263-KSVQ Outdoor "No Touch" Single-gang Plate with Mechanical Override Button

SD-9163-KSQ Outdoor "No Touch" Slimline Plate

SD-9263-KSQ Outdoor "No Touch" Single-gang Plate

SD-9163-KSVQ

Outdoor slimline "No-Touch" sensor.
Adjustable sensing range and delay time.
Mechanical override button.
SD-9263-KSVQ – Similar to SD-9163-KSVQ,
but single-gang.
SD-9163-KSQ – Similar to SD-9163-KSVQ,
but without mechanical override button.
SD-9263-KSQ – Similar to SD-9263-KSVQ,

SD 9163 KSVQ

SD 9263 KSVQ

SD 9163 KSQ

1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: [phone]

SD 9263 KSQ

but without mechanical override button.

NEW

NEW

NEW

NEW

"No Touch" Request-to-Exit Plates

SD-927PKC-NEQ IR RTE Stainless-Steel Plate (English)

SD-927PKC-NFQ IR RTE Plate (French)

"No Touch"

"No Touch" Stainless-Steel

SD-927PKC-NSQ IR "No Touch" RTE Stainless-Steel Plate (Spanish)

SD-927PWCQ IR RTE Plastic Plate (English, French & Spanish)

SD 927PKC NSQ SD 927PKC NFQ

"No Touch"

SECO-LARM's "No Touch" Request-To-Exit Sensors use IR
technology to open a door or activate a device with the
simple wave of a hand. The trigger distance is up to 4"
(10cm). Since they are no touch, these sensors are ideal
for use in hospitals, clinics, labs, cleanrooms (to reduce the
risk of contamination), schools, factories, or offices
(anywhere an easy way to exit is required).

"No Touch" -- Just wave a hand in front of the sensor.
Sensing range up to 4" (100mm). Range is 2" (50mm)
for SD-927PWCQ.
Selectable LED color, turns from red to green or
green to red.
Reduces the risk of cross contamination.
Easy and clean operation.
Reliable IR technology senses motion.
Durable, stainless-steel, single-gang plate.
Quick-connect screwless terminal block.
SPDT 3 Amp relay output.

NEW

NEW

NEW

NEW

Access

SD 927PWCQ

SD 927PKC NEQ

incorporates a white

plastic faceplate to
match the décor of

Six decals included:

SANS CONTACT

SD-927PWCQ

many walls.

NO TOUCH

EXIT

SALIDA

SIN TOCAR

SORTIE

Optional Point-of-Sales Displays -- Display ad available

in English or Spanish, which includes a working
demonstration sensor.

(AD DBO SD927E)

Specifications

Operating voltage
Relay type
Response time
Output time
Sensing range
Operating temperature
Weight
Dimensions

SD-927PKC-NxQ

(AD DBO SD927S)

SD-927PWCQ

12VDC

Form C dry contact, 3A@12VDC

10ms

0.5s or as long as unit is triggered

4” (100mm) 2” (50mm)

4°~131° F ( 20°~55° C)

3 oz (85g)

3

1

4 /2”x2 /4”x1 /16” (115x70x27 mm)

1

Website: www.seco-larm.com e-mail: [e-mail]

29