SECO-LARM USA SA-025 User Manual

ENFORCER

SA-025 Timer Module

The SA-025 Programmable Timer Module is suitable for a wide range
of timed security and access control operations, such as door unlock
timing, siren or bell timer, and so on. Auto-sensing of input voltage
and DIP switches for programming make installation easy.

®

●

Timer can be set from 1 sec. to 60 minutes

●

Can be triggered by positive voltage (+DC),
or closure or opening of dry contact.

●

Relay can be programmed to activate at the
start or at the end of the timing cycle

●

Relay can also be set to activate for one
second at the end of the timing cycle

●

Programmable for pulse (flash) activation

●

Built-in reset function to manually reset
timing cycle

●

Form-C relay, contacts rated 8A @
120VAC/24VDC

●

LED indicates relay is energized

●

12VDC/24VDC operation (auto sensing)

●

Current draw - 3mA (standby) or 40mA
(relay energized)

●

Board measures 2 7/8" x 2 1/2" (73 x 63 mm)

●

Functions programmed via DIP switches ­no jumpers to cut

DIP switch settings

SwitchFunction ON OFF

#1 Timing starts: At end of trigger At start of trigger

#2 How does the timing start? When the module is powered up Connecting (+) to TRG

#3 Timer setting: In seconds In minutes

#4 Steady relay output, or pulse/flash? Steady relay output Pulse/flash output

#5 When does the relay output start? At end of timing period At start of timing period

#6 Relay output mode, delayed or instant? Instant output Delayed output

Other Products Available from SECO-LARM

Power Supply/Chargers

ST-2406-2AST-1206-1.5A

ST-2406-3A

ST-2406-5A

Model #

ST-1206-1.5A

ST-2406-2A

ST-2406-3A

ST-2406-5A

Voltage

6,12

6,12,24

6,12,24

6,12,24

DC

Current

(continuous)

1.5A

1.5A

2.5A

4.0A

Current

(peak)

2.0A

2.0A

3.0A

5.0A

Relay Board

SR-2224-C5

●

5-Amp relay, DPDT, Form-C.

●

6/12/24 VDC operation.

●

LED indicates power.

The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is not responsible for misprints.

For more information, contact: Tel: [phone] (domestic U.S. & Canada)

●

Relay can be wired for load
switching, dry contact, latching,
reverse polarity, line seizure, etc.

Tel: [phone] (California & international) Fax: [phone] Email: [e-mail] Website: www.seco-larm.com

Plus many, many other
products for commercial,
residential and vehicle
security. See our website for
details, or contact us for a
catalog .

TimerPdf070103.pmd