SECO-LARM USA EVT-PBP-V1TQ, EVT-PB1Q, EVT-PB1-V1TSQ User Manual
Passive Video Baluns
EVT-PB1Q
EVT-PBP-V1TQ
EVT-PB1-V1TSQ
Quick-connect screwless terminal Block
6-Inch BNC pigtail connector
Surge protection
The fast, easy, and low-cost way to connect a CCTV camera
to a monitor, multiplexer, or video recorder.
All SECO-LARM passive video baluns transmit the video
signal of a single CCTV camera long distances over low-cost
CAT 5 unshielded twisted pair (UTP) cable.
The EVT-PB1-V1TSQ features a built-in transient surge
protection circuit to help protect sensitive video security
equipment from power spikes.
The EVT-PBP-V1TQ features a 6-inch BNC pigtail connector
for easy connections in tight spaces.
Transmits a monochrome video signal up to 2,000 feet
(610m) or color up to 1,300 feet (400m).
Passive operation - No external power required.
Uses low-cost CAT 5 cable instead of costly coaxial cables.
High immunity from interference - Built-in impedance
coupled device and noise filter.
Gold-plated BNC connector for reliability and longer life.
Small size for easy installation.
Typical Installation:
Color - 1,300' (400 m)
B/W - 2,000' (610m)
{
CAT 5
CAT 5
nitor
o
M
Camera
EN
F
O
R
CER
Power
Crimping
Tools
EVT-PB1Q
2-7/16” x 3/4” x 5/8”
(61 x 19 x 15.5 mm)
EVT-PBP-V1TQ
EVT-PB1-V1TSQ
RJ-45
Compact
Size
Quick-connect screwless
terminal block - No need to
waste time crimping RJ-45
connectors.
6-Inch BNC pigtail connector.
Screw terminals for reliable
installation.
2” x 19/32” x 19/32”
(50 x 15.4 x 15.4 mm)
Screw terminals for reliable
installation.
Surge protection.
Long
Range
CAT 5
Bullet Cam
Dome Cam
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
16842 Millikan Avenue, Irvine, CA 92606
CAT 5
CAT 5
CAT 5
Mount multiple baluns behind
multiplexor without pigtails.
Multiplexer or Quad or DVR
2-1/4” x 19/32” x 19/32”
(57 x 15.4 x 15.4 mm)
1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326
Email: info@seco-larm.com Website: www.seco-larm.com
PassiveVideoBalunsd.cdr
®
EVT-PBP-V1TQ
EVT-PB1Q
Passive Video Baluns
EVT-PB1-V1TSQ
Technical Specifications:
UTP Connection
Size
Weight
Transient Surge
EVT-PB1Q EVT-PBP-V1TQ
Screwless Terminal Block
735
2 /16" x /4" x /8"
61 x 19 x 15.5 mm
2” x /32" x /32"
50 x 15.4 x 15.4 mm
0.8 oz. (22.7g)
No
Terminal Block Terminal Block
19 19
0.9 oz. (22.7g) 0.8 oz. (22.7g)
No
Video Format RS170, NTSC, PAL, SECAM, CCIR
Maximum Input 1vpp
Insertion Loss
< 2dB per pair from DC ~5 Mhz
Return Loss >-15dB from DC ~5 Mhz
Frequency Response DC ~5 Mhz
Attenuation DC ~5 Mhz, 1.5 dB max
Common Mode Rejection 60 dB, 15 KHz~5 MHz
Impedance:
Coax, Male BNC
Terminal Block
75 Ohms @ 1 MHz
100 Ohms @ 1 MHz
Power No power required
oo oo
Temperature Range
Humidity Range
Wire Type
Wire Category
Case
UTP (Unshielded Twisted Pair) 16 - 24 AWG
CAT2 or better, CAT5 ideal, CAT6 improves range
14 ~165 F (-10 ~74 C)
0 ~ 95%
ABS Plastic
EVT-PB1-V1TSQ
1 19 19
2 /4" x /32" x /32”
57 x 15.4 x 15.4 mm
Yes
Surge Suppression (EVT-PB1-V1TSQ):
Built-in Transient Voltage Surge Suppressors
Reverse Stand-Off
Voltage Vrwm(V)
8.55
Copyright 2009 SECO-LARM U.S.A., Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
16842 Millikan Avenue, Irvine, CA 92606
Breakdown
Voltage Vbr (V)
MIN.@1T
9.5
Breakdown
Voltage Vbr (V)
10.5
Test Current
1t (mA)
1.949.261.2999 (C
Email: info@seco-larm.com Website: ww w.seco-larm.com
Maximum Clamping
Voltage @1pp Vc(V)
1 14.5 42.1 10
A & Int’l) 1.800.662.0800 Fax: 1.949.261.7326
Peak Pulse
Current 1pp
(A)
Reverse Leakage
@ VRWM 1r(uA)
PassiveVideoBalunsd.cdr
®
Loading...