SECO-LARM USA EVT-PB1-H05Q User Manual

NOTE: Products with a model number that ends with “Q” or have a round green “Q” sticker represent RoHs compliant products.

MANUAL

EVT-PB1-H05Q

Video, Power and Data Balun

with Voltage Booster

Transmit video up to 2000’ over Cat5
Selectable 12/24VDC output via jumper
Regulated and filtered output.
Output current protection – 500mA
Small size for easy installation.

Dual-colored LED power output indicator:

Red: 12VDC
Blue: 24VDC

Green power input LED indicator.
Built-in overload and short-circuit protection.

The ENFORCER EVT-PB1-H05Q Video, Power and Data (VPD) Balun with Voltage Booster
combines the flexibility of a VPD Balun with the ability to boost insufficient voltage for use in CCTV
applications. Boosted DC power is regulated to provide stable power suitable for voltage sensitive

ENFORCER Video, Power and Data Balun with Voltage Booster

Figure 1: Video, Power and Data Balun with Voltage Booster Detail

Power +

Power –

Video +

Video –

Data +

Data –

Voltage selection jumper

Adjustable output voltage knob

NOTE: The VPD balun with voltage booster’s efficiency rating is 85%. For more information see “Voltage

Booster Efficiency Rate” on page 3.

VDC out

Video in

Data out

Dual-colored output LED

Power input LED

EVT-PB1-H05Q

Voltage Booster

Output voltage

5/12/24VDC selectable by jumper (default 12VDC)

Operating voltages

Input voltage

Regulated output voltage

7~12VDC/VAC

12VDC

12~24VDC/VAC

24VDC

Output current

500mA @ 5/12/24 VDC

Voltage input LED
indicator

Green

Voltage output LED
indicator

Red

5/12VDC

Blue

24VDC

Current protection

PTC 500mA

Video

Range

2,000’ (610m) B/W, 1,300’ Color (400m)

Video format

RS170, NTSC, PAL, SECAM, CCIR

Maximum input

1vp~p

Insertion loss

< 2dB per pair from DC ~ 5 Mhz

Return loss

>-15dB from DC ~ 5 Mhz

Common mode rejection

60dB, 15KHz~5MHz

Frequency response

DC ~ 5 Mhz

Power

No power required for video

Connections

Wire type

UTP (unshielded twisted pair)

Wire category

20 - 24 AWG @ screwless terminal blocks

CAT2 or better, CAT5 ideal, CAT6 improves range

Connectors

In

Removable terminal block

Out
Video

Pigtail BNC

Power

Pigtail DC plug (center pin positive)

Data

Wire

Attenuation

DC ~ 5 Mhz, 1.5 dB max

Impedance

Coax, male BNC: 75 Ohms@ 1 MHz

Terminal block: 100 Ohms @ 1 MHz

Other

Dimensions

3 1/4" x 2 9/16" x 3/4" (81 x 65 x 20mm)

Humidity range

0 ~ 95%

Temperature Range

14°~165°F (-10°~74°C)

Case

ABS Plastic

Specifications:

2 SECO-LARM U.S.A., Inc.