SECO-LARM USA EV-1726-NWGQ, EV-1726-PKGQ, EV-1726-PWGQ, EV-1726-NKGQ User Manual

DNR / DWDR / IR

NVD Bullet Camera

with 4-Axis Mounting Arm

Installation Manual

EV-1726-NKGQ (NTSC)
EV-1726-PKGQ (PAL)

2.8~12mm

EV-1726-NWGQ (NTSC)
EV-1726-PWGQ (PAL)

6~50mm

3 Cameras in 1:

1

/3” Sony Super HAD II CCD

12VDC/24VAC

OSD with service monitor port
600 TV lines

NVD Bullet Cameras have an ultra-low Lux rating of 0.00006 allowing the
camera to see in almost total darkness.

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.

ENFORCER DNR / DWDR / IR NVD Bullet Camera with 4-Axis Mounting Arm

Parts List:

1 x Camera with bracket
1 x Mounting plate
1 x Sunshield
4 x Mounting screws
4 x Hex screws
1 x Hex wrench
1 x Rubber grommet
1 x DC plug with terminal block
1 x Service monitor port
connector

EV-1726-NKGQ (NTSC)

EV-1726-PKGQ (PAL)

EV-1726-NWGQ (NTSC)

EV-1726-PWGQ (PAL)

Type

IR LED Bullet Camera

Pickup Element

1

/3” Sony Super HAD II CCD

Resolution

600 TV lines

Lens (DC Auto Iris)

2.8~12mm

6~50mm

# of Infrared LEDs

56 (850nm)

Effective Pixels
NTSC

768x494 pixels

PAL

752x582 pixels

Video Output

1Vp-p composite video, 75Ω

Minimum Illumination

0.00006 Lux (LEDs on) 0.05 Lux (LEDs off)

S/N Ratio

>52dB (AGC OFF)

On Screen Display (OSD)

Built-in and controlled by internal joystick

Motion Detection

4 zones

Backlight Compensation

HLC/BLC/Off

White Balance

ATW / AWC / MANUAL (1800°~10,500° K)

Digital Slow Shutter (DSS)

256x

Electronic Shutter

Auto/Manual (adjustable range: 1/60~1/120,000 sec)

Auto Gain

Selectable: Low, Middle, High, Off

3-DNR (DNR with 3D filtering)

On/Off (adjustable range: 0~100)

Day & Night (Color)

Selectable: Color, Auto, B/W

Sharpness

On/Off (adjustable range: 0~31)

Privacy

On/Off (8 programmable zones)

IP Rating

IP66

Operating Voltage

12VDC/24VAC Dual Voltage

Current Draw
LEDs OFF

12VDC: 200mA / 24VAC: 3.6W

LEDs ON

12VDC: 600mA / 24VAC: 12W

Operating Temperature

14°~122° F (-10°~50° C)

Dimensions (LxWxH)

12”x37/8”x37/8” (305x100x100 mm)

Weight

3-lb 12-oz (1700g)

Specifications:

Dimensions:

4-Axis Mounting Arm:

The mounting arm set screws can be loosened in three places to adjust the
camera angle. The adjustment ring at the base can also be adjusted.

1

2 3 4

12” (305mm)

6” (152mm)

37/8”

(100mm)

6” (152mm)

415/16”

(125mm)

37/8”

(100mm)

31/2”

(88mm)

2 SECO-LARM U.S.A., Inc.