SECO-LARM USA EV-1323B12DW, EV-1323C12DW User Manual

ENFORCER CCD IR DAY/NIGHT CAMERA MANUAL ENFORCER CCD IR DAY/NIGHT CAMERA MANUAL

TROUBLE SHOOTING

The screen is blank

The screen image is dim

The screen image has poor contrast

The screen image flickers
The screen image is distorted
The camera case is hot
IR LEDs do not turn on

IMPORTANT

Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws
and statutes related to monitoring and recording audio and video signals.
of this product in violation of any current laws or statutes.

WARNING

Stop using the camera if you see a malfunction like smoke or unusual heat, as it could cause fire or electric shock. Do not open the case
of this device, as there are no field-serviceable components inside.

• Check that the camera is powered up.

• Check that the power supply’s polarity is correct.

• Check that the monitor is powered up.

• Check that the video cable connecting the camera to the monitor is connected properly.

• Clean the lens (using a soft, clean cloth).

• Check that the light source is adequate.

• Adjust the monitor’s contrast knob.

• Change the position of the camera.

• Change the position of the camera.

• Change the position of the camera.

• Check that the correct power supply is in use.

• Check that the correct power supply is in use.

SECO-LARM

will not be held responsible for the use

ENFORCER

VIDEO

MANUAL

EV-1323C12DW

1/3" CCD Color IR Day/Night Camera

EV-1323B12DW

1/3" CCD B/W IR Day/Night Camera

®

FCC COMPLIANCE STATEMENT

Information to the user: This equipment has been tested and found to comply with the limits for a class a digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

WARRANTY

ENFORCER IR Cameras are warranted against defects in material and workmanship while used in normal service for a period
of one (1) year from the date of sale to the original customer. Our obligation is limited to the repair or replacement of any
defective part if the unit is returned, transportation pre-paid, to SECO-LARM.

NOTICE

The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one
of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice.
SECO-LARM is also not responsible for misprints or typographical errors.

Copyright © 2004 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part,
without the written permission of SECO-LARM.

SECO-LARMSECO-LARM

SECO-LARM

SECO-LARMSECO-LARM
16842 Millikan Avenue, Irvine, CA 92606

Tel: [phone] Fax: [phone]

®

U.S.A., Inc. U.S.A., Inc.

U.S.A., Inc.

U.S.A., Inc. U.S.A., Inc.

Website: www.seco-larm.com
E-mail: sales

@

seco-larm.com

®

DAY_NIGHT_IMU0604c.PMD

PITNW1

SECO-LARMSECO-LARM

SECO-LARM

SECO-LARMSECO-LARM

Weatherproof

®®

®

®®

ENFORCER CCD IR DAY/NIGHT CAMERA MANUAL ENFORCER CCD IR DAY/NIGHT CAMERA MANUAL

Specifications

Type
Chip
Resolution
Pickup elements

Scanning system
Sync
Video output
Lens
Minimum illumination
Gamma correction
S/N ratio
Shutter control

Backlight compensation
Automatic gain control (AGC)
Enclosure
# of infrared LEDs
Max. LED range
Power source
Power consumption
Operating temperature
Dimensions

Weight

EV-1323C12DW (NTSC)

Color camera

1/3” CCD, Sony
420 TV lines
1/3” CCD

512 x 492 pixels
2:1 interlace
Internal
1V pp composite output, 75 ohms
F1.8, 4.3mm (lens included)

0.1 lux (LED off), 0.0 lux (LED on)

0.45
>50dB (AGC off)
Auto Electronic Shutter (AES)

1/60~1/100,000 sec.
auto
auto
IP67 weatherproof
12
Up to 40 ft.
12VDC±10%
60mA (IR off), 160mA (IR on)
14°~131° F (-10°~55° C)
31/16”(L) x 21/4”(D) (78 x 57 mm)

(without sunshield)
16 oz. (454g)

EV-1323B12DW (EIA)

B/W camera

1/3” CCD, Samsung
420 TV lines
1/3” CCD

512 x 492 pixels
2:1 interlace
Internal
1V pp composite output, 75 ohms
F1.8, 4.3mm (lens included)

0.1 lux (LED off), 0.0 lux (LED on)

0.45
>48dB (AGC off)
Auto Electronic Shutter (AES)

1/60~1/100,000 sec.
auto
auto
IP67 weatherproof
12
Up to 40 ft.
12VDC±10%
110mA (IR off), 210mA (IR on)
14°~131° F (-10°~55° C)
31/16”(L) x 21/4”(D) (78 x 57 mm)

(without sunshield)
16 oz. (454g)

A. Camera
B. Adjustable Sunshield
C. Mounting bracket

F. BNC connector (female)
G. Adjustment nut

H. Mounting holes
D. 36” cord
E. DC jack

F

E

ENFORCER

Infrared
Day/Night

D

C

BEFORE STARTING

1. Please read this manual carefully and keep it for future reference.

2. Use the camera within given temperature and electricity limits.

3. Do not aim the LED light directly at the eyes when the LEDs are on.

4. Do not point the camera at the sun. Heat could damage the
camera, even when not in use.

5. Do not mount the camera in areas exposed to radiation, strong
magnetic fields, or strong electrical signals.*

Parts List

1 x IR camera

B

®

G

Hx3

6. Do not open or disassemble the camera. There are no user­serviceable parts inside.

7. Do not drop the camera or subject it to strong vibrations.

* Note: Many video monitors produce strong electromagnetic fields

close to the display CRT, especially when the monitor is turned
on or during de-Gaussing, which occurs automatically with many
monitors when the monitor is turned on.

1 x Sunshield
1 x Mounting bracket
3 x Mounting screws
3 x Screw anchors
1 x Manual

A

Dimensions:

211/16” (68mm)

21/4” (57mm)

29/16” (65mm)

ENFORCER

31/16” (78mm)

®

Infrared
Day/Night

” (46mm)

16

/

13

1

” (14.5mm)

16

/

9

INSTALLATION

1

. Run a 12VDC power supply wire and a video cable with a male

BNC connector through the wall to where the camera is to be
mounted (if necessary).

2. Assemble the mounting bracket; then screw it into the back of the
camera. Make sure the mounting base is tightened to the bracket.

3. Temporarily connect the camera to the 12VDC power supply.

4. Temporarily connect the camera’s female BNC connector to the
video cable’s male BNC connector.

5. While watching the monitor, hold the camera bracket against the
wall by hand where it is to be mounted, then twist the camera
until it is certain that this mounting location is correct. Use a
pencil to mark the location of the three screw holes in the bracket.

6. Disconnect the 12VDC power supply and video cable.

7. Mount the bracket to the wall using the three included mounting
screws. If the wall is made of dry wall, brick, or similar material, it
may be necessary to use the three included screw anchors.

8. Reconnect the 12VDC power supply and video cable. Turn the
monitor on, and make sure the camera is sending the proper video
signal.

9. Adjust the camera angle:
(a) Loosen and tighten the bracket’s thumb screw to turn the

camera and change its angle relative to the bracket. This
ensures the camera is pointing in the right direction.

(b) Loosen and tighten the adjustment plate to rotate the camera

on its axis. This rotates the angle of the video image.

10.Tighten the bracket’s thumb screw and the adjustment plate so
that the camera does not move, but not so tight that it cracks the
case or bracket.

11.Do a final test of the video camera and monitor.