SECO-LARM USA EAP-5D1 User Manual

EAP-5D1

1 Output, 5A@12VDC, 4.5A@24VDC

Features:

AC power failure supervision relay.
Battery failure supervision relay.
Selectable 2.2K-Ohm End-of-Line (EOL) resistor for AC failure
and battery failure supervision relays.
Selectable delay timer (5 sec., 5 min., 5 hours) for AC failure
supervision relay.
LED overload indicator and automatic shutdown for short­circuit protection.
Over-current fuse-protected AC input.
Built-in back-up battery charger
Automatically switch to back-up battery if AC fails.

Dimensions: 12-3/16" x 12-7/16" x 3-9/16"

Individual AC input and DC output LED status indicators.

Power

Field selectable for 12VDC or 24VDC output.
Operating voltage input 110~240 VAC.
Adjustable voltage range (11~15 VDC, 23~26 VDC) to
compensate for voltage drop.
Supply current: 5 Amps @ 12VDC, 4.5 Amps @ 24VDC.
AC input fuse rating 3.15 Amps (glass fuse).
DC output overload sensing with red LED indicator and
automatic shutdown during short circuit.

Enclosure

Heavy-duty steel case to protect the power connections.
Removable steel cover for easy access.
Ventilation holes to prevent heat build-up.
Enclosure has enough room for two 7AH batteries.
6-foot power cord and battery leads included.
Dimensions: 12-3/16” x 12-7/16” x 3-9/16”.
Knock-out on the cover for optional cam lock.

AccessControlPowerSupply.cdr

+

AC input LED

status indicator

DC output

terminal block

DIP switch

for 12 or 24 VDC

output selection

VR1 rotary knob

for DC output
voltage range

adjustment

AC failure
delay timer
DIP switch

End-of Line
(EOL) 2.2K Ohm
resistor DIP switch

Battery presence

and low battery

monitor DIP switch

1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: [phone]
Email: [e-mail] Website: www.seco-larm.com

Connections:

110~240 VAC

INPUT

Battery failure & low battery
Supervision Relay Output to

Audio/Visual warning device

SL-126A

Power Supply

Power Supply

AC failure Supervision

Relay Output to

Audio/Visual

warning device

DC output LED
status indicator*

Copyright 2007 SECO-LARM U.S.A., Inc. All rights reserved.

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Back-up

battery terminal

AC input fuse

-

12 VDC Battery

(Optional)

16842 Millikan Avenue, Irvine, CA 92606

®