Weld or Bolt to Gate
4 Knockouts on Junction Box
Corrosion-Resistant Finish
Water and Vandal Resistant
E-942FC-1K3SQ
Electromagnetic Lock with brackets for armature and magnet.
E-942FC-1300
Electromagnetic Lock only.
Features:
For outdoor sliding and swinging electric gates.
Brackets can be welded or bolted directly to gate.
Brackets are zinc-plated for corrosion resistance.
Brackets have black finish to match most gates.
Lock is water and vandal resistant.
Lock has attractive stainless-steel finish.
Maintenance-free, factory-sealed design.
Holding force - 1,300 pounds.
Prewired for 12VDC operation.
Adapter and mounting hardware included.
Technical Specifications:
E-942FC-1K3SQ
Operating Voltage
Holding Force
Current Draw
Weight (Approx.)
Total
Maglock & Armature
Bracket
Certifications
Copyright 2007 SECO-LARM U.S.A., Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
12VDC or 24VDC
1,300 lb. (591 kg)
500mA/12V, 250mA/24V
15.6 lbs. (7.1 kg)
11 lbs. (5.0 kg)
4.6 lbs. (2.1 kg)
CE
(magnetic lock only)
Dimensions:
Installation:
Maglock Bracket
Mounting
Bolts
(optional)
No
Weld
Area
Magnetic lock and bracket
1
2
2 /
”
(63mm)
5
8
1 /
” (40mm)
5
8
1 /
” (40mm)
1
2
/
” (13mm)
Armature Plate and Bracket
1
2 /2”
(63mm)
Junction Box
Screws x 4
Junction Box
(16mm)
1
2
”
/
(12mm)
Electromagnet
5
/8”
2 /8”
(61mm)
Anti-Tamper
Caps x 2
Mounting
Screws x 2
Mounting
Screws x 2
Anti-Tamper
Caps x 2
8” (202mm)
1
2
/
10
” (267mm)
1
3
7 /4”
(185mm)
3
7 /8”
(188mm)
Armature Plate
Rubber
Washer
Armature
Screw
Large
Steel
Washers
Guide
Pin
ST-1212-R1.0A 12VDC Power Supply (included)
1
2 /2”
(63mm)
Mounting
Bolts
(optional)
Mounting
Bolts
(optional)
2”
(50mm)
Armature
Bracket
Security
Screw
No
Weld
Area
16842 Millikan Avenue, Irvine, CA 92606
1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326
Email: info@seco-larm.com Website: www.seco-larm.com
GateLockg.cdr