Seco-Larm VS-1V22AQ Specsheet
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2014 © SECO-LARM U.S.A, Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: sales@seco-larm.com
PiVS-1V22AQ_1407.docx
HD-SDI Surge Protector
VS-1V22AQ
Features:
Helps prevent damage to sensitive HD-SDI equipment
such as cameras, DVRs, and switches
Intercepts repeated surges and spikes that could damage
HD-SDI equipment
Passive operation – no external power required
Includes a 16” grounding wire for convenient connection
to ground
The ENFORCER HD-SDI Surge Protector is a passive device
that helps protect sensitive HD-SDI CCTV equipment from power
surges. The device can be used in new or existing installations.
The VS-1V22AQ should be installed between a camera and a
DVR or video splitter to protect against surges that could damage
the video equipment.
Also Available from SECO-LARM®:
IPV-PD88Q
IP Surge Protector
IPV-P188Q
PoE Surge Protector
VS-1V12BQ
Video Surge Protector
Sample Application:
Unprotected
End
HD-SDI DVR
(Not Protected)
To ground
HD-SDI Surge
Protector
HD-SDI Camera
(Protected)
Coax cable
Protected
End
Specifications:
Model
VS-1V22AQ
Bandwidth
Up to 2.97Gb/s
SDI Transmission Rate
270Mx~2.97Gx
Maximum input
24Vp-p
Insertion loss
<1.1dB
Return loss
16dB@75Ω
Frequency response
Up to 3dB@10MHz
Insulation resistance
10,000MΩ
Maximum surge voltage
Up to 8 kV
Discharging current
Up to 10KA
Surge life
300 surges@200A
Surge reaction speed
1ns
Surge resistance
0Ω
Signal passing
capability
Breakdown voltage
24V
Clamping voltage
150V
Connector
In
BNC Male (75Ω)
Out
BNC Female (75Ω)
Impedance
~75Ω (BNC-to-BNC)
Dimensions
3”x1”x1” (76x26x26 mm)
Weight
2.4-oz (68g)
Material
Aluminum
Operating temperature
-40°~194° F (-40°~90° C)
Loading...