Seco-Larm VS-1V12YQ User Manual

 Helps prevent damage to sensitive HD-TVI, HD-CVI, HD-AHD, and

Analog CCTV cameras, DVRs, and switches

 Intercepts repeated surges and spikes that could damage HD-TVI,

HD-CVI, HD-AHD, and Analog CCTV equipment

 Passive operation – no external power required
 Includes a 16" grounding wire for convenient connection to ground

VS-1V12YQ

4-in-1 HD Surge Protector

Manual

ENFORCER 4-in-1 HD Surge Protector

Specifications:

Overview:

Introduction:

The ENFORCER 4-in-1 HD Surge Protector is a passive device that helps protect sensitive
HD and Analog CCTV equipment from power surges. The device can be deployed in new
installations or existing ones.

The ENFORCER 4-in-1 HD Surge Protector should be installed between a camera and a DVR
or video splitter to protect against surges that could damage the video equipment.

NOTE: For the best protection, installing two surge protectors is recommended: one at each

end of the cable.

Bandwidth

Up to 270MHz

Maximum input

6Vp-p

Insertion loss

0.8dB@42MHz

Return loss

16dB

Frequency response

Up to 3dB@10MHz

Insulation resistance

10,000MΩ

Maximum surge voltage

4kV

Discharging current

15kV

Surge life

300 surges@200A

Surge reaction speed

<1ns

Surge resistance

0Ω

Signal passing
capability

Breakdown voltage

6V

Clamping voltage

25V

Connector

In

BNC Male (75Ω)

Out

BNC Female (75Ω)

Impedance

~75Ω (BNC-to-BNC)

Dimensions

31/8"x1"x1" (79x25x25 mm)

Cable length

153/4" (400mm)

Weight

2.3-oz (65g)

Material

Aluminum

Operating temperature

-40°~194° F (-40°~90° C)

Unprotected

End

To BNC

Output

To BNC
Input

Protected

End

Grounding

Wire

1" (25mm)

31/8" (79mm)

1" (25mm)

2 SECO-LARM U.S.A., Inc.