Seco-Larm VB-CN1Q User Manual

ENFORCER Dome Camera Corner Mounting Bracket ENFORCER Dome Camera Corner Mounting Bracket

®

Dimensions:

15

/16”

(24mm)

57/16”

(138mm)

ENFORC ER

Video

MANUAL

”

16

/

15

3

(100mm)

19/16”

(40mm)

23/32”

(53mm)

31/8”

(79mm)

VB-CN1Q

Dome Camera Corner

Mounting Bracket

IMPORTANT

Users and installers of this product are responsible for ensuring this product complies with all national, state,
and local laws and statutes related to monitoring and recording audio and video signals. SECO-LARM will
not be held responsible for the use of this product in violation of any current laws or statutes.

WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in
normal service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s
obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to
SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse,
neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM
determines that such equipment is not operating properly as a result of causes other than defects in material and
workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair
only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or
consequential personal or property damages of any kind to the purchaser or anyone else.

NOTICE

The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy
is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications
without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2008 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in
part, without the written permission of SECO-LARM.

SECO-LARM® U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Tel: [phone] Fax: [phone]

Website: www.seco-larm.com
E-mail: sales

@

MiniVandalDomeCornerBracket.pmd

seco-larm.com

®

PITTW1

Use with:

EV-1223C12
EV122C-2
EV-122B-4

Installation:

1. Select corner and run power and video to location.

2. Mount inner bracket to wall and ceiling using 6 wall screws
(use wall anchors as necessary).

3. Connect power and video to camera and adjust camera angle.

4. Install outer bracket over camera and attach to inner bracket
using the machine screws.

®®

®

SECO-LARMSECO-LARM

SECO-LARM

SECO-LARMSECO-LARM

®®

Parts List:

1 x Inner Bracket
1 x Outer Bracket
3 x Machine Screws
6 x Wall Screws
6 x Wall Anchors