Seco-Larm VA-2101B-WQ, VA-2404B-WQ User Manual

Manual
Video Amplifiers
B/W signals
Transmission distance up to
3,280ft (1,000m)
Connect to a video camera,
multiplexer, DVR, etc.
Gold-plated BNC connectors Sharpness and brightness
adjustments for each channel
12VDC Power adapter included Pass-through circuit: Power output
can power nearby devices
NOTE: Products with model numbers that end with “Q” or products that have a round green “Q” sticker signify RoHS compliance.
VA-2101B-WQ
VA-2101B-WAQ*
1-In, 1-Out
VA-2404B-WQ
VA-2404B-WAQ*
4-In, 4-Out
*VA-2101B-WAQ and VA-2404B-WAQ do not include a power adapter.
ENFORCER Video Amplifiers
SECO-LARM U.S.A., Inc.
ENFORCER Video Amplifiers are the idea way to boost the strength of video signals. Using the included 12VDC power adapter, video signals are amplified for transmission distances of up to 3,280ft (1,000m). Brightness and sharpness adjustments can be made independently for each channel to provide fine-tuning of video signals.
Introduction:
Specifications:
Dimensions:
Overview:
Power input
Sharpness
control knobs
Power loop out
Brightness control knobs
Video input
Video output
Power LED
41/8”
(104mm)
13/8”
(35mm)
415/16” (125mm)
415/16” (125mm)
VA-2101B-WQ
VA-2101B-WAQ
VA-2404B-WQ
VA-2404B-WAQ
VA-2101B-WQ
VA-2101B-WAQ
VA-2404B-WQ
VA-2404B-WAQ
Number of inputs 1 4
Number of outputs 1 4
Maximum range
3,280’ (1,000m)
Video input level
0.8~1.2 Vp-p, 75
Video output level
1 Vp-p, 75
Video bandwidth
10 Hz~10MHz
Power supply(12VDC)
Included
Not included
Included
Not included
Current consumption
100mA
220mA
Dimensions
415/16" x 41/8" x 13/8" (125 x 104 x 35 mm)
Weight
4.1 oz (116g)
6.3 oz. (179g)
ENFORCER Video Amplifiers
SECO-LARM U.S.A., Inc.
1. Mount and install the amplifier where the video inputs and outputs can be easily accessed.
2. Connect the video output of each camera to the female BNC input connector(s) on the amplifier.
3. Connect coax cable from the female output BNC connector(s) to the DVR or display.
4. Connect power to the distributor with the included 12VDC power adapter.
5. Turn on power to the video input and the video output units the amplifier is connected to.
Installation:
Sample Application (VA-2404B-WQ / VA-2404B-WAQ):
Sample Application (VA-2101B-WQ / VA-2101B-WAQ):
Note: Total distance between the camera and DVR/monitor should not exceed 3,280ft (1,000m).
ENFORCER
Bullet Camera
ENFORCER
Dome Camera
Elite 3X
Dome Camera
Elite 3X
Bullet Camera
12VDC Power supply
Monitor
Monitor
ENFORCER
Bullet Camera
ENFORCER Video Amplifiers have sharpness and brightness adjustments for each channel. Turn the knobs with a small screwdriver clockwise to increase sharpness or brightness values, or counterclockwise to decrease them.
Brightness and Sharpness Adjustments:
Power Loop Out:
ENFORCER Video Amplifiers have the ability to power other 12VDC devices. Connect other devices to the power loop out terminal blocks.
NOTE: The current draw of the video amplifiers will lower the amount of voltage present at the power loop out. To ensure proper operation of the connected devices, first check the voltage present at the terminal blocks.
DVR
Max range between camera and
DVR/monitor: 3,280ft (1,000m)
Max range between camera and
monitor: 3,280ft (1,000m)
Brightness
Sharpness
1 2 3
4
12VDC Power supply
ENFORCER Video Amplifiers
SECO-LARM U.S.A., Inc.
Video amplifier does not function correctly:
Make sure the power, input, and output cables are connected
firmly to the amplifier.
Make sure the video input device is turned on. Make sure the video output device is turned on. Test the coaxial cable between the video input and the
amplifier to make sure it is functional.
Test the coaxial cable between the video output and the
amplifier to make sure it is functional.
Power LED indicator not lit:
Make sure power is connected to the amplifier.
Troubleshooting:
Also Available from SECO-LARM:
Passive VGA Balun
Passive Video Balun
BNC-to-VGA Converter
MVE-SV010Q
EB-P501-01Q
VC-1BAQ
SECO-LARM® has a complete line of security products.
Please visit www.seco-larm.com for more information.
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors. Copyright © 2013 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of SECO-LARM.
SECO-LARM® U.S.A., Inc.
16842 Millikan Avenue, Irvine Ca 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
Website: www.seco-larm.com
Email: sales@seco-larm.com
PITSW4
MiVA-2xxxB-xQ_1307B.docx
Loading...