Seco-Larm VA-1102B-WYQ User Manual

®

4-in-1 HD Video Distributors

VA-1102B-WYQ shown

Manual

Features:

 TVI / CVI / AHD / Analog compatible
 Distributes one video input to two (or four*)

video outputs

 Connect to a video camera, multiplexer,

DVR etc.

* VA-1104B-WYQ – special order only

 LED power indicator
 Signals are cleaned and buffered to ensure

clear video over the camera's
recommended maximum distance

ENFORCER 4-in-1 HD Video Distributors

–

Introduction:

ENFORCER 4-in-1 HD Video Distributors are the ideal way to distribute a single video signal to
multiple locations. Using noise-rejection circuitry, the 4-in-1 HD Video Distributors actively
duplicate video signals to be sent to either two (or four*) separate locations. The distributors buffer
incoming signals before duplication for clean transmission.

* VA-1104B-WYQ – special order only

Parts List:

1x 4-in-1 HD Video

Distributor

2x Mounting screws

(VA-1102B-WYQ)

Specifications:

Model VA-1102B-WYQ VA-1104B-WYQ*

Number of inputs 1x BNC
Number of outputs 2x BNC 4x BNC
Video output format
Video input level
Video output level
Image gain
Video bandwidth
Power supply
Current draw
Operating humidity 0~95% non-condensing
Operating temperature 32°~131° F (0°~55° C)

1x Manual 1x Power adapter 1x DC Jack connector

2x Plastic wall anchors

(VA-1102B-WYQ)

4x Mounting screws

(VA-1104B-WYQ)

4x Plastic wall anchors

(VA-1104B-WYQ)

HD-TVI / CVI / AHD / Analog

0.8~1.2Vp-p, 75Ω
1Vp-p, 75Ω

6dB

350MHz, -3dB

12VDC, 500mA

60mA 220mA

Dimensions 25/16"x115/16"x111/16" (58x49x42 mm) 57/16"x33/8"x13/16" (138x86x30 mm)
Weight 2.5-oz (70g) 4.9-oz (140g)

* VA-1104B-WYQ

Overview:

VA-1102B-WYQ shown

special order only

Power input

‐

111/16"

(42mm)

Video input

25/16"

(58mm)

11/32"

(26mm)

Power LED

+

Video output

2 SECO-LARM U.S.A., Inc.

115/16"

(49mm)

ENFORCER 4-in-1 HD Video Distributors

Installation:

1. Place the 4-in-1 HD Video Distributor where the video inputs and outputs can be easily accessed.

2. Plug the male BNC connector into the input female BNC connector on the distributor.

3. Plug the male BNC connectors into the output female BNC connectors on the distributor.

4. Connect power to the distributor with the included 12VDC power adapter and DC jack connector.

5. Turn on power to the displays and the video output unit the distributor is connected to.

NOTE: Maximum distance between the camera and DVR/monitor is determined by the camera's
recommended maximum distance.

Sample Application (VA-1102B-WYQ):

ENFORCER

Bullet Camera

‐

+

Monitor 1

Max. range between camera and monitor

determined by camera's max. distance

Sample Application (VA-1102B-WYQ Stacking):

ENFORCER

Bullet Camera

‐

+

12VDC Power supply

Monitor 2

12VDC Power supply

Monitor 2

Monitor 1

‐

+

Max. range between camera and DVR/monitor

determined by camera's max. distance

12VDC Power supply

DVR

SECO-LARM U.S.A., Inc. 3

ENFORCER 4-in-1 HD Video Distributors

A

(

Troubleshooting:

 Make sure the power, input and output cables are

connected firmly to the distributor

4-in-1 HD Video Distributor does
not function correctly

 Make sure the video input device is turned on
 Make sure the video output device is turned on
 Test the coaxial cable between the video source and

the distributor to make sure it is functional

 Test the coaxial cable between the video display and

the distributor to make sure it is functional

Power LED indicator not lit

 Make sure power is connected to the distributor

Also Available from SECO-LARM®:

4-in-1 HD Video Amplifier 4-in-1 HD Surge Protector 4-in-1 HD Ground Loop Isolator

VA-2102B-WYQ VS-1V12YQ VG-1C12YQ

Passive HD Video Balun Endpoint HD VPD Combiner BNC to VGA Converter

EB-P101-01HQ EB-C304-01EQ VC-3BAQ

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

IMPORTANT: Users and installers of this product are responsible for ensuring this product complies with all national,

state, and local laws and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be
held responsible for the use of this product in violation of any current laws or statutes.

WARRANTY:

service for one (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM’s
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.

NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM
reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints.
trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2017 SECO-LARM
U.S.A., Inc. All rights reserved.

SECO-LARM

This SECO-LARM product is warranted against defects in material and workmanship while used in normal

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com
Phone:

949) 261-2999 | [phone] Email: [e-mail]

MI_VA-110xB-WYQ_170320.docx

4 SECO-LARM U.S.A., Inc.

®

ll

PITSW4