Seco-Larm SR-5201R, SR-5203A Specsheet

Interfaces for Vehicle Security Systems and Accessories Page 1 of 2

Interfaces from SECO-LARM

SR-5202 / SR-5204

Power door lock kits

z SR-5202-- Includes two 5-wire (master) door

lock/unlock motors.

z SR-5204 -- Includes two 5-wire (master) door

lock/unlock motors, plus two 2-wire (slave) door
motors.

z Complete with control module (2 built-in relays),

door lock motors, 15A fuse, and all necessary
hardware.

z Compatible with nearly every vehicle alarm

lock/unlock outputs.

z For cars without factory-installed power door

locks, or for vacuum-operated door locks
(Mercedes or Audi) which require extra door lock
motor for remote activation.

z Manual operation of either front door will operate

all door lock motors.

SR-5202-ME/SR-5202-MS

Power door lock motors

z SR-5202-ME -- 2-wire (slave) door lock motor.
z SR-5202-MS -- 5-wire (master) door lock motor.
z Add power door lock convenience to cars without factory power door

lock systems.

z Also for cars with vacuum-operated systems (Mercedes or Audi) which

require extra door lock motor for remote activation.

z Works with SR-5201-RMB or SR-5203UMB interfaces.
z 12VDC, includes mounting hardware.

®

Click for Help

SR-5201R / SR-5203A

Power door lock interfaces

z SR-5201R -- For alarms with specific separate negative

lock/unlock signal outputs. No built-in timer - depends on
alarm system for lock/unlock timing.

z SR-5203A -- For alarms with no specific lock/unlock

signals. One- or two-wire input. Built-in programmable
(0.7/3.5-sec.) timer. Lock signal priority if lock and unlock
signals received at same time.

z Allows nearly any alarm to control nearly any type power

door lock/unlocks.

z Includes 2 pre-wired, built-in, heavy-duty 30A relays with

protecting diodes and spike/noise suppressors.

z Negative lock/unlock signal inputs.

SR-5201R SR-5203A

http://www.seco-larm.com/Interfac.htm 4/12/2002

Interfaces for Vehicle Security Systems and Accessories Page 2 of 2

SR-5240 / SR-5440A

Power window roll up (or roll down) interfaces

z SR-5240 -- Controls two windows, or one window and the

sunroof.

z SR-5440A -- Controls four power windows. The four windows roll

up one-at-a-time.

z Compatible with most power window systems. Works off

momentary or constant ground trigger.

z Built-in safety cut-off feature. Power window module will

temporarily stop functioning if there is a current overload.

z System override should ignition be turned on, doors unlocked, or

any door opened. (SR-5440A only)

z Interfaces with all ENFORCER

®

RF alarm systems.

SR-5911

Power trunk release module

z Add power trunk release to cars without factory-installed systems.
z Connect via relay to any alarm's auxiliary channel output.

SR-5240

SR-5440A

Page last modified: 04/10/2002 20:48:17

http://www.seco-larm.com/Interfac.htm 4/12/2002