Seco-Larm SM-226LQ Specsheet
SECO-LARM
SM-226LQ
®
PRODUCT INFO.
(OVERHEAD DOOR MOUNT)
SM-226LQ: UL-listed. N.O. Contact with ABS plastic
Magnet Housing, and "L" Bracket Magnet Mounting.
ALARM CIRCUIT: For closed circuit alarm systems
only.
REED SWITCH: Gold under-plating with
DEACTIVATED RHODIUM outer-plating.
SECO-LARM contacts have a unique RHODIUM
plating which has gone through a special oxygen
treatment to DEACTIVATE the surface, thus
eliminate the absorption of organic impurities,
polymer growth during operation, and the possibility
of contact freezing.
SWITCH HOUSING: Weatherproof die-cast aluminum
constructed for surface-mounting on garage floor;
able to withstand heavy vehicle pressure without
damage. The switch is safely enclosed in an epoxy
compound. A 24" flexible armored cable gives
complete protection to the switch wiring.
MAGNET: Extra-strength Alnico 5 magnet allows a
2-1/2" operating gap.
MAGNET HOUSING/MOUNTING:
Magnet is housed in a high-impact weatherproof
ABS plastic case and mounted on a garage door
with an "L"-shaped bracket which minimizes the
effect of steel doors on magnets.
CONTACT LIFETIME: 50 million cycles.
Type: S
49J5
SM-226LQ
"L" Bracket
(OVERHEAD DOOR MOUNT)
RATING: 0.1Amp./100VDC (max.)
1Amp./10VDC (max.)
10W (max.)
o
TEMPERATURE: -15
On wood surfaces the magnet housing shall be
installed at least 1/4 in. from the switch housing to
comply with UL 681 Installation requirements.
Note: Products with model numbers that end with "Q" or that have a round green"Q"sticker are RoHS compliant.
FILE: \DTP\MANUAL\SM\MU226LQ_1303.PMD ORDER PART# 763-072-3%
F to 160oF
(-25oC to 70oC).
SM-226LQ
PITSW1
®
SM-876
3” X 3/8”(D)
(9.5 X 9.5 X 76 mm)
SM-206-3 CONCEALED MOUNT
circuit (OC) operation
For closed circuit (CC) and open
Operation gap: 1-1/8” (20mm)
SM-206-5 MINI CONCEALED
For closed circuit (CC) operation
Operation gap: 3/4” (19mm)
Pre-wired 15” (400mm) leads
SM-206Q CONCEALED MOUNT
For closed circuit (CC) operation
Operation gap: 1-1/8” (20mm)
MAGNETIC CONT ACTS
Pre-wired 15” (400mm) leads
SECO -LARM
SM-200Q SURFACE MOUNT
For closed circuit (CC) operation
Operation gap: 3/4” (19mm)
Terminal cover included
Pre-wired 15” (400mm) leads
SM-206-41 – Similar to SM-206 but
with 3/8” (9.5mm) bare magnet
For 2” (51mm) gap
Operation gap: 1/2” (12mm)
SM-200L – Operation gap: 1-1/4” (31mm)
SM-300 – For open circuit (OC)
SM-216Q WIDE-GAP MOUNT
For closed circuit (CC) operation
Operation gap: 2-3/4” (70mm)
Wide gap for difficult installations
(7 x 13.5 x 32mm)
SM-205Q MINIATURE MOUNT
For closed circuit (CC) operation
Operation gap: 1” (25mm)
Pre-wired 15” (400mm) leads
Miniature size: 9/32” x 17/32” x1-1/4”
(6.35 x 9.5 x 35mm)
SM-203Q SELF-STICK MOUNT
For closed circuit (CC) operation
Operation gap: 1” (25mm)
Pre-wired 15” (400mm) leads
Miniature size: 1/4” x 3/8” x 1-3/8”
SM-207Q PRESS-FIT MOUNT
For closed circuit (CC) operation
Operation gap: 1” (25mm)
Pre-wired 15” (400mm) leads
SM-207-41 – Similar to SM-207 but
with 3/8” (9.5mm) bare magnet
For 2” (51mm) gap
circuit (OC) operation
For closed circuit (CC) and open
Operation gap: 2-1/2” (64mm)
Die-cast aluminum enclosure
SM-226R-3 OVERHEAD DOOR MOUNT
SM-226RQ OVERHEAD DOOR MOUNT
SM-226L-3 OVERHEAD DOOR MOUNT
SM-226LQ OVERHEAD DOOR MOUNT
with round-back bracket
For closed circuit (CC) operation
Operation gap: 2-1/2” (64mm)
Die-cast aluminum enclosure
with round-back bracket
circuit (OC) operation
Operation gap: 2-1/2” (64mm)
Die-cast aluminum enclosure
with L-bracket
For closed circuit (CC) and open
For closed circuit (CC) operation
Operation gap: 2-1/2” (64mm)
Die-cast aluminum enclosure
with L-bracket
SM-267 PLUNGER MOUNT
For closed circuit (CC) operation
Perfect for protecting art objects
Pre-wired 15” (400mm) leads
SM-266 SCREEN MOUNT
For closed circuit (CC) operation
Operation gap: 1-1/4” (28mm)
Ideal for screened windows
Pre-wired 15” (400mm) leads
(6.35 x 4.75 x 25mm)
BARE MAGNETS (ALNICO V)
SM-209 SUPER MINI MOUNT
For closed circuit (CC) operation
Operation gap: 3/4” (19mm)
Pre-wired 15” (400mm) leads
Miniature size: 1/4” x 3/16” x 1”
SM-208 SURFACE MOUNT
For closed circuit (CC) operation
Operation gap: 1/2” (13mm)
Pre-wired 15” (400mm) leads
SM-841
φ
( 9.5 X 41 mm)
1-5/8” X 3/8”(D)
SM-831
φ
( 6.35 X 31 mm)
1-7/32” X 1/4”(D)
SM-830
φ
( 5 X 30 mm)
1-3/16” X 3/16”(D)
SM-826
1/4” X 1/4” X 1”
(6.35 X 6.35 X 25 mm)
SM-815-63
φ
( 6.2 X 15 mm)
19/32” X 1/4”(D)
SM-815-42
φ
( 4.2 X 15 mm)
19/32” X 5/32”(D)
Loading...