Seco-Larm SD-962AR-36M User Manual

11

/16”

(18mm)

Installation Manual

SD-962AR-36M

Modern Flat Rim-Type Exit Bar

Features:

What It Does:

SECO-LARM’s SD-962AR-36M exit device, when mounted on the inside of a door to block entry to a protected premises,
securely locks the door from outside access while allowing users inside the protected premises to exit. The hardy
aluminum enclosure protects the exit device from abuse, yet easily unlocks the door from the inside by users who require
exit. It can be connected to a rim cylinder lock on the outside of the door in order to allow entry by authorized personnel.

Dimensions:

31/8”

(80mm)

Sturdy aluminum construction.
Allows exit from inside while locked from outside.
Reversible non-handed design.
For metal or wood doors up to 1

3

/4” thick.

Includes all needed hardware for typical

installation.

Works with rim cylinder locks (not included).
Fits doors from 36” to 48” wide.

351/8” (892mm)

71/2”

(190mm)

25/8”

(67mm)

15/8”

(42mm)

22”

(559mm)

ENFORCER Modern Flat Rim-Type Exit Bar

Fig. 3 – Possible Applications

Fig. 2 – Parts Description

Chassis cover

Chassis

Mechanism housing

Push bar

Dogging device –
Use Allen key to lock
in the open position
so the door can be
opened from outside
the protected
premises.

End cap

Strike

End cap bracket

Single Door

Double Door
with Mullion

Double Door
without Mullion

Door

Exit device

17/16”

Rim Cylinder

Rim Cylinder

Rim Cylinder

Door

Door

Exit device

Exit device

17/16”

Double-door strike

(not included)

Rim Cylinder

Rim Cylinder

Rim Cylinder

17/16”

Door

Exit device

Door

Exit device

2 SECO-LARM U.S.A., Inc.

Fig. 4 – Mounting

Location

Fig. 5 – Using the

Template

Fig. 6 – Mounting the

Strike

Door

Draw line here

41”

Fig. 7– Final Installation

1. Mark the vertical center line of the exit bar by drawing a line across the door at 41” above the floor.

See fig. 4.

2. Fold the included template, and align the center lines on the template with the center line just drawn on

the door. Then mark the position of the mounting holes for the latch assembly. See fig. 5.

3. Move the template against the door stop and then mark the mounting holes for the strike.

4. Drill the holes as marked on the door and the mullion. See fig. 6.

Toothed lock
washer

Toothed lock
washer

Hex nut

Hex head
screw

ENFORCER Modern Flat Rim-Type Exit Bar

SECO-LARM U.S.A., Inc 3 SECO-LARM U.S.A., Inc. 33 3

ENFORCER Modern Flat Rim-Type Exit Bar

Specifications :

Construction

Aluminum

Hand

Non-handed

Latch bolt

Steel 19mm throw

Spring

Stainless steel

Chassis

Aluminum

Cover

Aluminum

Rail assembly

Aluminum

End cap

Aluminum

Dimensions

351/8”x71/2”x25/8” (892x190x67 mm)

Weight

6-lb, 7-oz (2.9kg)

WARNING: Incorrect mounting that leads to exposure or moisture inside the enclosure could damage the device and will void the warranty.

PITDW1

WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the
date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned,
transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal
usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in
material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the
purchaser or anyone else.

NOTICE

The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one of continual development and
improvement. For this reason, SECO-LARM reserves the right to change specifications without notice.
SECO-LARM is also not responsible for misprints or typographical errors.

Copyright © 2011 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of
SECO-LARM.

SECO-LARM U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606
Tel: [phone]

Website: www.seco-larm.com
E-mail: [e-mail]

MiSD-962AR-36I_1107.docx

Parts List:

1 x Rim-Type Exit Device

1 x Manual

3 x Mounting templates

Screws Included:

1 x End cap bracket

1 x Plate spacer for strike (3.2mm)

1 x Plate spacer for strike (1.6mm)

1 x Strike

1 x End cap

1 x Hex wrench

Mounting chassis to door:
2 x Hex head screws (for the outside holes)
2 x Hex nuts (for the outside holes)
4 x Mounting screws (for the inside holes—wood doors)
4 x Mounting screws (for the inside holes—metal doors)
4 x Toothed lock washers (for the inside holes)

Connecting cover to chassis:
2 x Set screws

Connecting end cap to end cap bracket:

2 x Set screws

Mounting end cap bracket to door:

2 x Mounting screws (wood doors)
2 x Mounting screws (metal doors)
4 x Toothed lock washers

Mounting strike to door:

2 x Mounting screws (wood doors)
2 x Mounting screws (metal doors)
2 x Toothed lock washer

4 SECO-LARM U.S.A., Inc.