8”
(203mm)
225/32”
(71mm)
23/16”
(56mm)
Installation Manual
SD-962AR-36G
Grade 1 Rim-Type Exit Device
Features:
What It Does:
SECO-LARM’s SD-962AR-36G exit device, when mounted on the inside of a door to block entry to a protected premises,
securely locks the door from outside access while allowing users inside the protected premises to exit. The stainlesssteel enclosure protects the exit device from abuse, yet easily unlocks the door from the inside by users who require exit.
It can be connected to an entry-type lever trim or to any physical locking device on the outside of the door in order to
allow entry to authorized personnel.
Dimensions:
213/32”
(61mm)
Heavy-duty ANSI Grade 1 steel construction.
Allows exit from inside while locked from outside.
Reversible non-handed design.
For metal or wood doors up to 1
3
/4” thick.
Separate deadlocking latch –
Prevents the use of credit cards or similar means to
open the latch bolt.
Allen-type
1
/4-turn dogging lock – Allows the exit
device to be unlocked for extended period of time.
Includes all needed hardware for typical
installation.
Works with standard external door handle/lock
devices (not included).
Fits doors from 33” to 48” wide.
33” (838mm)
21/4”
(57mm)
ENFORCER Grade 1 Rim-Type Exit Device
Fig. 3 – Possible Applications
27/16”
Single Door
Double Door
with Mullion
Double Door
without Mullion
Door
Exit device
Trim
Door
Exit device
Trim
Trim
Door
Exit device
Trim
Trim
Door
Door
Exit device
Exit device
27/16”
215/16”
Double-door strike
(not included)
Fig. 2 – Parts Description
Chassis cover
Chassis
Mechanism housing
Push bar
Dogging device –
Use Allen key to lock
in the open position
so the door can be
opened from outside
the protected
premises.
End cap
Strike
End cap bracket
2 SECO-LARM U.S.A., Inc.
Fig. 4 – Mounting
Location
Fig. 5 – Using the
Template
Fig. 6 – Mounting the
Strike
Door
Draw line here
40”
Fig. 7– Final Installation
1. Mark the vertical center line of the exit bar by drawing a line across the door at 40” above the floor.
See fig. 4.
2. Fold the included template, and align the center lines on the template with the center line just drawn on
the door. Then mark the position of the mounting holes for the latch assembly. See fig. 5.
3. Move the template against the door stop and then mark the mounting holes for the strike.
4. Drill the holes as marked on the door and the mullion. See fig. 6.
Note: Diagram shows 6 screws for mounting the chassis. Product only includes 4 screws. For best results, use 6 screws.
ENFORCER Grade 1 Rim-Type Exit Device
SECO-LARM U.S.A., Inc 3 SECO-LARM U.S.A., Inc. 33 3
ENFORCER Grade 1 Rim-Type Exit Device
Specifications:
Construction
ANSI Grade 1 steel
Hand
Non-handed
Latch bolt
Stainless-steel, 3/4” (19mm) throw
Dead latch
Stainless-steel 5/8” (16mm)
Strike
For 5/8” (16mm) stop
Spring
Stainless-steel
Chassis
Plated steel
Cover
Plated zinc cast
Rail assembly
Aluminum
End cap
Plated zinc cast
Dogging
Allen-type dogging standard
Dimensions
33”x8”x23/16” (838x203x56 mm)
Weight
9-lb 12-oz (4.4kg)
WARNING Incorrect mounting that leads to exposure or moisture inside the enclosure could damage the device and will
void the warranty.
PITSW6
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that
such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE
The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM
policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change
specifications without notice.
SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or
in part, without the written permission of SECO-LARM.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999
Website: www.seco-larm.com
E-mail: sales@seco-larm.com
Parts List:
1 x Grade 1 Rim-Type Exit Device
1 x Manual
MiSD-962AR-36G_1312.docx
1 x Mounting template
1 x Strike
1 x Hex wrench
1 x End cap
1 x End cap bracket
4 x 1/4”x3/4” machine screws (oval Philips head, plated steel)
2 x 1/4”x3/4” machine screws (oval Philips head, stainless steel)
2 x #12x3/4” machine screws (oval Philips head, plated steel)
1 x #12x3/4” machine screws (flat Philips head, stainless steel)
2 x M4x6mm machine screws (flat Philips head, stainless steel)
Screws Included:
Mounting chassis to door:
Connecting end cap to end cap bracket:
Mounting end cap bracket to door:
Mounting strike to door:
AVERTISSEMENT Un montage incorrect qui conduit à une exposition à la pluie ou à l’humidité a l’intérieur de l’enceinte
pourrait endommager l’appareil et annuler la garantie.
4 SECO-LARM U.S.A., Inc.
Loading...