SECO
-
LARM
Website:
www.seco
-
larm.com
Email:
sales@seco
-
larm.com
PI_SD-9463-KSVQ_201208.docx
SD-9463-KSVQ
Selectable LED colors (turns from red to green or green to red)
Operating voltage
12~24 VDC
S
tandby
16mA@12VDC / 25mA@24VDC
Triggered
25
mA@12VDC / 32mA@24VDC
Relay type
Form C dry contact, 1
.2A@30
VDC
Response time
10mS
Standby
Red‡
Triggered
Green
Output time
0.8~30 s or toggle
Range
2"~7" (5~18 cm)
IP Rating
IP65†
Temperature range
-4°~131° F (
-
20°~55° C)
Weight
5.6-oz (
160g)
Size 4"x5½"x3"
(102x134x77mm)
The ENFORCER Outdoor Double
-
Gang Wave
-to-
Open
Override button is
prewired
Purple Wire: N.O.
Green Wire: N.C.
Manual override
Sample Installation:
12~24
Outdoor Double-Gang Wave-to-Open
Sensor with Manual Override
English Faceplate*
Sensor with Manual Override is a full-featured exit plate
using IR technology to allow egress from a protected area or
activate a device with a simple wave of a hand. Since no
touch is required, it is suitable for use in hospitals, clinics,
labs, cleanrooms, schools, factories, or offices. The manual
override button allows operation during a power failure
Features:
• Clean and simple no-touch operation reduces the risk of
cross-contamination
• Adjustable sensor range up to 7" (18cm)
• Weatherproof (IP65) for outdoor use†
• 1.2A Relay, adjustable duration 0.8~30 seconds or toggle
• Manual override button functions during a power failure
• LED-illuminated sensor area for easy identification
•
on sensor activation
• Stainless steel plate
VDC
Manual
Override
LED
Indicator
IP65
Weatherproof
Specifications:
Current
drain (max.)
LEDs
*Also available with Spanish or French faceplates by special order
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
‡
†
When properly installed.
button
from the factory
‡
Color for standby/triggered is reversible
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to
All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Copyright © 2020 SECO-LARM U.S.A, Inc. All rights reserved.
ENFORCER Outdoor Wave-to-Open Sensors
SECO
-
LARM
Website:
www.seco
-
larm.com
Email:
sales@seco
-
larm.com
PI_SD-9463-KSVQ_201208.docx
Ordering Information:
2
Outdoor Wave-to-Open Sensors*
Model SD-9163-KSQ SD-9263-KSQ SD-9163-KS1Q SD-9263-KS1Q SD-9163-KS2Q SD-9263-KS2Q
Language
Photo
*Also available with European faceplate in English, Spanish, and French models
Outdoor Wave-to-Open Sensors with Override Button
English Spanish French
Model SD-9463-KSVQ SD-9163-KSVQ SD-9263-KSVQ
Language
English†
Photo
†
Spanish and French faceplates available by special order
Outdoor Wave-to-Open Sensors – Other Models
Model SD-9963-KSGQ
Type Post-Mount Surface-Mount
Photo
SD-9773-KNEVQ
Other Models Also
Available. For our full
line of OEM/private
label infrared
sensors, contact
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to
All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Copyright © 2020 SECO-LARM U.S.A, Inc. All rights reserved.
Loading...