Seco-Larm SD-927PKC-NEQ Specsheet

16842 Millikan Avenue
Irvine, CA 92606

Pi-SD-927PKC-NxQ.docx

1-949-261-2999
1-800-662-0800
1-949-261-7326

Web: www.seco-larm.com

Email: [e-mail]

Copyright © 2010
SECO-LARM U.S.A, Inc.
All rights reserved

Tel:

Fax:

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

SECO-LARM

“No Touch” Request-to-Exit Sensor

Features:

SD-927PKC-NEQ “No Touch / Exit”
SD-927PKC-NSQ “Sin Tocar / Salida”
SD-927PKC-NFQ “Sans Contact / Sortie”

ENFORCER “No Touch” Request-To-Exit Sensors use IR
technology to request egress from a protected area or activate a
device with the simple wave of a hand. Since no touch is required,
this sensor is ideal for use in hospitals, clinics, labs, cleanrooms
(to reduce the risk of contamination), schools, factories, or offices.

Specifications:

Operating voltage

12VDC

Current draw

40mA@12VDC

Relay type

Form “C” NO/NC/COM

Switching capacity

3A@24VDC

Response time

10mS

LEDs

Green to red or red to green

Output time

0.5sec or as long as sensor is triggered

Range

4” (10cm)

Operating temperature

-4°~131° F (-20°~55° C)

Weight

3.0-oz. (85g)

 Range up to 4” (10cm).
 Reliable IR technology senses motion.
 No touch reduces the risk of cross-contamination.
 Stainless steel single gang plate.
 3A relay, triggers min. 0.5 sec. or as long as hand

is near the sensor.

 LED illuminated sensor area for easy identification.
 Programmable LED changes from red to green or

green to red.

 Quick connect screwless terminal block.

SD-927PKC-NEQ

SD-927PKC-NFQ

SD-927PKC-NSQ

41/2”

(115mm)

23/4”

(70mm)

11/8”

(29mm)

21/8”

(55mm)

Dimensions: