Seco-Larm SD-9263-KSQ User Manual
Slimline Plate
Single Gang Plate
European Plate
Language
English
SD-9163-KSQ
SD-9263-KSQ
SD-9363-KSQ
Spanish
SD-9163-KS1Q
SD-9263-KS1Q
n/a
French
English
w/ mechanical override button
SD-9163-KS2Q
SD-9163-KSVQ
w
SD-9263-KS2Q
SD-9263-KSVQ
w
n/a
n/a
w
Featuring:
Built-in Timer (0.5~30 seconds or toggle)
Programmable LED (Red to Green or Green to Red)
Outdoor No Touch
Request-To-Exit Sensor
Manual
The ENFORCER Outdoor No Touch Request-To-Exit Sensor is a full-featured exit plate which
uses IR technology to allow egress from a protected area or activate a device with the simple
wave of a hand. Since it is No Touch, this sensor is ideal for use in hospitals, clinics, labs,
cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
ENFORCER ® No Touch Request-To-Exit Sensor
Adjustable sensor range up to 7" (18cm).
Weather resistant for outdoor use.
Stainless steel plate.
1A relay, adjustable trigger duration 0.5~30
seconds or toggle.
LED illuminated sensor area for easy
identification.
Selectable LED colors (turns from red to
green or green to red) to show sensor
activated.
Power
12~24 VDC
Current
drain (max.)
Standby
16mA@12VDC / 25mA@24VDC
Triggered
25mA@12VDC / 32mA@24VDC
Relay type
Form C dry contact, 1A@30VDC
Response time
10ms
LEDs
Standby
Red2
Triggered
Green2
Output time
0.5~30 s, toggle
Range
2”~7” (5~18 cm)
IP rating
IP653
Temperature range
-4°~131° F (-20°~55° C)
Weight
Single Gang
108g
Single Gang
w/ Mechanical Override
125g
Slimline
61g
Slimline
w/ Mechanical Override
77g
European Plate
77g
11/2”
(39mm)
23/4”
(70mm)
Sensor range adjustment
Trigger time adjustment
LED control jumper
5-pin connector
Form C Mechanical override1
41/2”
(115mm)
1
SD-9163-KSVQ and SD-9263-KSVQ
SD-9263-KSVQ shown
23/4”
(70mm)
41/2”
(115mm)
86mm
86mm
European Plate
Features:
Overview:
Specifications:
2 SECO-LARM
2
Color function reversible
3
Front panel only.
®
U.S.A., Inc
Loading...