Seco-Larm SD-7428-GSEQ Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright 2014 © SECO-LARM U.S.A, Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

Pi_SD-7428-GSEQ_1401.docx

Dimensions:

Request-to-Exit Plate with Delayed Egress Timer

SD-7428-GSEQ

 Programmable nuisance delay timer (0~3 seconds) to

prevent accidental door unlocking

 Adjustable pre-delay timer (1~30 seconds until the

door unlocks)

 12~24 VDC Operation
 Form C relay outputs for lock relay and remote alarm relay
 Built-in 100dB buzzer
 Fits standard double-gang backbox
 Keyswitch to re-energize door lock

Features:

Specifications:

Operating voltage

12~24 VDC

Current
draw

Standby

60mA@12VDC
90mA@24VDC

Release
delay

150mA@12VDC,

55mA@24VDC

Lock
relay
output

10mA@12VDC,

15mA@24VDC

Lock control output

3A@30VDC, Form C,

NO/NC/COM

Remote alarm output

3A@30VDC, Form C,

NO/NC/COM

Buzzer sound level

12VDC: 95db@1m, 24VDC:

100db@1m

41/2” (114mm)

41/2”

(114mm)

13

/16”

(20mm)

115/16”

(50mm)

The ENFORCER® Request-to-Exit Plate with Delayed
Egress Timer allows for a controlled exit from a room
protected by an electromagnetic door lock. After the user
presses the green button and the buzzer sounds, a
programmable pre-exit delay timer begins. The door
unlocks and stays unlocked until the system is
re-energized using the included keys and keyswitch.