Seco-Larm PB-2811-WWQ User Manual
PB-2811-WWQ Wiring Diagram:
PB-2811-WWQ Installation Instructions:
Mini Square Rocker Switch
1. To access the wiring terminals, pry off the front rocker plate from the side using a thin flat tool. Then remove the two
®
PICCN4
MI_PB-xx1x-xxQ_170316a.docx
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800
Email: sales@seco-larm.com
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to
change specifications without notice. SECO
LARM
U.S.A., Inc. or their respective owners. Copyright © 2017 SECO
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for one (1)
year
2. For concealed wiring, turn the back plate over and punch out one or more holes in the thinned out areas.
3.
4.
5.
6.
Concealed wiring:
Exposed wiring:
Manual
screws and detach the housing from the back plate.
For exposed wiring, cut out one of the thinned out slots in the cover.
After method of wiring is chosen, thread the wires through the slots and install the wires to the switch terminal
according to the wiring diagram.
Attach the back plate to the wall.
Replace the housing cover and the front rocker plate.
from the date of sale to the original customer.
-LARM is also not responsible for misprints. All trademarks are the property of SECO-
-LARM U.S.A., Inc. All rights reserved.
ENFORCER Mini Square Rocker Switch
Overview:
PB-2618-GQ
PB-2318-SQ
PB-5115-GQ
PB-5348-SQ
PB-5118-GQ
PB-5318-SQ
PB-5811-WWQ
PB-1311-WWQ
PB-2811-WWQ
PB-1811-WWQ
• Green metal mushroom
button
• Surface-mount with
backbox
• N.O. Contact rated
3A@36VDC
1
• 2
/16"x21/16"x13/8"
(53x53x35 mm)
• Vandal-resistant metal
button
• Flush-mount with backbox
• NO/NC Contact rated
1A@24VDC
1
/16"x21/16"x19/16"
• 2
(53x53x39 mm)
• Pushbutton component is
UL Recognized
• Green metal mushroom
button
• Flush-mount mini RTE
plate
• N.O. Contact rated
3A@36VDC
9
• 3
/16"x11/8"x11/4"
• Illuminated metal button
• Flush-mount with
backbox
• NO/NC Contact rated
1A@24VDC
3
/16"x11/4"x115/16"
• 3
(81x32x50 mm)
(91x28x32 mm)
• Green metal mushroom
• Flush-mount with
• N.O. Contact rated
• 3
button
backbox
3A@36VDC
3
/16"x11/4"x11/4"
(81x32x32 mm)
• Vandal-resistant metal
button
• Flush-mount with backbox
• NO/NC Contact rated
1A@24VDC
7
• 3
/16"x15/16"x19/16"
(88x34x39 mm)
• Pushbutton component is
UL Recognized
• Slim-line rocker switch
• Surface-mount with
backbox
• NO/NC Contact rated
3A@36VDC
3
/8"x111/16"x7/8"
• 3
(86x43x23 mm)
• Large square rocker
switch
• Flush-mount
• NO/NC Contact rated
1A@24VDC
3
/8"x33/8"x17/16"
• 3
(86x86x36 mm)
• UL Recognized
• Mini square rocker
• Surface-mount with
• NO/NC Contact rated
• 2
microswitch
switch
backbox
3A@36VDC
11
/16"x211/16"x13/8"
(69x69x35 mm)
• Large square rocker
switch
• Surface-mount with
backbox
• NO/NC Contact rated
3A@36VDC
7
/16"x37/16"x15/16"
• 3
(88x88x33 mm)
2 SECO-LARM U.S.A., Inc.
Loading...