Seco-Larm NR-P101E-TQ, NR-P401E-TQ Specsheet

SECO

-

LARM

Website:

www.seco

-

larm.com

Email:

sales@seco

-

larm.com

PI_NR-Px01E-TQ_200616.docx

Model

NR-

P101E-TQ NR-P401E-TQ

PoE In 1x Weather

-

resistant RJ

-45

1x Shielded RJ

-

45

PoE Out

1x Weather

-

resistant RJ

-45

4x Shielded RJ

-

45

Input Up to 30W

Up to 60W

Output Up to 25W

Up to 55W (total for 4 ports)

1 Extender

656ft (200m)

656ft (200m)

2 Extenders

984ft (300m)

984ft (300m)

Data link

Both pin 1/2, 3/6 and 4/5, 7/8

Pin 1/2(+), 3/6(

–)

Ethernet speed

10/100/1000 Mbps half/full duplex

IEEE 802.3af,

Power link

Yellow

Data link

Green, steady

Data Transmit

Green flashing

Operating humidity

90% (maximum, non

-

condensing)

Operating temperature

-13°~101° F (

-

25°~55° C)

14°~113° F (

-

10°~45° C)

71/4"x13/4"x13/4"

411/16"x11/8"x33/8"

Weight

8-

oz (227g)

8.8-oz (250g)

NR-P101E

-TQ

Automatically detects PoE equipment and protects

PoE source

PoE Extender

PoE Cameras or

Cat5e/6 cable up

Cat5e/6 cable up

Gigabit PoE Extenders

1-Input to 1-Output, Weather-Resistant

NR-P401E-TQ 1-Input to 4-Output

The ENFORCER Gigabit PoE Extenders connects PoE
cameras, IP access control, IP speakers/intercoms,
IP telephony, or other PoE devices using a single Cat5e or
Cat6 cable to extend data and power by an additional 328ft
(100m), for a total range of up to 984ft (300m) with two
extenders. The NR-P401E-TQ supports up to 4 PoE devices.

Features:

• Extends the range of PoE Ethernet devices over

Cat5e or higher cables an additional 328ft (100m)

• Connects 10,100,1000BaseT PoE devices

including IP cameras, IP access control, VOIP,
IP speakers/intercoms, etc.

• Supports up to gigabit transmission rates

• Passive operation – no external power required

• Easy plug-and-play installation

• Compliant with IEEE802.3af, IEEE802.3at

•

from damage due to faulty installation

NR-P401E-TQ only:

• 4 Output ports for up to 4 PoE devices

• Also compliant with IEEE802.3bt 4 pairs

Sample CCTV Application:

NR-P101E-TQ

NR-P401E-TQ

Specifications:

Connections

PoE Power

Transmission
range*

Power link

Network cables

Pin 1/2(+), 3/6(–)

up to 25W

Weather-resistant Cat-5e or

higher

up to 12W for 4 PSE, 25W for

2 PSE

Shielded Cat-5e or higher

other PoE devices

(NR-401E-TQ shown)

to 328ft (100m)

®

to 328ft (100m)

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606
Phone: [phone] | [phone] Fax: [phone]

PoE standard

LED
Indicators

IP rating

Dimensions

*The maximum range depends on the actual operating conditions, PoE device power requirements, and the type

of PoE device. Cat5e/6 Ethernet cables are recommended.

†

The NR-P401E-TQ can be used outdoors with an IP66 sealed box and weather-resistant UTP cables

‡

Including endcaps

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to

All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.

change prices and specifications without notice. SECO-LARM is not responsible for misprints.

IEEE 802.3at

None

IP66 (with weather-resistant

UTP cable)

(185x45x45 mm)‡

Copyright © 2020 SECO-LARM U.S.A, Inc. All rights reserved.

IEEE 802.3af, IEEE 802.3at,

IEEE 802.3bt 4 pairs (60W)

None†

(119x28x85 mm)