Seco-Larm NR-P101FQ Specsheet
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2014 © SECO-LARM U.S.A., Inc. All rights reserved.
All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: sales@seco-larm.com
PiNR-P101FQ_141015.docx
PoE Repeater
NR-P101FQ
Features:
Extends power and data beyond the normal limit of
328ft (100m)
Compliant with standard PoE IEEE 802.3af
Installs on Cat5e/6 4-pair UTP cable with RJ45 jacks
Supports 10/100/1000 BASE-T transmission rates
Passive operation – no external power required
Easy plug-and-play installation
Auto-sensing for detecting PoE or non-PoE devices
Built-in LED status indicators
Sealed and fanless for increased reliability
Compact, wall-mountable for convenience
The ENFORCER NR-P101FQ PoE Repeater extends power
and data an additional 394ft (120m) for a maximum range of up to
1,116ft (340m) when using two PoE Repeaters, thus eliminating
the need for additional switches, hubs, and expensive fiber optic
installations. The NR-P101FQ is compliant with standard PoE
IEEE 802.3af. The NR-P101FQ is simple to install with no external
power source required, and no set up configuration needed.
Specifications:
Model
NR-P101FQ
Connector
In
RJ45
Out
RJ45
Power
consumption
Standby
1.1W (23mA)
@10Mbps
1.44W (30mA)
@100/1000 Mbps
1.92W (40mA)
Transmission
range
Single repeater
Up to 722ft (220m)*
Two repeaters
Up to 1,116ft (340m)*
Max device power range with PoE
switch
1st PoE
Repeater
2nd PoE
Repeater
8.58W@722ft
(220m)
4.21W@1,161ft
(340m)
PoE
IEEE 802.3af Standard, 48V, 12.95W
Data link
Pin 1/2, 3/6, 4/5, 7/8
Power link
Pin 1/2 (+), 3/6 (-) end-span
Material
Aluminum
Operating temperature
32°~131° F (0°~55° C)
Dimensions
25/8”x45/16”x11/16” (67x110x27 mm)
Weight
6.4-oz (180g)
Sample Application:
LED Function:
LED
Indicators
Power (Green)
On
PSE send power
Off
PSE no-power
Data Port
(Yellow/Green)
Yellow ON
1000 Mbps link
Yellow
FLASHING
1000 Mbps Activity
Green ON
10/100 Mbps link
Green FLASHING
10/100 Mbps Activity
Off
No Link
PoE Switch
Cat5e/6 cable
328’ (100m)
PoE Repeater
IP Camera
(Or other
PoE device)
Cat5e/6 cable
394’ (120m)
Loading...