Seco-Larm NR-P101FQ User Manual
NR-P101FQ
PoE Repeater
Manual
Extends power and data beyond the normal limit of 328ft (100m)
Compliant with standard PoE IEEE 802.3af
Installs on Cat5e/6 4-pair UTP cable with RJ45 jacks
Supports 10/100/1000 BASE-T transmission rates
Passive operation – no external power required
Easy plug-and-play installation
Auto-sensing for detecting PoE or non-PoE devices
Built-in LED status indicators
Sealed and fanless for increased reliability
Compact, wall-mountable for convenience
ENFORCER PoE Repeater
Connector
In
RJ45
Out
RJ45
Power consumption
Standby
1.1W (23mA)
@10Mbps
1.44W (30mA)
@100/1000 Mbps
1.92W (40mA)
Transmission Range
Single repeater
Up to 787ft (240m)*
Two repeaters
Up to 1,181ft (360m)*
Max Device Power Range with PoE switch
1st PoE Repeater
2nd PoE Repeater
8.58W at 787ft (240m)*
4.21W at 1,181ft (360m)*
PoE
IEEE 802.3af Standard, 48V, 12.95W
Data Link
Pin 1/2，3/6，4/5，7/8
Power Link
Pin 1/2 (+)，3/6 (-) End-Span
Material
Aluminum
Operating temperature
32°~131° F (0°~55° C)
Dimensions
25/8” x 45/16” x 11/16” (67 x 110 x 27 mm)
Weight
6.4 oz. (180g)
Specifications:
The ENFORCER NR-P101FQ PoE Repeater extends power and data an additional 394ft (120m)
for a maximum range of up to 1,181ft (360m) when using two PoE Repeaters, thus eliminating
the need for additional switches, hubs, and expensive fiber optic installations. The NR-P101FQ is
compliant with standard PoE IEEE 802.3af. The NR-P101FQ is simple to install with no external
power source required, and no set up configuration needed.
Parts List:
Introduction .................................................. 2
Overview ...................................................... 3
Parts List ...................................................... 2
Installation .................................................... 3
Specifications ............................................... 2
Troubleshooting............................................ 4
LED Function ............................................... 2
Also Available from SECO-LARM ................ 4
Introduction:
1x
PoE Repeater
1x
Manual
4x
Screws
4x
Plastic Wall Anchors
LED Indicators
Power (Green)
On
PSE send power
Off
PSE no-power
Data Port
(Yellow/Green)
Yellow ON
1000 Mbps link
Yellow FLASHING
1000 Mbps Activity
Green ON
10/100 Mbps link
Green FLASHING
10/100 Mbps Activity
Off
No Link
LED Function:
*The maximum distances are typical for installations using 24AWG CAT5 cable or better. Actual limits depend on cable quality and POE device characteristics.
Contents:
2 SECO-LARM U.S.A., Inc.
Loading...