Manual
VGA over Cat5e/6
NOTE: Products with model numbers that end with “Q” or products that have a round green “Q” sticker signify RoHS compliance.
MVE-SV010Q
Passive operation—no external power required
Uses inexpensive Cat5e/6 cable (UTP/STP)*
Extends VGA cable range up to 197ft (60m) at 1280x1024 resolution
*Unit works with unshielded twisted pair (UTP) and shielded twisted pair (STP). For best results in areas with high interference, use STP.
ENFORCER Passive VGA Balun
SECO-LARM U.S.A., Inc.
The ENFORCER Passive VGA Baluns extend VGA video signals up to 443ft (135m) using low-cost Cat5e/6 cable.
These units make it possible for CCTV video sources such as DVRs and computers to be secured in one room
while running VGA signals to a monitor or projector in another room.
Specifications:
Dimensions:
Introduction:
VGA connectors
Female, 15-pin
Number of inputs
1
Number of outputs
1
Range
640x480 pixels (15MHz)
443ft (135m)
800x600 pixels (30MHz)
344ft (105m)
1024x768 pixels (60MHz)
246ft (75m)
1280x1024 pixels (100MHz)
197ft (60m)
Operating temperature
32°~131° F (0°~55° C)
Operating humidity
Up to 95%
Storage temperature
-4°~185° F (-20°~85° C)
Dimensions
21/2” x 25/8” x 1” (64x67x27 mm)
Weight
10-oz (284g)
T568-B Wiring Specification:
Pair #
Wire
Pin #
Configuration
1
Blue
4
G Video (+)
Blue/White
5
G Video (-)
2
Orange/White
1
R Video (+)
Orange
2
R Video (-)
3
Green/White
3
Horizontal sync
Green
6
Vertical sync
4
Brown/White
7
B Video (+)
Brown
8
B Video (-)
Mounting Plate Installation:
1 x Transmitter 2 x Mounting Plate
1 x Receiver 8 x Plate Screws
1 x Manual 8 x Mounting Screws
Parts List:
21/2”
(64mm)
25/
” (67mm)
1”
(27mm)
Mounting Plate
Plate
Screws
Mounting Screws