Seco-Larm MVE-AT11-01NQ, MVE-AH030Q Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright 2014 © SECO-LARM U.S.A, Inc. All rights reserved.

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the

right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PiMVE-AH030Q_1406_c.docx

HDMI® Extender

over Dual Cat5e/6

Extender for

HDMI® over Single Cat5e/6

4x4 HDMI® Matrix

4x1 HDMI® Switch

1x4 HDMI® Splitter

MVE-AH010Q

MVE-AT11-01NQ

MVM-AH44-01YQ

MVS-AH41-01NQ

MVD-AH14-01NQ

HDMI® Extender over Single Cat5e/6

MVE-AH030Q

Range: 196ft (60m) at 1080p Resolution

Features:

 Status LEDs – Indicate power and HDMI connection complete
 Signal Strength – Active operation ensures that the signal

will remain strong over the length of the cable

 Distance – Capable of providing a clear HDMI signal up to

196ft (60m)

 Formats Supported – Supports both progressive and

interlaced formats: 1080p/1080i/720p/576p/576i/480p/480i

 Plug and Play – Comes as a complete set consisting of a

transmitter and receiver, power supplies, and IR extenders

 Zero Signal Loss – Integrated circuits in the transmitter

and receiver clean, buffer, and amplify the HDMI signal to
prevent signal loss and ensure a clear signal regardless of
the length of the cable

 Bi-directional IR – Send IR signals from the source to the

monitor or from the monitor to the source for discrete
operation of devices

 EDID Management – Eliminate sync issues by choosing

from 9 different internal EDID settings, the HDMI loop
display, or the main HDMI display

 Digital Audio Out – Send HDMI audio directly to an

external sound bar or A/V Receiver

 ARC Option Switch – Enable Audio Return Channel (ARC)

to automatically switch the audio source to that shown by
the display device

 HDMI Loop Output – Secondary HDMI output for local

displays

Specifications:

Also Available from SECO-LARM®:

Input video signal

3.3V

Input DDC signal

5Vp-p (TTL)

Maximum single link range

1080p

Deep color

24bit

Video format supported

High-speed HDMI, HDCP 1.2

Audio formats supported

LPCM, Dolby-AC3, DTS7.1, DSD

Range – 1080p

Cat6

Up to 196’ (60m)

Cat5e

Up to 98’ (30m)

Video amplifier bandwidth

1.65Gbps

Power supply

1A@5VDC (2 adapters) (2.1mm plug)

ESD protection
(human body model)

+8kV (air-gap discharge),
+4kV (contact discharge)

Current draw

Transmitter

550mA@5VDC

Receiver

450mA@5VDC

Operating temperature

32°~104° F (0°~40° C)

Operating humidity

20~90 % RH (no condensation)

Dimensions

315/16”x29/16”x1" (100x65x26 mm)

Weight

7.2-oz (205g) (each)