Seco-Larm MVE-AH1H1-02ZQ Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright 2016 © SECO-LARM U.S.A., Inc. All rights reserved.

All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PI_MVE-AH1H1-0xxQ_160224.docx

ENHANCE HDMI Extenders over Cat5e/6

MVE-AH1H1-01GQ Extend HDMI signals up to 230ft (70m) at 1080p
MVE-AH1H1-02ZQ Extend HDMI signals up to 330ft (100m) at 1080p

Features:

 Signal Strength – Active operation ensures that the signal

strength will remain strong over the length of the cable

 Distance – The Enhanced HDMI Extender over Cat5e/6 can

transmit a clear HDMI signal up to 230ft (70m) for the
MVE-AH1H1-01GQ and 330ft (100m) for the MVE-AH1H1-02ZQ

 Formats Supported – The Enhanced HDMI Extender over

Cat5e/6 supports both progressive and interlaced formats:
4K/1080p/1080i/720p/576p/576i/480p/480i

 Plug and Play – The Enhanced HDMI Extender over Cat5e/6

comes as a complete set consisting of a transmitter, receiver,
power supply, and IR adapters

 Zero Signal Loss – Integrated circuits in the transmitter and

receiver clean, buffer, and amplify the HDMI signal.

 Bi-Directional IR – Send IR signals from the source to the monitor

or from the monitor to the source for discrete operation of devices

 Connect Multiple Units – Repeat up to four sets to extend HDMI

range up to 918ft (280m) for the MVE-AH1H1-01GQ and 1300ft
(400m) for the MVE-AH1H1-02ZQ

MVE-AH1H1-02ZQ Only:

 Bi-Directional RS-232 – Send RS-232 commands from a control

system to the display and back without extra cabling

 Ethernet pass-through – 100BaseT Ethernet pass-through to

connect remote displays to local networks

*Distance quoted is for the MVE-AH1H1-02ZQ

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.

The ENFORCER Enhanced HDMI Extenders over Cat5e/6 extend
the range of HDMI signals to send video and audio up to 330ft
(100m)* over a single Cat5e/6 cable. The extender includes an IR
transmitter and receiver, allowing the user to use a remote control
at one end of an installation to control a device at the opposite end.
A single power supply can power both devices from either end of
the installation. The MVE-AH1H1-02ZQ also supports 100BaseT
Ethernet Pass-through and Bi-directional RS-232 control.

MVE-AH1H1-01GQ

MVE-AH1H1-02ZQ

Specifications:

Model

MVE-AH1H1-01GQ

MVE-AH1H1-02ZQ

Input video signal

3.3V

Input DDC signal

5Vp-p (TTL)

Maximum single link range

4Kx2K@30Hz

Deep color

48-bit

Video formats supported

High-speed HDMI with 3D, HDCP 1.2

Audio formats supported

LPCM, Dolby-AC3, DTS 7.1, DSD

Output video

HDMI

Resolutions supported

4K/1080p/1080i/720p/576p/576i/480p/480i

Range – 1080p
Cat6

Up to 230’ (70m)

Up to 330’ (100m)

Cat5e

Up to 196' (60m)

Up to 295’ (90m)

Range – 4K
Cat6

Up to 130’ (40m)

Up to 230’ (70m)

Cat5e

Up to 98' (30m)

Up to 196’ (60m)

Video amplifier bandwidth

10.2Gbps

Video input connector

HDMI Type A 19-pin female

Maximum input cable
length

24AWG: 50' (15m); 26AWG: 32' (10m);

28AWG: 16' (5m)

Cat5e/6 wiring standard

T568-B

IR pass-through

30~50kHz

RS-232 Pass-through

N/A

115,200 baud

Ethernet pass-through

N/A

100BaseT

Operating voltage

24VDC

Power supply

1A@24VDC (1 adapter) (2.1mm plug)

ESD protection
(human body model)

±8kV (air-gap discharge),
±4kV (contact discharge)

Current
draw

Transmitter

150mA@24VDC

Receiver

250mA@24VDC

Operating temperature

32°~104° F (0°~40° C)

Operating humidity

20~90% RH (no condensation)

Dimensions

315/16”x29/16”x1”

(100x65x25mm)

315/16”x315/16”x11/8”

(100x100x28mm)

Weight

7.1-oz (200g) (each)

11.3-oz (300g) (each)

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright 2016 © SECO-LARM U.S.A., Inc. All rights reserved.

All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PI_MVE-AH1H1-0xxQ_160224.docx

Dimensions:

Sample Application:

Cable Legend:

HDMI

Cat5e/6

Power

IR

* Power supply can be installed at either end

Standard installation of MVE-AH1H-01GQ

4K HDMI Splitters

IR over HDMI Kit
High-Speed HDMI Cables

MVD-AH12-01Q
MVD-AH14-01Q
MVD-AH18-01Q

MVE-PN11-01Q

MC-1102 Series
9 Sizes available:

1.5ft~50ft

Also Available from SECO-LARM:

HDMI over Composite

MVA-HT01Q

HDMI over Dual CAT5e/6

MVE-AH010Q

HDMI Switchers

MVS-AH31-01NQ
MVS-AH51-01NQ

HDMI Extender over Coax Cable

MVE-AA11-01NQ

HDMI Extenders over Single CAT5e/6

MVE-AH030AQ
MVE-AH030Q

1"

(25mm)

MVE-AH1H1-01GQ*

29/16"

(65mm)

315/16"

(100mm)

MVE-AH1H1-02ZQ*

11/8"

(28mm)

315/16"

(100mm)

315/16"

(100mm)

Receiver

HDMI Source

IR Rx

Display

IR Tx

Up to 230' (70m)

Receiver

HDMI Extender over Cat5e/6

24VDC*

Power supply

Remote

control

24VDC*

Power supply

Transmitter

Transmitter

HDMI Extender over Cat5e/6

Transmitters shown.
Dimensions are the same for both the transmitter and receiver