Seco-Larm MVE-AH010Q User Manual
Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.
MVE-AH010Q
Extender for HDMI Over Dual Cat5e/6
Manual
Extend HDMI over two Cat5e/6 cables
Supports resolutions from 480i to 1080p with zero signal loss
Transmits up to 197ft (60m) at 1080p over two Cat6 cables
Plug and play operation – comes as a complete set
ENFORCER Extender for HDMI over Dual Cat5e/6
Introduction:
The ENFORCER HDMI Extender over Cat5e/6 extends the range of HDMI by using a
transmitter and an active receiver to send video and audio over two Cat5e/6 cables.
HDMI Formats as high as 1080p can be transmitted up to 197ft (60m) between the two
units with zero signal loss.
Features:
Signal Strength –Transmitter ensures that the signal strength will remain strong over
the length of the cable.
Distance – The HDMI Extender over Cat5e/6 is capable of providing a clear HDMI
signal up to 197ft (60m).
Formats Supported – The HDMI Extender over Cat5e/6 supports both progressive and
interlaced formats: 1080p/1080i/720p/576p/576i/480p/480i.
Plug and Play – The HDMI Extender over Cat5e/6 comes as a complete set consisting
of a transmitter, receiver, and power supply. No adjustments or settings must be made,
the unit is ready to use right out of the box.
Zero Signal Loss – Integrated circuits in the transmitter and receiver clean, buffer and
amplify the HDMI signal to prevent signal loss and ensure a clear signal regardless of
the length of the cable.
Specifications:
Parts List:
1 x Transmitter (MVE-AH010Q-TQ)
1 x Receiver (MVE-AH010Q-RQ)
1 x 5VDC Power adapter
1 x Manual
Input video signal
0.5~1.0 Vp-p
Input DDC signal
5Vp-p (TTL)
Maximum single link range
1080p
Video formats supported
High-speed HDMI, HDCP 1.2
Audio formats supported
Dolby TrueHD, DTS-HD Master Audio
Output video
HDMI
Resolutions supported
1080p/1080i/720p/576p/576/i/480p/480i
Range – 1080p
Cat6: 197’ (60m); Cat5e: 98’ (30m)
Video amplifier bandwidth
6.75Gbps
Cat5e/6 Wiring standard
T568-B
Operating voltage
5VDC
Power supply
5VDC@1A (2.1mm plug)
Current draw
Transmitter
N/A
Receiver
400mA@5VDC
Operating temperature
23°~95° F (-5°~35° C)
Operating humidity
5~90% RH (no condensation)
Dimensions
33/16”x13/4”x7/8” (81x45x22mm)
Weight
8.7-oz (246g)
2 SECO-LARM U.S.A., Inc.
Loading...