Seco-Larm MVD-AH18-01Q, MVD-AH14-01Q, MVD-AH12-01Q User Manual

ENFORCER

®

4K HDMI

®

Splitters

Manual

 Transmit an HDMI source to up to eight

different HDMI displays

 Supports up to 4K resolution and 3D video

 Individual status LEDs for each HDMI output
 EDID Management settings
 One (1) 5VDC Power supply included

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.

MVD-AH12-01Q

4K 1x2 HDMI Splitter

MVD-AH14-01Q

4K 1x4 HDMI Splitter

MVD-AH18-01Q

4K 1x8 HDMI Splitter

4K

3D

Support

Video

MVD-AH14-01Q shown

ENFORCER 4K HDMI Splitters

The ENFORCER 4K HDMI Splitters allow for one HDMI source to simultaneously transmit to up to eight
different monitors. The splitters work with most HDMI devices, delivering the very best in digital audio and
video signals with HD resolutions of up to 4K. LED Indicators clearly display power status as well as which
outputs are active. The 4K HDMI Splitters can be daisy chained up to four levels for even more outputs.

Specifications:

Introduction:

Model

MVD-AH12-01Q

MVD-AH14-01Q

MVD-AH18-01Q

Type

4K HDMI Splitter

Input video signal

3.3V

Input DDC signal

5Vp-p (TTL)

Maximum single link range

4K*2K@30hz

Deep color

48bit

Video formats supported

High-speed HDMI, HDCP 1.4

Audio formats supported

LPCM, Dolby-AC3, DTS7.1, DSD

Output video

HDMI

Resolutions supported

4K/1080p/1080i/720p/576p/576i/480p/480i

Video amplifier bandwidth

10.2Gbps

Video input connector

1x HDMI Type A 19-pin female

Max. input cable length

24AWG: 50’ (15m); 26AWG: 30’ (10m); 28AWG: 16’ (5m)

Video output connector

2x HDMI Type A 19-pin female

4x HDMI Type A 19-pin female

8x HDMI Type A 19-pin female

Max. output cable length

24AWG: 50’ (15m); 26AWG: 32’ (10m); 28AWG: 16’ (5m)

Operating voltage

5VDC

Power supply

1A@5VDC (2.1mm plug)

2A@5VDC (2.1mm plug)

ESD protection

±8kV (air-gap discharge), ±4kV (contact discharge)

Current draw

650mA@5VDC

1820mA@5VDC

Operating temperature

32°~104° F (0°~40° C)

Operating humidity

20~90% RH (no condensation)

Dimensions

23/8”x23/4”x

13/

16

” (60x70x20 mm)

23/4”x513/16”x1” (70x147x25 mm)

47/16”x103/16”x11/4” (112x258x32 mm)

Weight

4.4-oz (125g)

10.5-oz (300g)

25.4-oz (720g)

EDID Management Settings:

Parts List:

1x 4K HDMI Splitter 1x 5VDC Power supply 1x Manual

Position

EDID Description

0 0 0 0

Copy EDID from HDMI OUT1

0 0 0 1

1080p, 2CH AUDIO

0 0 1 0

1080p, DOLBY/DTS 5.1

0 0 1 1

1080p, HD AUDIO

0 1 0 0

1080i, 2CH AUDIO

0 1 0 1

1080i, DOLBY/DTS 5.1

0 1 1 0

1080i, HD AUDIO

0 1 1 1

3D, 1080p, 2CH AUDIO

1 0 0 0

3D, 1080p, DOLBY/DTS 5.1

1 0 0 1

3D, 1080p, HD AUDIO

1 0 1 0

4Kx2K, 2CH AUDIO

1 0 1 1

4Kx2K, DOLBY/DTS 5.1

1 1 0 0

4Kx2K, HD AUDIO

1 1 0 1

1080p, 2CH AUDIO

1 1 1 0

1080p, 2CH AUDIO

1 1 1 1

Auto Compare HDMI OUT EDID

MVD-AH12-01Q:

- Copy: Copy Output 2's EDID to the Input port

- Auto: Compare the EDID for Outputs 1 and 2
MVD-AH14-01Q and MVD-AH18-01Q:

2 SECO-LARM U.S.A., Inc.