
• Converts HDMI to composite video + stereo audio
HDMI-to-Composite Converter
• Supports input resolutions up to 1920x1080
• Supports NTSC or PAL output
• Stereo analog audio output
• Plug and play operation
Up to
1920x1080
Resolution

ENFORCER HDMI-to-Composite Converter
The MVA-HT01Q HDMI-to-Composite Converter allows the user to view video from HDMI
devices on
conversion of formats as lar
stereo output
Supported input resolutions
1080p/1080i/720p/576p/576i/480p/480i
Video amplifier bandwidth
High-speed HDMI, HDCP 1.2
HDMI Type A 19-pin female
ESD protection (Human body model)
±8 kV (air-gap discharge), ±4 kV (contact discharge)
20~90% RH (no condensation)
23/8”x21/8”x13/16” (66x54x20mm)
1x HDMI-to-Composite Converter
analog TVs or projectors without HDMI inputs. Active operation allows the
ge as 1920x1080. The MVA-HT01Q also has a L/R analog
allowing the conversion of audio as well.
2 SECO-LARM U.S.A., Inc.

ENFORCER HDMI-to-Composite Converter
1. Decide where the converter will be installed.
2.
HDMI-to-Composit e ConverterHDMI-to-Composit e Converter
Connect the HDMI cable from the HDMI device to the input of the converter.
Connect the composite RCA cable from the monitor to the analog output of the converter.
Connect the speakers’ stereo audio cables to the audio output of the converter.
Using the included USB cable, connect power from a powered USB port on the HDMI device.
Switch on the analog monitor and HDMI device and verify that the system is functioning
properly.
SECO-LARM U.S.A., Inc. 3

ENFORCER HDMI-to-Composite Converter
• Make sure the converter is powered.
convert composite video to HDMI.
Also Available from SECO-LARM:
LARM reserves the right to
chang
Trademarks
are the property of SECO
Copyright © 2016
al may not be reproduced or copied, in whole or
in part, without the written permission of SECO-LARM.
used in normal
service for
s limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO
This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO
equipment is
not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO
LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800
Email: sales@seco-larm.com
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and ot
• Make sure the input and output devices are
powered.
HDMI device does not function correctly.
• Test the cables separately to make sure they
are functioning.
• Make sure that you are trying to convert HDMI
to composite video. The MVA-HT010Q does not
HDMI Extender over Dual
MVS-AH51-01NQ
4K HDMI Switchers
This SECO-LARM product is warranted against defects in material and workmanship while
one (1) year from the date of sale to the original customer. SECO-LARM’s obligation i
-
LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO In no event shall SECO-
The information and specifications printed in this manual are current at the time of publication.
-LARM policy is one of continual development and improvement. For this reason, SECO-
e specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
4 SECO-LARM U.S.A., Inc.
SECO-LARM U.S.A., Inc. All rights reserved. This materi
her countries.
-LARM USA Inc. or their respective owners.
HDMI Extender over Single
MVD-AH14-01Q
MVD-AH18-01Q
HDMI Cables
Basic HDMI Extender over
Single Cat5e/6
-LARM.
-LARM determines that such
MI_MVA-HT01Q_160208.docx
PICHN3