Seco-Larm MIR-K16S-2101Q Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright © 2018 SECO-LARM U.S.A, Inc. All rights reserved.

All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to

change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PI_MIR-K16S-2101Q_180725.docx

IR Distribution Kit with 6 Ports

MIR-K16S-2101Q

The ENFORCER IR Distribution Kit extends the IR signal
from your remote control to remotely operate audio/visual
equipment kept in a separate location or in a closed cabinet.
The IR Distribution Kit allows for the transmission of IR
signals from one IR receiver to up to twelve IR emitters. The
wide band IR receiver is capable of receiving IR signals from
many types of remotes.

 Compatible with 38kHz and 56kHz IR systems
 Six

1

/8" (3.5mm) IR emitter output jacks

 Kit includes two single IR emitters
 10ft (3m) Cable for IR emitters and receiver
 12VDC Power jack (AC adapter included)
 Extra Single (MIR-E-101Q) and Dual (MIR-E-201Q) Emitters

also available

 IR Receiver Adapter can be added to extend signals without

complicated wiring (MIR-AS-01Q)

Features:

Specifications:

Operating voltage

12VDC

Zone 1 Emitter ports

6

LEDs

Power (red), Status (green), Receiver (blue)

IR Receiver frequency

30~60 kHz

IR Receiver
distance

38kHz

40' (12.2m)

56kHz

25' (7.6m)

IR Emitter frequency

38/56 kHz

Connector
type

Power/status

2.1mm Coaxial center-pin-positive

IR Receiver

1

/8" (3.5mm) TRS Mini-plug /

4-pin terminal block

IR Emitter 1/8" (3.5mm) Mono mini-plug

Maximum extended range

984' (300m)*

Operating humidity

10~90%

Operating temperature

32°~158° F (0°~70° C)

Power supply

12VDC/200mA

Dimensions
Connection

block

27/16"x115/16"x1" (62x49x25 mm)

IR Receiver

13/4"x9/16"x1/2" (45x15x12 mm)

IR Emitter 5/8"x3/8"x1/4" (16x10x6 mm)

*With IR Receiver Adapter MIR-AS-01Q (not included)

Sample Application:

Infrared Connection Block

1 2 3 4 5 6

Emitters

IRR eceiver

Power

12VDC
Ground
Status
Signal

Status

Dual IR
Emitter

(not included)

IR Connection

Block

Remote

Various

devices to be

controlled

IR Receiver

12VDC Power

adapter

Closed

Cabinet

Basic Installation (Not to Scale)

Single IR

Emitter

(2 included)

12

VDC

10ft

(3m) Cable

2

Single IR

Emitters

38/56

kHz

Compatible