![](/html/fc/fc49/fc49090a7bf6b825158a22530a13bd247d985ac2b19125c7a322cc0e6c48c583/bg1.png)
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2014 © SECO-LARM U.S.A, Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: sales@seco-larm.com
Features:
Helps prevent damage to sensitive computer or CCTV
equipment such as cameras, monitors, digital video
recorders, video splitters, PCs, servers or networking hubs
Intercepts repeated surges and spikes that could damage
network equipment
Installs on Cat5e/6 4-pair UTP cable with RJ45 jacks
Passive operation – no external power required
Includes a grounding post
The ENFORCER IPV-PD88Q is a passive device that helps
protect sensitive networking equipment from power surges.
The device can be used in new or existing installations.
The IP Surge Protector should be installed between devices
connected by Cat5e/6 4-pair UTP cable to protect against
surges that could damage computer or video equipment.
Also Available from SECO-LARM®:
VS-1V22AQ
HD-SDI Surge Protector
IPV-P188Q
PoE Surge Protector
VS-1V12BQ
Video Surge Protector
Shortest
possible
Cat5e/6 cable
IP Switch
(Not Protected)
Signal passing
capability
37/16”x25/8”x11/16” (87x67x27 mm)