16842 Millikan Avenue, Irvine, CA 92606
Copyright 2014 © SECO-LARM U.S.A, Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: sales@seco-larm.com
Power over Ethernet (PoE) Surge Protector
Features:
Helps prevent damage to sensitive networking equipment
Intercepts repeated surges and spikes that could damage
network equipment
Installs on a Cat5e/6 4-pair UTP cable with RJ45 jacks
Power and signal line protection
10/100 Base-T Cat5/5e compatible
Support mid-span PoE and end-span PoE
Complies with 802.3af and 802.3at for PoE
Includes a 16” grounding wire for convenient
connection to ground
The ENFORCER PoE Surge Protector is a passive device that
helps protect sensitive networking equipment from power surges.
The device can be used in new or existing installations.
The IPV-P188Q should be installed between the PoE hub and a
networked device to protect against surges that could damage the
equipment.
Also Available from SECO-LARM®:
IPV-PD88Q
IP Surge Protector
VS-1V22AQ
HD-SDI Surge Protector
VS-1V12BQ
Video Surge Protector
Shortest
possible
Cat5e/6 cable
IP Switch
(Not Protected)
Signal passing
capability