Seco-Larm IPB-A1200Q, IPB-A1100Q User Manual

Manual

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.

IP / Ethernet Extenders

IPB-A1100Q*

Active IP Balun over Cat5e/6

IPB-A1200Q*

Active IP Balun over Coaxial

IPB-A1100Q

IPB-A1200Q

*Each set includes one transmitter and one receiver.

Front view

Front view

Rear view

Rear view

ENFORCER IP / Ethernet Extenders

ENFORCER Active IP Baluns are designed to extend the range of IP cameras or any
TCP/IP device beyond the 300ft (100m) limit of Ethernet. The units do not filter out any
protocols, codes, or applications, ensuring compatibility with any IP camera and its software.

IPB-A1100Q

IPB-A1200Q

Range

3,900’ (1,200m)

5,900’ (1,800m)

Input connector

RJ-45

Output connector

RJ-45

BNC

Operating voltage

5VDC (adapter included)

Current draw (power supply)

750mA

Link cable

Cat5 or better

Cat6 recommended

RG59/U or better

RG6/U recommended

Cat5e/6 cable

TIA/EIA—568-B

Ethernet speed

10/100Mbps

Specifications:

Introduction:

Parts List:

2 x Active IP Baluns
2 x 5VDC power adapters

8 x Mounting screws
8 x Plastic anchors

1 x Manual

Overview:

BNC Connector

Tx/Rx

DIP Switch

Mounting tabs

(4 per unit)

RJ-45

Connector

5VDC

Connector

RJ-45

Connector

Status LEDs

(Power / RX / Link)

IPB-A1100Q

Rear

Dimensions

Front

(same for both models)

IPB-A1200Q

Rear

PB-A1100Q shown. Both models are the same size.

Front

Rear

Top

25/8”

67mm

11/16”

27mm

41/2”

115mm

511/16”

145mm

2 SECO-LARM U.S.A., Inc.