®
SD-R400-BQ
Microwave RTE Sensor
Manual
Features:
12~24 VDC Operating voltage
24.150GHz Microwave Doppler technology
10ft (3m) Sensing range, adjustable
Adjustable relay output time, 1~33 s
Small size allows for a wide range
of applications
Universally compatible, install the sensor
above automatic doors for no-touch
ingress/egress
More consistent detection in large areas
and over a wide range of temperatures
Indoor use only
ENFORCER Microwave RTE Sensor
p
Introduction:
The ENFORCER Microwave RTE Sensor is a compact motion sensor with an adjustable output
timer that can be connected to an access control keypad, gate opener, and can be used to trigger
any device with an egress input.
Parts List:
1x Microwave sensor 2x Mounting screws 1x Mounting template
1x 5-Pin connector cable 1x Manual
Specifications:
Operating voltage 12~24 VDC
Current
draw
Sensor frequency 24.150GHz
Sensor range 3'~10' (0.9~3m), adjustable
Sensor
angle
Detection
angle
Min. detection speed 5cm/s
Output relay 2A@30VDC (0.5A@125VAC) Dry relay, NO/NC/COM
Relay output time 1~33 s
Mounting height 6'~10' (1.8~3 m)
Cable length 8' (2.5m)
LED Indicator Red on relay activation
Case material Black ABS and polycarbonate
Operating temperature -4°~131° F (-20°~55° C)
Dimensions 31/8"x23/8"x21/8" (80x60x54 mm)
Weight 2.5-oz (70g)
Standby 23mA@12VDC / 14mA@24VDC
Active 39mA@12VDC / 21mA@24VDC
Vertical 0°~90°
Horizontal ±30°
Front/back 20°~30°
Left/right 60°~70°
Overview:
31/8"(80mm)
Front
Side
21/8" (54mm)
Front
(cover removed)
LED Indicator
23/8"
(60mm)
Microwave
emitter
ad
Connector
cable hole
2 SECO-LARM U.S.A., Inc.
Loading...