SECO-LARM ENFORCER PC-U0405-PULQ, ENFORCER PC-U0910-PULQ, ENFORCER PC-U1810-PULQ, ENFORCER PC-U1830-PULQ, ENFORCER PC-U1820-PULQ User Manual

Download

Page 1

12VDC Switching CCTV Power Supply

Manual

PC-U

1820-PULQ shown

Model

Number

Number of

Outputs

Total Supply

Current

Max. Current

per Output

PC-U0405-PULQ 4 5A 1.6A

PC-U0910-PULQ 9 10A 1.6A

PC-U1810-PULQ 18 10A 1.1A

PC-U1820-PULQ 18 20A 1.6A

PC-U1830-PULQ* 18 30A 1.85A

*Special order item. Please contact SECO-LARM for details.

Page 2

ENFORCER 12VDC Switching CCTV Power Supply

2 SECO-LARM U.S.A., Inc.

Model

PC-

U0405

PULQ

PC-

U0910

PULQ

PC-

U1810

PULQ

PC-

U1820

PULQ

PC-

U1830

PULQ

Outputs

4 9 18 18 18

Total supply

current

5A 10A 10A 20A 30A

Max.

current per

output

1.6A 1.1A 1.6A 1.85A

Output fuse

PTC

Output voltage

11.0~13.8

VDC (adjustable by trimpot

, ±10%

)

Input voltage

* 100~22

0 VAC

±10%

(47~63 Hz)

110/220 VAC (50/60 Hz)

LED

Indicators

Cover

Green: AC Input, Red: DC Output

PDM*

* Red

: DC Output

Operating

humidity

90% (non-condensing)

Operating

temperature

32°~104° F (0°~40° C)

Dimensions

97/16"x101/4"x23/8" (240x260x60 mm)

10"x10

/16"x31/8" (254x262x79 mm)

Weight

4-lb 3-oz

(1.89kg)

4-lb 7-oz

(2.01kg)

5-lb 2-oz

(2.31kg)

6-lb 1-oz

(2.76kg)

6-lb 4-oz

(2.84kg)

*UL listed for 90~120 VAC

**Power distribution module

Specifications:

Overview:

Features:

Parts List:

1x Power supply

Power cord

Rubber rings

2x Keys

Manual

•

100~220 VAC Input*

• New lightweight, cost-effective design

• Improved efficiency

• Adjustable output to reduce voltage drop

•

Outputs protected with PTC fuses

• Individual output status LEDs

• Heavy-duty steel case with cover

• Built-in short circuit and overheat protection

Output indicator LEDs

Power output terminals

Power output switch

Power input socket

Output voltage trimpot

(location varies)

Page 3

ENFORCER 12VDC Switching CCTV Power Supply

SECO-LARM U.S.A., Inc. 3

Installation:

Power

able

nock-outs

Cam lock

Ventilation holes

Fig. 1

- Knock

-Outs

Fig. 2 - Power Input Socket

Fig. 3

- Connecting power

outputs

Negative (-)

Positive (+)

Fig. 4

- Adjusting output

voltage

Min.

Max.

LED Indicator Status:

1. Find a suitable location to install the power supply.

The power supply should be installed out of sight, and in a place protected from weather and high humidity. The power supply must have adequate ventilation. Insufficient ventilation may cause overheating and damage could result.

2. Remove one of more of the cable knock-outs, depending on how many connections will be made. Knock-outs are shown in Fig. 1 to the right. If desired, use an optional bushing, grommet, or other sleeve to protect wires passing through the hole(s).

3. Screw the power supply to the wall or other mounting surface using 5/32"x1" (4x26 mm) screws and plastic anchors (not included). First, screw in the top screw(s) and hang the power supply. Then, if applicable, screw in the bottom two screws to fully secure the unit in place.

4. Plug the power cable into the power input socket (Fig. 2).

WARNING: Always test output voltage before

connecting devices to the power supply.

5. Connect cameras and other devices to the power outputs, while observing correct polarity as shown in Fig. 3. To minimize voltage drop, use 18-guage or larger wire.

6. If voltage drop is large, adjust the output voltage trimpot as shown in Fig. 4. NOTE: The output voltage trimpot changes voltage for

all outputs by ±10%. Test all outputs to ensure voltage does not exceed device specifications.

Location Color ON OFF

Cover

Green

Connected to AC power No AC input

Red

DC Output to PDM OK No DC output

Power distribution module

Red

Terminal pair of output is working correctly

Terminal pair of output has no DC power

Page 4

ENFORCER 12VDC Switching CCTV Power Supply

4 SECO-LARM U.S.A., Inc.

Installation Notes:

Input Voltage

Note

(for PC

U1820

PULQ & PC

U1830

PULQ only)

OTICE

The SECO

LARM policy is one of continual development and improvement. For that reason, SECO

LARM

reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All t

rademarks

Inc. All

rights reserved.

WARRANTY:

This SECO

LARM product is warranted against defects in material and workmanship while

used in normal

service for two (2) years from the date of sale to the original customer. SECO-

LARM’s obligation is limited to the repair or

replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.

This Warranty is void if

damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,

improper or abnormal usage, or faulty installation, or if for any other reason SECO-

LARM determines that such equipment

is not operating properly as a result of causes other than defects in material and workmanship.

The sole obligation of

SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM

’s

option. In no event shall SECO-

LARM be liable for any special, collateral, incidental, or consequential personal or property

damage of any kind to the purchaser or anyone else.

IMPORTANT

Users and installers of this product are responsible for ensuring this product complies

with all national,

state, and local laws and statutes. SECO-LARM

will not be held responsible for the use of this product in violation of any

current laws or statutes.

Also Available from

SECO

LARM

SECO-LARM

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Website:

www.seco

larm.com

Phone: (949) 261

2999 | (800) 662

0800

Email:

sales@seco

larm.com

PICSN7

MI_PC-Uxxxx-PULQ_180823.docx

CCTV Power

Supplies

12VDC AC Adapters

Power Converters

DC Connectors

PA-U0405

NULQ

shown

ST-UV12

S1.0Q

shown

ST-LA115

TPQ

shown

CA-161T / CA

151T

shown

•

ALWAYS TEST OUTPUT VOLTAGE BEFORE CONNECTING DEVICES.

• Indoor use only. Do not mount the unit where it may be exposed to weather or high humidity.

• For professional installation only.

• Installation must conform to all local laws and building codes.

For 220VAC input voltage,

locate the input voltage switch

on the bottom of the enclosure. Switch the input voltage from 110V to 220V as shown in Fig. 5.

110V

220V

Fig. 5 - Input voltage switch