Seco-Larm ENFORCER 190 Specsheet
pi-E-190.docx
1-949-261-2999
1-800-662-0800
1-949-261-7326
Web: www.seco-larm.com
Email: info@seco-larm.com
Copyright © 2010
SECO-LARM U.S.A, Inc.
All rights reserved
16842 Millikan Avenue
Irvine, CA 92606
Tel:
Fax:
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
SECO-LARM
Eliminates the need for unsightly individual
detectors on each pane of glass.
Detects the high-frequency sound of
glass breaking.
Patented yellow turbulence LED allows quick
and simple sensitivity adjustment without
having to use a test meter.
Red LED shows alarm output status.
Wide detection radius:
25ft radius if ceiling-mounted
34ft radius if wall mounted
Equipped with an N.C. tamper circuit to
protect against opening or breaking the case.
Installs without RF-shielded cable.
Compact size and attractive appearance
allows for discreet installations anywhere.
ENFORCER-190
Glass Break / Audio Discriminator
Features:
Specifications:
Power
12VDC
Current drain
Standby
5mA
Triggered
80mA
Detector output
2A Dry relay NO/NC/COM
Tamper output
N.C. Contact
Status LEDs
Yellow
Environmental noise level
Red
Trigger signal sent to alarm
Operating temperature
14° ~122° F (-10°~50° C)
Case construction
ABS Plastic
Dimensions
41/2”x23/4”x11/8” (115x70x27 mm)
Weight
3.35-oz (95g)
Status LEDs:
LED
What it does
Yellow
Indicates whether environmental
noise is too high, reducing the
likelihood of false alarms.
Red
Indicates whether the sensor has
been triggered and is sending a
signal to the alarm.
Loading...