Seco-Larm EB-P316-60MQ, EB-P304-01MQ, EB-C304-01EQ User Manual
(EB-C304-01EQ shown)
VPD (Video/Power/Data) Combiners
Manual
Midpoint VPD Combiners:
Model #
Power
Channels
EB-P304-01MQ
Passive
4
EB-P316-60MQ
Passive
16
EB-D304-01MQ*
12VDC
4
EB-D316-60MQ*
12VDC
16
EB-C304-01MQ*
24VAC
4
EB-C316-60MQ*
24VAC
16
*Special Order Only
ENFORCER VPD (Video/Power/Data) Combiners work in conjunction with standard passive
VPD baluns and RJ45 cables to simplify and organize a large scale CCTV installation. Using this
allows for increased flexibility and simplified, more organized cable installation, providing power to
cameras while delivering high quality video all over a single CAT5e/6 cable. Troubleshooting is
therefore greatly simplified and clutter reduced. ENFORCER VPD Combiners are compatible with
all HD analog, including HD-AHD, HD-CVI, and HD-TVI, as well as traditional analog formats.
Endpoint VPD Combiners:
Model #
Power
Channels
EB-P304-01EQ*
Passive
4
EB-P316-60EQ
Passive
16
EB-D304-01EQ*
12VDC
4
EB-D316-60EQ*
12VDC
16
EB-C304-01EQ
24VAC
4
EB-C316-60EQ*
24VAC
16
(EB-P304-01MQ shown)
ENFORCER VPD Combiners
Table of Contents:
Introduction ...................................................................................................................................... 2
Parts List .......................................................................................................................................... 2
Specifications .................................................................................................................................. 3
Overview .......................................................................................................................................... 4
Dimensions ...................................................................................................................................... 5
Installation ....................................................................................................................................... 6
Power Range ................................................................................................................................... 7
RJ45 Connections ........................................................................................................................... 7
Wiring the Passive Midpoint VPD Combiners ................................................................................. 8
Wiring the Active Midpoint VPD Combiners .................................................................................... 9
Wiring the Passive Endpoint VPD Combiners ............................................................................... 10
Wiring the Active Endpoint VPD Combiners .................................................................................. 11
Troubleshooting ............................................................................................................................. 12
Also Available from SECO-LARM ................................................................................................. 12
Warranty ........................................................................................................................................ 12
Introduction:
All ENFORCER VPD Combiners are capable of transmitting the various HD Analog formats such
as HD-AHD, HD-CVI, or HD-TVI. These formats are supported in addition to traditional analog
formats.
ENFORCER VPD Passive Midpoint Combiners are typically installed between the camera and
DVR combining data, video, and camera power via CAT5e/6 cable to simplify installation and allow
for easy expandability and serviceability. The passive combiner allows for the use of any external
ENFORCER low voltage power supply or a compatible third party low voltage power supply.
ENFORCER VPD Active Midpoint Combiners provide the same benefits as the Passive Midpoint
Combiners, but include either an integrated 12VDC or 24VAC (for greater distances) power supply.
ENFORCER VPD Passive Endpoint Combiners are typically installed near the DVR and include
BNC connectors to connect directly to the DVR. This combines data, video, and camera power via
CAT5e/6 cable to simplify installation and allow for easy expandability and serviceability. The
passive combiner allows for the use of any external ENFORCER low voltage power supply or a
compatible third party low voltage power supply.
ENFORCER VPD Active Endpoint Combiners provide the same benefits as the Passive
Endpoint Combiners, but include either an integrated 12VDC or 24VAC (for greater distances)
power supply.
All 16 channel versions are rack mountable or wall/desk mountable.
IMPORTANT: Only low voltage power supplies may be used.
Parts List:
1x VPD Combiner 2x Wall mount brackets 4x Screws for brackets1 1x Manual
1x Power cord (4ft)2 1x Spare glass fuse2 4x Rubber feet
1
16ch models include 6x screws for brackets
2
Powered models only
2 SECO-LARM U.S.A., Inc.
Specifications:
Midpoint VPD Combiners
Model #
EB-P304-01MQ
EB-P316-60MQ
EB-D304-01MQ*
EB-D316-60MQ*
EB-C304-01MQ*
EB-C316-60MQ*
Type
Passive Midpoint
12VDC Midpoint
24VAC Midpoint
Channels 4 16 4 16 4 16
Video range
CVBS
984’ (300m)
HD-AHD
720p: 1050’ (320m); 1080p: 722’ (220m)
HD-CVI
720p: 1476’ (450m); 1080p: 820’ (250m)
HD-TVI
720p/1080p: 820’ (250m)
Video format
NTSC, PAL, SECAM
Maximum input
1Vp-p
Frequency response
DC to 60MHz
CMMR
60dB , 20kHz~60MHz
Wire category
CAT5e~CAT6
BNC Connection
Nickel-plated
Impedance
Coax
75Ω@1MHz
RJ45
100Ω@1MHz
Max. amperage
1A@12VDC/24VAC
1A@12VDC
1A@24VAC
Data range
2,400' (800m)
DC Loop resistance
29Ω/1,000' (9.5Ω/100m)
Differential capacitance
19pF/ft max (62pf/m max)
Output voltage
N/A
13.5VDC
26VAC
Fuse
1.5A max/CH
Input power
N/A
90~240VAC
110VAC
Input power fuse
N/A
F2AL250V
F8AL250V
F2AL250V
F8AL250V
Operating temperature
-14~140°F (-10~60°C)
Humidity range
0~95%, non-condensing
Case material
Steel
Weight
0.89-lbs
1.93-lbs
2.98-lbs
8.49-lbs
5.64-lbs
18.81-lbs
(404g)
(876g)
(1350g)
(3850g)
(2558g)
(8532g)
Dimensions
See Dimensions (pg. 5)
Endpoint VPD Combiners
Model #
EB-P304-01EQ*
EB-P316-60EQ
EB-D304-01EQ*
EB-D316-60EQ*
EB-C304-01EQ
EB-C316-60EQ*
Type
Passive Endpoint
12VDC Endpoint
24VAC Endpoint
Channels 4 16 4 16 4 16
Video range
CVBS
984’ (300m)
HD-AHD
720p: 1050’ (320m); 1080p: 722’ (220m)
HD-CVI
720p: 1476’ (450m); 1080p: 820’ (250m)
HD-TVI
720p/1080p: 820’ (250m)
Video format
NTSC, PAL, SECAM
Maximum input
1Vp-p
Insertion loss
0.3dB per pair from 20kHz~60Mhz
Frequency response
DC to 60MHz
CMMR
60dB , 20kHz~60MHz
Wire category
CAT5e~CAT6
BNC Connection
Nickel-plated
Impedance
Coax
75Ω@1MHz
RJ45
100Ω@1MHz
Max. amperage
1A@12VDC/24VAC
1A@12VDC
1A@24VAC
Data range
2,400' (800m)
DC Loop resistance
29Ω/1,000' (9.5Ω/100m)
Differential capacitance
19pF/ft max (62pf/m max)
Output voltage
N/A
13.5VDC
26VAC
Fuse
1.5A max/CH
Input power
N/A
90~240VAC
110VAC
Input power fuse
N/A
F2AL250V
F8AL250V
F2AL250V
F8AL250V
F2AL250V
F8AL250V
Operating temperature
-14~140°F (-10~60°C)
Humidity range
0~95%, non-condensing
Case material
Steel
Weight
0.96-lbs
2.2-lbs
3.06-lbs
8.75-lbs
5.72-lbs
19.17-lbs
(436g)
(998g)
(1388g)
(3968g)
(2596g)
(8694g)
Dimensions
See Dimensions (pg. 5)
*Special Order Only
ENFORCER VPD Combiners
SECO-LARM U.S.A., Inc. 3
ENFORCER VPD Combiners
Overview:
Passive Midpoint VPD Combiners:
NOTE: EB-P304-01MQ shown. EB-P316-60MQ has similar connections, but has 16 channels.
Power Input Terminals
(12/24 VAC/VDC)
Video RJ45
(to DVR video balun)
Data RJ45
(to RS-485 controller)
Power Status LEDs
Active Midpoint VPD Combiners:
NOTE: EB-D304-01MQ shown. EB-C304-01MQ has similar connections. EB-D316-60MQ and EB-C316-60MQ have similar connections, but
have 16 channels. Power switch and fuse on the back of the unit are not shown.
Video RJ45
(to DVR video balun)
Video/Power/Data RJ45
(to camera VPD balun)
Data RJ45
(to RS-485 controller)
Power Status LEDs
Passive Endpoint VPD Combiners:
NOTE: EB-P304-01EQ shown. EB-P316-60EQ has similar connections, but has 16 channels.
Video/Power/Data RJ45
(to camera VPD balun)
Video BNC
(to DVR)
Power Input Terminals
(12/24 VAC/VDC)
Power Status LEDs
Data RJ45
(to RS-485 controller)
Ground screw
Video BNC
(to DVR)
Active Endpoint VPD Combiners:
NOTE: EB-D304-01EQ shown. EB-C304-01EQ has similar connections. EB-D316-60EQ and EB-C316-60EQ have similar connections, but
have 16 channels. Power switch and fuse on the back of the unit are not shown.
Data RJ45
(to RS-485 controller)
Video/Power/Data RJ45
(to camera VPD balun)
Power Status LEDs
Video/Power/Data RJ45
(to camera VPD balun)
4 SECO-LARM U.S.A., Inc.
Loading...