Copyright 2013 © SECO-LARM U.S A, Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
16842 Millikan Ave, Irvine, CA 92606
Tel: 949-261-2999 / 800-662-0800 Fax: 949-261-7326
sales@seco-larm.com www.seco-larm.com
Passive Video, Power, and Data Balun
Transmits up to 1,300ft (400m) color video or
up to 1,950ft (600m) B/W video
Transmits power for 12/24 VAC/VDC cameras
Transmits data up to 984ft (300m)
High immunity from interference
Includes DC plug and DC jack (only one used at
a time)
Pigtails for flexible installation
Uses low-cost Cat5e/6 cable instead of costly
coaxial cable
RJ45 Jack for easy installation
Passive operation – No external power required
Built-in surge protection
<2dB per pair from DC~6MHz
UTP (Unshielded Twisted Pair) 24~16 AWG
656’ (200m)@12/24 VAC/VDC
19pF/ft max. (62pF/m max.)
5” (127mm) (longest cable)
23/8”x11/8”x13/16” (61x15x21 mm)
*Shorter range may result when used with a DVR.
Color: Up to 1,300ft (400m)
B/W: Up to 1,950ft (600m)
Power: See chart below
Data: Up to 984ft (300m)
ENFORCER
PTZ Camera
(EV-7105-NPEQ)
Remote
DVR, monitor,
switch, etc.
Passive Video, Power,
and Data Balun
(EB-P101-20VQ)
Passive Video, Power,
and Data Balun
(EB-P101-20VQ)
Connect a PTZ Camera to a DVR
Also Available from SECO-LARM®:
RJ45 to Terminal Block (CA-171T – Sold Separately):
Connect the CA-171T to the
EB-P101-20VQ for the option of
connecting Cat5e/6 cable via
terminal block