Seco-Larm E-964-S50TB Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright 2016 © SECO-LARM U.S.A., Inc. All rights reserved.

All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PI_E-964-S50TB_160516.docx

Multi-Frequency Single Photobeam

E-964-S50TB Single infrared beam, Up to 50ft (15m), Small size

Features:

 4 selectable frequencies to reduce interference
 Small size for a less conspicuous installation
 Simple to install
 Signal strength indicator for easier alignment
 Weatherproof for indoor/outdoor use (IP65)
 Built-in AGC control to filter out lighting disturbances
 LED indicators for power, signal strength, and trigger
 Mounting hardware included

Specifications:

Number of beam channels

Single infrared beam

Number of beam frequencies

4

Sensor range

Up to 50ft (15m)

Infrared LED wavelength

940nm

LED beam spread angle

Approximately ±10°

Interrupt speed*

50ms

Input power

10~24VDC

Current
draw (max)

Transmitter

15mA@12VDC

Receiver

30mA@12VDC

Relay output

NO/NC relay

(set by jumper, default is N.C.)

0.5A@30VAC/VDC

LED (Transmitter)

Green - Indicates connected to power

LEDs
(Receiver)

Power (Green)

Indicates connected to power

Signal (Yellow)

Indicates receiver's signal is weak

or beam is broken

Alarm (Red)

Indicates transmitter & receiver are not

aligned or beam is broken

IP rating

IP65

Operating Temperature

-13°~131°F (-25°~55°C)
maximum humidity 95%

Dimensions

311/16"x23/8"x113/16" (94x60x46 mm)

Weight

2.6-oz (74g)

*This is the minimum time interval for breaking the beam which will trigger the output.

The E-964-S50TB is a simple, easy-to-use, and easy-to-install single-beam
infrared motion sensor with 4 selectable frequencies. The device easily installs
almost anywhere to provide an invisible beam that, when broken, sends a
signal to activate a light, beeper, or other device. This makes the device perfect
for use as part of an access control system, a door or window monitor, a retail
store customer alert, or many other places where the user needs to know that
someone has entered a specific room or building or other protected area. The
E-964-S50TB is weather-proof, and comes with a built-in AGC control circuit
that helps to filter out possible disturbance caused by local lighting conditions.

Overview:

O N

1

2

Receiver

NC/NO Selector

Channel

Selection Switch

Wire Terminals

Side

113/16" (46mm)

Front

23/8" (60mm)

311/16"

(94mm)

Front Cover Removed

Signal Strength LED

Alarm Indicator LED

Power LED

Wire Terminals

Mounting Hole

Wire Hole

Channel Selection Switch

Mounting Hole

O N

1

2

Transmitter

Wire Hole