Page 1
Page 2
• Make sure the mains power supply (220V) does not fluctuate by more than ±10%. In case of
Page 3
Page 4
After installing the printer driver, you can plot jobs directly from CorelDraw, Freehand or Adobe Illustrator
Artcut User Manual for information on installing and using the software.
Page 5
As various media thicknesses require different knife settings, or even special blades, you may
Page 6
Knife setting correct
Knife setting too deep
Page 7
Recommended values for several media:
normal self-adhesive media: approx. 100g
Transflex media: approx. 100g
Neon foil: approx. 110g
Flock foil: approx. 120g
Laminated media: approx. 180g-250g,
Sandblast foil: approx. 300g-400g
When setting the cutting force, please note that the correct setting mainly depends on the knife
Page 8
After weeding, you can use a transfer press to transfer flock and
Apply application tape to the weeded material and use a roller
Page 9
Page 10
Accuracy
Ambient temperature
Loading...