• Make sure the mains power supply (220V) does not fluctuate by more than ±10%. In case of
After installing the printer driver, you can plot jobs directly from CorelDraw, Freehand or Adobe Illustrator
Artcut User Manual for information on installing and using the software.
As various media thicknesses require different knife settings, or even special blades, you may
Knife setting correct
Knife setting too deep
Recommended values for several media:
normal self-adhesive media: approx. 100g
Transflex media: approx. 100g
Neon foil: approx. 110g
Flock foil: approx. 120g
Laminated media: approx. 180g-250g,
Sandblast foil: approx. 300g-400g
When setting the cutting force, please note that the correct setting mainly depends on the knife
After weeding, you can use a transfer press to transfer flock and
Apply application tape to the weeded material and use a roller
Accuracy
Ambient temperature
Loading...