Sebo FELIX Premium, FELIX Kombi Owner's Manual

10

OWNER’S MANUAL

For Household Use Only

FELIX Premium FELIX Kombi

TABLE OF CONTENTS

Technical Details 2
Important Safety Instructions 3
Special SEBO Product Features 4

S-Class Filtration 4
Bag Full or Clog Warning – Auto Shut-Off 4
FELIX Flexibility 4

Identification of Parts 5
Assembly 5
Optional Attachments 5
Standard Attachments 5
Power Heads and Floor Tools 5
Operating Instructions 6

Starting the Machine 6
Operating the Machine 6
Suction Control 6
Using the Hose Handle & Attachments 6
Detachable Suction Unit 6

Additional Operating Instructions for FELIX Premium with ET Power Head 7

The Brush Height Adjustment Feature 7
Indicator Lights 7

ET Power Head Maintenance 8

Removing the Brush Roller 8
Cleaning the Brush Roller 8

Use and Maintenance of Floor Tools and Brushes 8

The Premium Parquet Brush 8
The Kombi Nozzle 8
The Turbo Head 8

Vacuum Maintenance 9

Changing the Filter Bag 9
Changing the Motor Protection Filter 9
Changing the Exhaust Filter 9

Clog Removal 10

Clogs in the Hose 10
Clogs in the Swivel Neck 10

Clog Removal in the ET Power Head 10

Clogs in the Airflow Pathway 10
Clogs in the Swivel Neck 10

Trouble-Shooting Guide 11
Additional Trouble-Shooting Guide for ET Power Heads 12
Ice Blue Premium/Kombi - Bag Housing with Handle Schematic and Part Numbers 13
Ice Blue Premium - 12” Power Head (ET-1) Schematic and Part Numbers 14
Ice Blue Premium- 15” Power Head (ET-2) Schematic and Part Numbers 15
Fun Premium/Kombi - Bag Housing with Handle Schematic and Part Numbers 16
Fun Premium - 12” Power Head (ET-1) Schematic and Part Numbers 17
Classic Premium/Kombi - Bag Housing with Handle Schematic and Part Number 18
Classic Premium - 12” Power Head (ET-1) Schematic and Part Numbers 19
Warranty 20
How To Contact SEBO 20

2

Vacuum motor 1300 watts
Water lift (at motor) 90 inches
Airflow (at motor) 102 CFM
Filter bag capacity .92 gallon
Sound level 68 dBA
Body weight (depending on
the attachment) 9.9 - 15.8 lbs
Motor protection thermal cut-out
Cord length 32 feet
Range 34.5 feet

Technical details may be subject to change.

TECHNICAL DETAILS - VACUUM

ET-1 ET-2

Brush motor 175 Watts, 1.6 Amps 200 Watts, 1.8 Amps
Width 12 in. 15 in.
Weight 5.4 lbs. 5.7 lbs.
Brush roller Replaceable Replaceable
Brush drive Toothed belt with Toothed belt with

electronic overload electronic overload
protection protection

Technical details may be subject to change.

TECHNICAL DETAILS - ET POWER HEADS

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE

3

1. Do not leave vacuum while plugged in. Unplug from
outlet when not in use and before servicing.

2. Do not use outdoors or on wet surfaces.

3. Do not use near small children or pets. Do not allow to be
used as a toy. Use of this product by children should
always be supervised by an adult.

4. Use only as described in this manual. Use only
manufacturer-recommended attachments.

5. Do not use with a damaged cord or plug. If vacuum is not
working as it should, has been dropped, damaged, left
outdoors, or dropped into water, take it to a SEBO service
center.

6. Do not pull or carry by cord, use cord as a handle, close a
door on cord, or pull cord around sharp edges or corners.
Do not run vacuum over cord. Keep cord away from heated
surfaces.

7. Do not unplug by pulling on cord. To unplug, grasp the
plug – not the cord.

8. Do not plug in if power switch is in the “ON” position.

9. Do not use outlets above counters to plug in vacuum –
damage to items in the surrounding area could occur.

10. Always carry the vacuum over steps and sills.

11. Do not handle plug or vacuum handle with wet hands.

12. Do not put any object into vacuum openings. Do not use
machine with any openings blocked. Keep openings free
of lint, hair, and anything that may reduce air flow.

13. Do not re-use filter bags or wash the filters.

14. Do not remove any screws from vacuum.

15. Do not vacuum up anything that is burning or smoking,
such as cigarettes, matches, or hot ashes.

16. Do not use vacuum without filter bag and/or filters in place.

17. Turn off all machine controls before unplugging.

18. Use extra care when cleaning on stairs.

19. Do not use machine to vacuum up flammable or
combustible liquids such as gasoline or use in areas
where they may be present.

20. Machines can cause a fire when operated near flammable
vapors or materials. Do not operate this vacuum near
flammable fluids, dust or vapors.

21. Maintenance and repairs must be done by qualified personnel.

22. Use only original SEBO replacement parts.

23. Do not use vacuum as a step.

24. Do not use the handle assembly (4), which inserts into the
top of the filter bag housing, to carry the machine. The
carrying handle is located on the side of the machine.

25. If vacuum is used on plush carpet or carpet with thick
padding, do not leave machine standing in one place with
machine turned on.

26. While the vacuum is in use, the power cord should be
unwound from the cable reel at least two thirds of its length.

27. Keep hair, loose clothing, fingers, and all parts of body away
from vacuum openings and moving parts. Do not place
fingers or other body parts under vacuum unless it is
unplugged. Do not touch the brush roller while the machine
is plugged in.

28. Do not place the power head over rug or carpet edges.

29. The vacuum has a manual reset thermal protector. The
protector is reset by switching off the vacuum. The thermal
protector needs some time to cool down after switching off!
Turn off the machine and unplug it before trouble shooting.
Check the vacuum for air blockages or mechanical failures
before switching on.

30. Store the vacuum in a dry place at room temperature. When
the vacuum is not in use, you should rewind the cord onto
the cord reel

31. Any other servicing should be performed by an authorized
service representative.

32. The hose contains electrical wires. Do not use if damaged,
cut, or punctured. Avoid picking up sharp objects.

33. Always unplug vacuum before connecting or disconnecting
either hose or power head.

34. Use a SEBO power head only in combination with a SEBO
vacuum cleaner.

35. Do not connect power head to a malfunctioning or damaged
vacuum.

When using an electrical appliance, basic precautions must always be followed.

To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than
the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any
way. Connect only to the outlet type specified on the serial number plate underneath the machine.

SAVE THESE INSTRUCTIONS.

WARNING: To reduce the risk of fire, electric shock, or injury:

!

SPECIAL SEBO PRODUCT FEATURES

4

Your SEBO FELIX vacuum is among the most technically advanced vacuum cleaners in the world. Some of its
unique features are:

•

S-Class Filtration. Certified by leading Allergy foundations in Europe, the FELIX vacuum provides the user

with S-Class filtration of 99.9% of particles to 0.3 microns. This is accomplished by the SEBO three-step filtra­tion system. First, the three-layer full-size filter bag (A) collects the vast majority of the debris. Then, the
remainder of the particles are collected by the motor protection filter (B) which is positioned underneath the
filter bag. Finally, the electrostatic exhaust filter (C) cleans the exhaust air that the vacuum emits. With 250
square inches of surface, the exhaust filter absorbs even the smallest particles. SEBO’s unwavering attention
to the complete sealing of the machine ensures no dirt escapes around the filters. If the filters are changed
regularly (every 10-20 bags), the FELIX is perfect for allergy or asthma sufferers.

•

Bag Full or Clog Warning Light – Auto Shut-Off. If the vacuum’s air flow pathway becomes restricted

due to a full bag or the existence of a clog, the orange “BAG FULL OR CLOG” indicator will display. If the user
ignores this warning, the suction motor will heat up due to the lack of cooling provided by the airflow. Once the
motor reaches a certain temperature it will shut off to protect itself from damage. The user should turn the
switch off, unplug the machine and immediately insert a new bag or remove the clog (to remove a clog, refer
to the Clog Removal section on page 10). After approximately 30 minutes, the motor will have cooled and the
vacuum can be restarted. If the airflow is still restricted, the “BAG FULL OR CLOG” indicator will again display
and the machine will shut off.

•

FELIX Flexibility. The unique design of the FELIX offers flexibility and ease of use:

D. Detachable Suction Unit

– When detached from the power head or floor tool, the FELIX transforms itself

into a lightweight, powerful suction unit, which can be carried around using its comfortable carrying handle.
Ideal for cleaning stairs, car interiors or upholstery.

E. Turning swivel neck

– on-hand maneuverability. The swivel neck of the FELIX gives 90º vertical and 180º

horizontal movement, providing superb maneuverability for easy cleaning around and under obstacles.

F. Flat and flexible

– With its 6-inch profile and flat-to-the-floor design, the SEBO FELIX makes cleaning under

furniture and hard-to-reach places easy.

SEBO three-step

filtration system

D

E

F

Bag full or

clog warning indicator

FELIX flexibility

IDENTIFICATION OF PARTS

5

Place the power head (16, 28) or floor tool (29, 30, 31) on the floor with the
swivel neck (20) upright. Hold the vacuum vertically and Insert the suction
opening of the vacuum into the swivel neck of the head or tool. Push firm­ly and evenly downward until the tool release button (14) snaps into the
locked position - see figure 1.

Insert the black end of the hose (6) into the connection on the filter cover
(8)- see figure 2a. Insert the hose handle (19) into the suction opening (18)
on the side of the vacuum - see figure 2b. Press the hose into place on the
side of the machine.

Install the attachment clip (21) to the handle assembly (5) using the includ­ed screw. Insert the crevice nozzle and upholstery nozzle into the clip - see
figure 3.

Standard Attachments

21. Attachment clip

22. Crevice Nozzle

23. Upholstery Nozzle

NOTE: All illustrations shown in this manual represent the FELIX Premium model except
where part numbers and instructions are different for each model.

Power Heads

16. ET-1 Power head, Standard on
Premium, optional for Kombi.
White, orange or ivory

28. ET-2 Power head, Standard on ICE
Blue 2, optional for Ice Blue Kombi.
White

Floor Tools

29. Premium Parquet Brush, standard
on Premium, optional for Kombi.
Dark gray, orange or ivory

30. Kombi Nozzle, standard on Kombi,
optional for Premium. Dark gray,
orange or ivory

31. Turbo Head, air driven rotating
brush - optional for Premium and
Kombi.

1. Handle grip

2. Upper cable hook

3. On/Off switch, power control slider

4. Power cable

5. Handle Assembly

6. Hose

7. Bag full indicator

8. Filter bag cover

9. Filter bag housing

10. Filter bag housing release latch

11. Carrying handle

12. Exhaust filter

13. Filter retaining rings

14. Tool release button

15. Foot pedal

16. Power head

17. Cable hook

18. Suction opening

19. Hose handle

20. Swivel neck

ASSEMBLY

16

28

24

26

21

22

23

27

Optional Attachments

24. Hand-Held Turbo Brush ­air driven rotating brush.
Part # 6179 DA

25. Dusting Brush - for
cleaning delicate surfaces.
Part # 1329 DG

26. Straight Tube - 20” exten­sion tube for extended reach.
Part # 1084 HG

27. Extension Hose (9 ft.) ­Extends the reach to approx.
15 ft. Part # 1495 AM

The Dusting Brush, Straight
Tube and Extension Hose are
available as a 3-piece attach­ment kit. Part # 1998 AM

25

L

R

29

30

Figure 1 Figure 2

1
2
3

4

5

6
7

8
9

10
11
12

13

14
15
16

1
2

4

6

13
17

12

11
18

19

20
15

Figure 3

a.

b.

31

6

OPERATING INSTRUCTIONS

Starting The Machine

- Figures 3, 4 & 5

Before turning on your vacuum cleaner, make sure that the vacuum is in its
upright locked position and that you have a firm hold on the handle grip to keep
the machine from moving forward.

1. With the power switch (3) in the OFF position, turn the cable hook (17) to the
left or right to release the cable (4). Lift the cable off the upper cable hook ­see figure 3.

2. Adjust the telescopic handle tube (5) to the correct height by pulling out the
release tab (32) and gently pulling the tube out to lengthen, or pushing it in to
shorten. The tube will click into place when it reaches one of the three lengths
available. Release the tab. If the tab does not fit snugly in place, the tube is set
at an incorrect setting. Pull or push the tube until it locks into one of the three
settings.- see figure 4.

3. Plug the polarized power cord into a 120 volt wall outlet located near the floor.

4. Slide the On/OFF switch (3) downward to the ON position - see figure 5.

Operating the Machine

- Figure 5 & 6

You may adjust the suction control with the power control slider (3) as you vacuum different sur­faces or when using the accessory tools. Slide the button upward for less suction or downward for
more suction - see figure 5

When changing power heads and floor tools, always switch the vacuum off with the main power
switch (3), and then unplug the power cord. NOTE: When switching off the power switch, always
make sure the switch “clicks” into the OFF position before unplugging the power cord.

When you have finished using the vacuum, turn it off by sliding the on/off switch to the OFF posi­tion. Then, unplug the cord and wind it onto the upper cable hook and upper hook. The rubber tip
on the end of the handle allows the vacuum to be propped against a wall without damage.

WARNING!The quality, condition, coating, texture, age and manufacturing technique of all floor surfaces vary.

Therefore, vacuums with rotating brushes, including your SEBO, may damage some floor coverings or surfaces. Some types
of high-gloss hardwood floors, cushion vinyl, berber carpets, long shag, and delicate or hand-woven carpets are particularly vul­nerable to damage by rotating brushes. When possible, consult the materials supplied by your flooring manufacturer for infor­mation on proper upkeep and cleaning. To ensure that your new SEBO vacuum cleaner is compatible with your floor, please

test the vacuum cleaner on each type of flooring surface in a small inconspicuous area to determine if any damage occurs.

!

4

Figure 3

Figure 4

17

Figure 5

+

ON

OFF

5

Using the Hose Handle, Hose & Attachments - Figures 6 & 7

The hose handle (19) is useful for vacuuming corners and hard-to-reach areas. You may use the hose
handle with or without an attachment. Pull the hose handle (19) from the suction opening (18) in the
side of the vacuum. Keep a firm hold on the handle grip while using the hose handle as it could tip
if the hose is pulled too far. The standard attachments [the crevice nozzle (22) and upholstery noz­zle (23)] and optional attachments {the hand-held Turbo brush (24), dusting brush (25) straight tube
(26) and extension hose (27)] may be inserted onto the hose handle. It is not necessary to turn off the
vacuum while switching the attachments.
NOTE: When using the hose and attachments, keep the vacuum in its upright position.

Detachable Suction Unit - When detached from the power head, or floor tool, the FELIX transforms
itself into a lightweight, powerful suction unit, which can be carried around using its comfortable
carrying handle (figure 7). Ideal for cleaning stairs, car interiors or upholstery. To remove a floor tool
or power head, switch off the power and unplug the vacuum. Press the tool release button (14) and
pull the vacuum out or the swivel neck (20).

To change a floor tool or power head, switch off the power and unplug the vacuum. Press the tool release button (14) and
pull the vacuum out or the swivel neck (20). Insert the vacuum into the new tool and push down gently until it snaps into
place. Plug the vacuum in and switch the power on.

Figure 7

3

32

Figure 6

19

18

If damage occurs, stop using the vacuum cleaner immediately!