Sebo 1600230, 4600115, 4600230, 1600115 User Manual
manual of horse blanket drying rack
1
User's Manual
Horse blanket drying rack
E
Version: 2.0
Edition : 01/11/2016
SeBo® BV Interior & Equipage
SINGLE DRYING RACK
EU TYPE 1600230
US TYPE 1600115
FOUR-FOLD DRYING RACK
EU TYPE 4600230
US TYPE 4600115
manual of horse blanket drying rack
2
Table of Contents
1. Introduction 3
2. Safety measures and warnings 3
3. Product description 8
3.1 Product description 8
3.2 Overview of functions 9
3.3 Dimensions 10
4. Parts overview 11
4.1 Exploded-view & parts list of single drying rack 11
4.2 Exploded-view & parts list of four-fold drying rack 12
5. Technical specifications 13
6. Mounting preparation 14
6.1 Overview of tools 14
6.2. Pre-mounting switch block onto foot 15
6.3 Surveying & determining position 16
7. Mounting 17
7.1. Mounting the foot to the floor 17
7.2 Placing the drying rack 18
7.3 Connecting plugs 19
8. Commissioning and operation 20
8.1 Switching the drying rack on and off 20
8.2 Ventilating before first use 21
8.3 Tilting drying rack 22
8.4 Clamping horse blankets onto drying rack 23
8.5. Tilting back drying rack and switching it on 24
8.6 Tilting drying rack with dry horse blankets 25
8.7 Taking off horse blankets from drying rack 26
8.8. Tilting back drying rack and switching it off 27
9. Faults 28
10. Maintenance and cleaning 29
11. Attestation of compliance 30
12. Waste disposal 31
13. Guarantee conditions 31
14. Contact 31
THIS MANUAL NEEDS TO BE SAVED SAFELY FOR FUTURE USE.
We advise you to contact your supplier for the period and conditions with respect to guarantee. We moreover
refer to our General Terms and Conditions of Sales and Delivery which can be obtained upon request. SeBo
Interior & Equipage B.V. may not be held liable for any damage or injury as a result of not adhering closely to this
manual and not taking into account usual caution while transporting, assembling, using and maintaining this horse
blanket drying rack. As a result of continuously trying to improve, it is possible that the product differs in detail
from that which is described in this manual. For this reason, the given instructions only serve as a guideline for
installing the product mentioned in this manual. This manual has been compiled with all possible care, but SeBo
Interior & Equipage B.V. cannot accept any liability for any faults in this manual or any possible consequences
thereof. Furthermore, all rights are reserved, and nothing from this manual may be reproduced in any manner
whatsoever.
manual of horse blanket drying rack
3
M
A
N
U
A
L
READ
CAREFULLY
!
!
1. Introduction
Congratulations on the purchase of your electric horse blanket drying rack
This user's manual provides the important and necessary information about mounting and using your
horse blanket drying rack. We will try to take you through this manual thoroughly, so that you are
entirely aware of the contents of this manual.
This manual needs to be stored in a safe, dry and shadowy
place. In case of damage or loss, the user must request a new
copy of the manual with the supplier.
2. Safety measures and warnings
Important notes:
When using electrical devices, all safety rules need to be taken into account to prevent the risk of fire,
electric shock or bodily injury, etc. For this reason, read through the safety regulations, but also
instructions for placing, working and using the drying rack carefully, before commissioning the drying
rack.
• Follow the directions and guidelines as described in this manual carefully. Never change the sequence
of the operations performed. If any of them are not clear with regards to mounting, contact your
supplier.
Subject to technical changes, without written notification.
Mounting:
• Keep to the applicable standards and legal regulations while installing.
• We recommend having the drying rack mounted by 2 people, as a standard
(qualified technicians / recognised installers).
• Check the supply immediately after receipt. We request you to contact your supplier immediately in
case of damage or incomplete supply.
• The materials need to be stored in a dry, ventilated space, not exposed to direct sunlight.
• Open the package carefully. Ensure that you do not damage the product.
Remove any available protective film and transport package of the blanket drier.
• To prevent damage to the drying rack, place the parts on a soft, clean and flat surface.
• Adding or removing parts, or processing or machining materials other than in the prescribed manner,
may have a negative influence on the safety of the drying rack and is thus to be strongly discouraged.
• Secure the mounting place via a security ribbon so that third parties are kept at a distance.
• Always wear the appropriate protective clothing (work gloves, dust mask, safety glasses, shoes with
anti-slip, etc.) when carrying out the activities.
manual of horse blanket drying rack
4
!
2. Safety measures and warnings (continued)
Location:
• The electric horse blanket drying rack is only intended for application in a well-ventilated space. A non-
ventilated space may lead to overheating.
• Do not expose the drying rack to rain, snow, spray, excessive pollution and condensing conditions.
• The location of the device must be:
• Dry.
• Free from dust and contaminated air particles.
• Well-ventilated by air.
• Free from vibrations.
• Between -25 °C and 50 °C and less than 80% humidity.
• Well lighted.
• Free from inflammable materials.
• Free from explosive gases and fluids.
• Place the device removed from other articles. Ensure that the device has at least about 50 cm free
space in both the standing and tilted position.
• Always place the device at an easily reachable place so that the device and be switched off “quickly
and easily”.
• Mount the drying rack on a flat, stable, fire-proof/heat-resistant surface
with sufficient load capacity. Ensure that the surface is clean and dry and that the drying rack is level.
Anchor the foot of the drying rack so that it cannot fall over.
• Make sure that all means of fastening are properly tightened. Check this regularly.
• The kind of means of fastening for floor mounting depends on the type of surface (steel, concrete or
wood). The means of fastening need to be determined by the installer and are not delivered by
default.
• Only use the four-fold drying rack on its own light group and earthing switch. Not more than 5
individual units on a group (depending on local regulations).
• Only use the drying rack in sockets provided with a protective earth and earthing switch.
• Check whether the voltage, indicated on the heating element, corresponds to the voltage of the
electrical point to which you want to connect. The current supply must satisfy the applicable legal
standards and national legislations.
• Do not use any extension cords.
• Do not use any multiple sockets since this device has too much power.
• Ensure that the electrical cable does not hang over (sharp) edges, does not need to make any sharp
bends, cannot be towed and does not touch any hot surfaces.
Keep the cable outside the walking route.
• Ensure that the drying rack and cords are at a safe location so that
nobody can slip, stumble or fall over it. If required, tape the cords
solidly to the floor.
• Place the device removed from other articles and out of reach of easily inflammable materials or
fluids.
• Do not use the drying rack in a surrounding with risk of fire close to gas tanks, gas pipes or sprays. This
gives rise to risk of explosion and fire.
• Do not install the drying rack close to sockets, distribution boxes, switches or
electric cables.
• In case of fire, use a fire extinguisher suitable for extinguishing an electrical installation.
manual of horse blanket drying rack
5
!!!
!
!
2. Safety measures and warnings (continued)
User:
• The blanket drier only needs to be used by people who are fully aware of what is in this user's manual.
• The blanket drier is not suited for use by children and people with a bodily, psychic or sensory
handicap.
• NOTE! NEVER use the blanket drier in the presence of children and animals.
• Keep the blanket drier out of reach of children and never leave them alone with the drying rack. When
choosing a place for the drying rack, take into account that it is out of reach of children. Keep the holes
in, so that they don't play with the drying rack.
Use:
• Just like every device that produces heat, there are risks associated with the electric drying rack. Not
observing safety regulations may result in serious fire injuries and fire. If any of them is not clear
related to use, contact your supplier.
• NOTE! The drying rack needs to be well vented before first use.
The drying rack has an automatic air vent. Before using the drying rack for the first time, process a
complete cycle once in order to discharge excessive air and fluid.
NOTE! The drying rack may discharge HOT FLUID upon first use. TAKE CARE OF FIRE
INJURIES!
• It is an electric horse blanket drying rack. Only use the blanket drier for what it is intended. Otherwise
life-threatening situations may occur!
• The horse blanket drying rack may only be used to dry horse blankets, breeches, saddle pads, and
tendon boots.
• NEVER put inflammable materials on the drying rack if it is in use, the drying rack is hot and may cause
bald spots and fire. NOTE: only use “non-flammable materials” which are resistant to temperatures of
90ºC.
• The drying rack becomes extremely hot during use (up to 90ºC), comparable to a heating radiator.
NOTE! Use only the grips intended for the purpose. Do not touch the drying rack itself if it is hot or in
use. Touching it may result in burns to the body, clothing or other sensitive materials. Even after use,
the drying rack still remains really hot for a certain time. Let the drying rack cool off for at least 30
minutes with respect to injury / risk of burns.
• Always use the blanket drying rack with the grips. Moreover, always wear protective
non-flammable clothing and gloves.
manual of horse blanket drying rack
6
!
!
!
!
!
2. Safety measures and warnings (continued)
• NOTE! Only use and tilt the drying rack if it has been switched off and is sufficiently cooled off.
• Warning! NEVER leave the drying rack unattended during use of cooling off. Also never use the drying
rack with an external voltage regulator like a dimmer, etc.; even that results in danger.
• NEVER place a horse blanket immediately from the drying rack onto your horse. This could cause
burns. Let the horse blanket cool off before using it.
• The drying rack is only drip-proof. NOTE! Never place a soaked horse blanket on the drying rack. The
switch block may not be wet during use.
• NOTE! Parts of the drying rack have sharp metal edges.
• NOTE! Ensure that fingers and limbs do not get jammed between racks and / or
hinge parts.
• NOTE! Ensure that the drying rack in vertical position is always locked with the lock pin at the place of
the hinge and that the adjusting bolt is tightened so that the drying rack cannot tilt free.
• If you want to tilt the drying rack, pull out the lock pin.
• NOTE! Ensure that when the rack tilts, the adjacent rack does not also tilt if blankets touch each other.
This could lead to serious bodily injury.
• Always use the drying rack with 2 hands at the indicated grips. Hold it firmly when it is tilting and place
the drying rack carefully on the ground.
NOTE! Ensure that feet and limbs do not get jammed under the rack.
• Use only the fluid intended for the purpose in the drying rack.
• Using other fluids could lead to serious injury
and irreparably damage the device.
• The heating element is equipped with overheat protection. As soon as the radiator fluid reaches the
temperature of 90°C, the fuse switches off the heating element to prevent further increase in
temperature. Note: the overheating protection is there to protect you against potential dangers.
• The overheating protection can be activated if air is present in pipe radiator or if the radiator is empty
(in case of leakage). Contact your supplier directly. Do not carry out any repair work yourself, it may be
dangerous.
• No longer use the drying rack in case of leakage. If the drying rack is active, the power supply needs to
be off. Before it can be used again, the drying rack must be checked and faulty parts replaced.
• Always switch off the drying rack if you are no longer using it. Remove the plug from the socket.
• If you notice shortcomings or a fault when using the drying rack, then immediately deactivate the
device and cut off the power connection. There is risk of fire, injury or damage in that instance.
• If the drying rack, electric cable or plug show damage or fault, contact your supplier, the manufacturer
or a recognised service point for repairs or replacement. Do not carry out any repair work yourself, it
may be dangerous.
• NEVER open the blanket drying rack. This may result in electric shocks and
every kind of guarantee expires with it.
manual of horse blanket drying rack
7
!!!
2. Safety measures and warnings (continued)
Cleaning & maintenance
• We recommend that you clean the drying rack regularly. Always let the drying rack cool off before
cleaning it.
• It is not allowed to clean the drying rack when it is being used, in view of the high temperature that
the drying rack can reach.
• Never cool off the drying rack by means of a water jet. Quickly forced cooling off may damage the
drying rack irreparably.
• Remove the tension from the device before you clean the device for your own safety.
• The drying rack is only drip-proof, as a result you need to be careful with water.
NOTE! Ensure that the switch block does not get wet when cleaning. Clean it with a soft, dry cloth.
• Clean the other parts of the drying rack with a damp soft cloth and/or with a recognised neutral
cleaning agent. Do not use any aggressive cleaning and/or abrasives.
Some cleaning agents produce an unhealthy fume or ignite if they are used on a hot surface.
• Dry the drying rack well after use.
• NOTE! Always wear gloves when venting, and use a cloth.
• We request you to contact your supplier if the pipe radiator needs to be filled with warming fluid.
• NOTE! The drying rack (pipe radiator) may only be filled with the indicated warming fluid Bio-CV-Fluid,
otherwise device may be irreparably damaged.
• The drying rack must be checked at least once a year for connections and damage. Immediately
remove defects such as loose connections, etc.
• The device must not be used if it is damaged.
• Repairs and maintenance to parts of the drying rack may only be done by specialist staff qualified for
the purpose / qualified installers and/or electricians.
Storage
• If the drying rack is not used for longer periods, we advise you to
store the drying rack inside so that climatological factors have the least
probability of damaging the drying rack.
• Pull the supports from the socket if you are not using the drying rack. Store the drying rack in the
package only if the drying rack has sufficiently cooled off.
• Always let the drying rack cool down before transport.
Disposal
• Dispose of the product in accordance with local legislation and regulation.
• SeBo Interior & Equipage B.V. does not accept any liability whatsoever for any damage or injury as a
result of not (strictly) observing the safety regulations and instructions in this manual, or of neglecting
while transporting, assembling, using and maintaining this product and any accompanying accessories.
SeBo B.V. is not responsible for any kind of damage.
manual of horse blanket drying rack
8
3. Product description
3.1 Product description
The electric horse blanket drying rack is an electrically heated pipe radiator intended for drying (nonflammable) horse blankets, breeches, saddle pads, and tendon boots.
This drying method increases the life cycle of the blankets, prevents mould and unpleasant odours.
The drying rack concerns a system which can be turned and inclined, due to which horse blankets can
be placed ergonomically and easily.
The drying rack is provided with clamps due to which the horse blankets can be fixed
easily. Since the excessively long horse blankets can be clamped into the chest clip, they can be used
for virtually all length dimensions.
The drying rack is made of stainless steel (SS) and is available as single and four-fold system.
The single system is composed of a foot, a single switch block and 1 rack.
The four-fold system is composed of a foot, a four-fold switch block and 4 racks.
Foot (single or four-fold)
The foot is to be mounted on the floor.
The kind of means of fastening for floor mounting depends on the type of surface (steel, concrete or
wood). The means of fastening need to be determined by the installer and are not delivered by
default.
Switch block (single or four-fold)
The switch block is easy to operate with a foot switch. With it, each rack can be switched on and off
separately. Power turns off automatically after 3 hours of use by default.
It can clearly be seen whether the drying rack is on or off via a lamp in the switch.
The switch block has connections with respect to the heating element and a 230V connection for EU
or 115V connection for the U.S.
The switch block is only drip-proof, it may thus not come in contact with water or moisture. The
switch block is mounted on the foot using screws.
Drying rack
The rack is filled with environmentally friendly heating fluid Bio-CV-Fluid. The rack is factory
pressured and checked for leakage. The rack is pre-mounted with warming element and hinge. This
rack must be placed at the foot and the plugs connected. The rack is provided with grips at the front
and top rack Use only these grips when using and tilting the rack. The drying rack itself becomes
extremely hot during use (up to 90ºC). Never touch the drying rack.
Heating fluid Bio-CV-Fluid.
The fluid refill is biodegradable, heats up to 20% faster than water, it is frost-resistant and not toxic
to the environment. Metals remain unaffected (no lime or corrosion), and the life of the heating
element is longer due to the fluid's special composition.
manual of horse blanket drying rack
9
3.2 Overview of functions
The functions of the (single) drying rack are presented below.
Automatic venting
(upon 1st use)
Grip
(for tilting)
Drying
rack
Element
Filler
cap
Foot switch
Floor mounting holes
Locking pin (against tilting)
Adjustin
Clamp for backrest
Grip
(for tilting)
Clamp for
chestpiece blanket
Hinge
Foot
Power Supply
manual of horse blanket drying rack
10
3.3 Dimensions
The dimensions of the (single and four-fold) drying rack are presented below.
The measurement is in cm.
You can set up the drying rack by simply turning it around the vertical axis.
1 RACK
4 RACKS
97
226
167
30
87.5
97
167
206.7
Loading...