Sears LXI series 934.43308390,LXI series 934.43308390 Owner's Manual
SEARS 19" TABLETOP
COLOR TELEVISION
WITH REMOTE CON-
TROL
Your Sears Television has added
value when you consider that
Sears has service units nation-
wide staffed with Sears trained
technicians-professional tech-
nicians specifically trained on
Sears home entertainment
products, having the parts, tools
and equipment to ensure that we
meet our ledge to you - "We Ser-
vice What We Sell"
Should a need ever exist for
repair parts or service, simply
contact any Sears Service Cen-
ter/Department.
WARRANTY
FULL 90-DAY WARRANTY ON COLOR TELEVISION
For the first 90 days from the date of purchase, Sears will repair this
television, free of charge, ifdefective in material or workmanship.
LIMITED WARRANTY ON ALL PARTS EXCEPT PICTURE TUBE
After 90 days from the date of purchase and up to one year, Sears
will furnish, free of charge, a replacement for the defective part in
this television. You pay for labor.
LIMITED WARRANTY ON PICTURE TUBE
After 90 days from date of purchase and up to two years, Sears will
furnish, free of charge, a replacement for the picture tube, if defec-
tive, You pay for labor.
WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE
NEAREST SEARS SERVICE CENTER/DEPARTMENT IN THE
UNITED STATES.
This warranty gives you specific legal nights, and you may also
have other rights which vary from state to state.
Sears, Roebuck and Co. Dept 817WA, Hoffman Estates, IL 60179
SEARS SERVICE
Your Sears TV combination has added
value when you consider that Sears has
service units nationwide staffed with
Sears trained technicians...professional
technicians specifically trained on Sears
home entertainment products, having
the parts, tools and equipment to insure
that we meet our pledge to you... "We
Service What We Sell".
For repair service:
Call 1-800-4-Repair
(1-800-473-7247)
HOW TO ORDER REPAIR
PARTS
Now that you have purchased your TV
combination, should a need ever exist
for repair parts to service, simply con-
tact any Sears Service Center or Sears,
Roebuck and Co store. Be sure to pro-
vide all pertinent facts when you call or
visit.
The Model Number will be found on
the rear of cabinet. Always mention the
Model Number when requesting ser-
vice or repair parts for your TV com-
bination.
WHEN ORDERING REPAIR PARTS,
ALWAYS GIVE THE FOLLOWING IN-
FORMATION:
1. NAME of ITEM...sears TV combina-
tion
2. MODEL NUMBER
3. PART DESCRIPTION
For replacement parts information and
ordering:
Call 1-800-FON-Part
(1-800-366-7278)
0EMN00695
3. ANTENNA CONNECTIONS
Printed in Malaysia
L7878UJ _r _r_r_r
"--7 ..........
OWNER'S
MANUAL
934.4_3_3_08390
SEARS 19" COLOR
TELEVISION
Record the Model Number and
Serial Number of your TV. The
Model Number and the Serial num-
ber are on the rear panel.
Model No.
Serial No.
Keep these numbers for future use.
TABLE OF CONTENTS
1. FEATURES
2. PRECAUTION
3. ANTENNA CONNECTIONS
4. CLOSED CAPTION
5. BASIC TV OPERATION
6. CHANNEL CHART
7. SETUP MENU FUNCTION
8. REMOTE CONTROL OPERATION
9. MAINTENANCE
10. SPECIFICATIONS
11. TROUBLESHOOTING GUIDE
1. FEATURES
l-i?t l' IL_
Tinted, Bright Black Matrix Picture
tube
181 channel selection-All VHF/UHF
channels plus up to 125 cable channels.
• PLL Frequency Synthesized Tuning-
The latest PLL frequency synthesized
electronic tuning system provides free
and easy channel selection, and lets you
tune directly to any channel using the
10-key push buttons on the remote con-
trol.
• On-Screen function display.
• Full-Function Remote Control
• Sleep timer
• CCS (Closed Caption System)- You
may view specially labeled (cc) TV
programs, movies, news, prerecorded
tapes, etc. with either a dialogue caption
or text display added to the program.
• MTS (Multi-channel Television
Sound)-. Capable to receive stereo TV
program and a Second Audio Program
(SAP) for bilingual, information and in-
struction programs.
2. PRECAUTION
• Place your TV in a room with adequate
ventilation.
• Keep your TV set away from sources of
direct heat, such as heat registers or
direct sunlight.
• Do not place your TV on soft surfaces,
such as rugs or blankets.
• Leave enough room for air to circulate
around the bottom, top and back of the
set.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS SYMBOL INDICATES -[HAT
DANGEROUS VOLTAGE
CONSTITUTING ARISKOFELECTRIC
SHOCK IS PRESENT WITHIN THIS
UNIT.
THIS SYMBOL INDICATES THAT
THERE ARE IMPORTANT
OPERATING AND MAINTENANCE
INSTRUCTIONS INTHE LITERATURE
ACCOMPANYINGTHE APPLIANCE.
The important note is located on the rear of the cabinet.
"IMPORTANT SAFEGUARDS"
1. Read instructions-All the safety and operating
instructions should be read before the appliance
is operated.
2. Retain Instructions-The safety and operating in-
structions should be retained for future refer-
ence.
3. Heed Warnings-All warnings on the appliance
and in the operating instructions should be ad-
hered to.
4. Follow Instructions-All operating and use in-
structions should be followed.
5. Cleaning-Unplug TV from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for
uninterrupted service and that for some specific
reason, such as the possibility of the loss of an
authorization code for a CATV converter, is not
intended to be unplugged by the user for clean-
ing or any other purpose, may exclude the refer-
ence to unplugging the appliance in the cleaning
description otherwise required in item 5.
6. Attachments-D° n°t use attachments n°t rec°m-
mended by the TV manufacturer as they may
cause hazards.
7. Water and Moisture-Do not .use this TV near
water-for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement,
or near aswimming pool, and the like.
8. Accessories-Do not place this TV on an unstable
cart, stand, tripod, bracket, or _,*_LEO.........
table. The TV may fall, causing
serious injury to someone, and
serious damage to the ap-
pliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufac-
turer, or sold with the TV. Any mounting of the
appliance should follow the manufacturer's in-
structions and should use a mounting accessory
recommended by the manufacturer. An ap-
pliance and cart combination should be moved
with care. Quick stops, excessive force, and un-
even surfaces may cause the appliance and cart
combination to overturn.
9. Ventilation-Slots and openings in the cabinet
and the back or bottom are provided for ventila-
tion and to ensure reliable operation of the TV
and to protect it from overheating, these open-
ings must not be blocked or covered. The open-
ings should never be blocked by placing the TV
on a bed, sofa, rug, or other similar surface. This
TV should never be placed near or over a
radiator or heat register. This TV should not be
placed in a built-in installation such as a book-
case or rack unless proper ventilation is
provided or the manufacturer's instructions
have been adhered to.
10. Power Sources-This TV should be operated oniy
from the type of power source indicated on the
marking label. If you are not sure of the type of
power supply to your home, consult your ap-
pliance dealer or local power company. For TVs
intended to operate from battery power, or other
sources, refer to the operating instructions.
11. Grounding or Polarization-This TV is equipped
with a polarized alternating-current line plug(a
plug having one blade wider than the other).
This plug will fit into the power outlet only one
way. This is a safety feature. Ifyou are unable to
5. BASIC TV OPERATION
FIGUHE A
I:XAMPLE OF AN'IENNA GROUNDING AS PLN
NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
$2898A
insert the plug tully into the outlet, try reversing
the plug. Ifthe plug should still fail to fit, contact
you electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized
plug.
12. Power-Cord Protection-Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to
cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
13. Outdoor Antenna grounding-lf an outside an-
tenna or cable system is connected to the TV, be
sure the antenna or cable system is grounded so
as to provide some protection against voltage
surges and built-up static charg;es. Section 810 of
the National Electrical Code, ANSI/NFPA No.
70-1984, provides information, with respect to
proper grounding of the mast: and supporting
structure, grounding of the _ead-in wire to an
antenna discharge unit, size of grounding con-
ductors, location ofantenna-discharge unit, con-
nection to grounding electrodes, and
requirements for the grounding electrode. (Fig.
A)
14. Lightning-For added protection for this TV
receiver during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and discon-
nect the antenna or cable system. This will
prevent damage to the TV due to lightning and
power-line surges.
15. Power Lines-An outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light of power circuits, or
where itcan fall into such power lines or circuits.
When installing an outside antenna system, ex-
treme care should be taken to keep from touch-
ing such power lines or circuits as contact with
them might be fatal.
16. Overloading-Do not overload wall outlets and
extension cords as this can restult in a risk of fire
or electric shock.
6. CHANNEL CHART
(NEC SEC1DON 81{) 21)
GROUND CLAMPS
17. Object and Liquid Entry-Neve_ pupil objects
any kind into this TV through opening as th_
may touch dangerous voltage points or shorto
parts that could result in a fire or electric shoc
Never spill liquid of any kind on the TV.
18. Servicing-Do not attempt to service this _i
yourself as opening or removing covers m_
expose you to dangerous voltage or oth
hazards. Refer all servicing to qualified servi
personnel.
19. Damage Requiring Service-Unplug this TV fro
the wall outlet and refer servicing to qualifi{
service personnel under the following cone
tions:
a. When the power supply cord or plug
damaged or trayed.
b. If liquid has been spilled, or objects have faih
into the TV.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by followil
the operating instructions. Adjust only tho
controls that are covered by the operating i
structions as improper adjustment of other co:
trols may result in damage and will often requi
extensive work by a qualified technician to r
store the TV to its normal operation.
e. If the TV has been dropped or the cabinet h
been damaged.
f. When the TV exhibits a distinct change in p_
formance-this indicates a need for service.
20. Replacement Parts-When replacement parts a
required, be sure the service technician had us,
replacement parts specified by the manufactu r
that have the same characteristics as the origh_
part. Unauthorized substitutions may result
fire, electric shock, injury to persons or oth
hazards.
21. Safety Check-Upon completion of any service
repairs to this TV, ask the service technician
perform routine safety checks to determine tl-
the TV is in proper operating condition.
Before plugging the telescopic monopole
antenna into antenna terminal, check that
the pin is not bent. If it is bent, straighten
the pin as illustrated, then plug the pin
into antenna terminal.
Bentpin
(Needs to be straightened) (Straight pin)
UHF Antenna
VHF/UHF
Combination Antenna
4. CLOSED CAPTION
VHF antenna
_?--OFI
(Not supplied)
UHFNHF i
Rod Antenna I
(accesso?)_
CATV Box*
(Not supplied)
OUT N
75-ohm
Coaxial Cable
*Some cable TV systems use scrambled signals
and require a special converter to receive these
channels. Consult your local cable company.
From Cable System
75-ohm
Coaxial Cable
From Cable System
Note to CATV system installer
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building as close to the point of cable entry as practical.
[olE_ Jt
This TV can receive channels 1 and 2 (C1 and C2) of
Caption and Text on Field 1 (Line 21).
You may watch dramas, movies and news etc. with
captioning the dialogues and the contents of news if
you want by choosing the caption mode.
You may watch full screen text information ifyou
want by choosing the text mode.
You may get these captions or text inlt,'mation by
selecting either C1 or C2. C2, when used, will usually
be for a second language.
NOTES:
(1)Not all programs are broadcast with closed captions.
(2)When your TV receives a special effects playback
signal (i.e., Search, Slow, Still) from a VCR's video
output CHANNEL (CH3 or CH4), your TV may not
display the correct caption or text.
(3)Captions and texts may not match the TV voice exact-
ly.
(4)Interference may cause the closed caption system not
to function properly.
(5)This TV cannot show captions and texts when an OSD
is displayed.
(6)If you press the Display button on the remote control
or the POWER button on the TV for 5 seconds, the TV
will start an automatic Demonstration. It can be can-
celed by turning off the TV.
(7)Your television is designed to provide error free
closed captions from high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause captions
errors are listed below;
a) Automobile ignition noise
b) Electric motor brush noise
c) Weak snowy picture
d) Multiplex signal reception displaying picture ghosts
or airplane flutter
e) Playback of poorly recorded or worn VCR tapes.
f) Still mode or slow motion playback.
LL
CHANNEL + • ( STEREO SAP POWER
POWER
Press to turn TV power ON and OFE
CHANNEL • / •
Press to select the desired channel using the CHANNEL • or • buttons.
VOLUME • / •
Press to adjust the volume to desired listening level using the VOLUME • or • but-
tons.
SETUP
Press to select picture adjustment controls for a natural looking image.
Also, used to preset or change a preset channel.
(See "SETUP MENU FUNCTION")
Remote control unit
(UREMT28MM002)
Batteries ("AA" x 2)
Hod Anlut __a
(OEMN00673)
The two charts below describe the cham_els, CH 1through CH 125 you can receive.
Select either TV/CATV mode by using the setup function.
• TV MODE
SELECTED CHANNEL
INDICATION
CHANNEL BAND
DESIGNATIONS
CHANNEL RECEIVED
OFF THE AIR
2-13
VHF
2-13
14 - 69
UHF
14 - 69
• CATV MODE
SELECTED
CHANNEL
INDICATION
2-13
14 - 36
37 - 65
95 - 99
66 - 94
1
100-125
CHANNEL BAND
DESIGNATION
BROADCAST VHF
CATV MID/SUPER BANDS
CATV HYPER BAND
CATV LOW BAND
ULTRA BAND
SPECIAL CATV CHANNEL
ULTRA BAND
CATV CHANNEL RECEIVED
FROM CABLE
2-13
A-W
W+I - W+29
A-5 - A-1
W+30 - W+58
5A(between 4 and 5)
W+59~W+84
Notes:
• CATV channel designations are not standardized like broadcast channels, so Cha
nel Band Designations at a selected channel may change according to the cat
service.
• Consult your local cable TV company to find out which of these channels
receivable and which type of cable system is used in your area.
• Memorized channels may be lost if the TELEVISION is disconnected from the /
outlet or if a power faikure occurs.
7. SETUP MENU FUNCTION
For each function you wish to change (CAPTION/TEXT, C1/C2, TV/CATV, AU_[OMEMO, ADD/CLEAR, etc.) press tile SETUP button
Note:
If you pass the feature you wish, just press the SETUP button repeatedly and the feature will appear again.
To preset a channel or to change a preset
_hannel, follow the procedure below.
__nect the power cord to a standard
AC outlet.
r_s the POWER button to oN] _ : • -';'_
Channel "2" displays in LIGHT RED.
Press the SETUP button repeatedly
_til you see TV/CATV appearing at
tlae bottom of the screen.
TV/CATV
Press the VOLUME • if you have an
_ Antenna connected to the "IV.
Press the VOLUME vif you have
CABLE TVconnected to the TV.
_e:mode selected will light up in
LIGHT RED.
_MEMO
Press the VOLUME • to start automat-
ic channel memorizing.
When AUTOMEMO action is com-
pleted, the starting channel reappears
on the screen.
ADD/CLEAR
I_se the CHANNEL • and • buttons to
gLSlectthe channel you wish to put into
memory or to erase from memory.
• "Press the VOLUME • button if you
wish to add the channel into memory.
Displayed channel number will
Change to LIGHT BLUE and is now in
memory.
Press the VOLUME • button if you
wish to erase the channel from
memory. Displayed channel number
will change to LIGHT RED and is not
in memory.
you need to add or erase other chan-
_ls, press the CHANNEL • and • but-
_s again to select the channel. Then,
L_ntinue the above operation.
You may view specially labeled (cc) TV
programs, movies, news, prerecorded
tapes, etc. with either a dialogue cap-
tion or text display added to the pro-
gram,
PRESS
SET UP
PRESS
SET UP
PRESS
SET UP
ADD/CLEAR
ION ADD/CLR 2 [+]
LR ADDj
PRESS f
SET UP AUTOMEMO
AUTO MEMO [+]
_! PRESS
SETUP
l [8] goODNTRHABS;uij[_ ]
['] BRIGHT 0U[_-I
08BOO[ |O[JO
Select the CAPTION, TEXT or CCS OFF
mode you wish with the SETUP and
the VOLUME • or • buttons. Se
The mode selected will light up in wi
LIGHT RED. wi
PRESS VOLUME • C
--_PRESS SET UP A
CONTRAST
PRESS
SET UP
BRIGHTNESS
PRESS
SET UP
COLOR
PRESS
SET UP
TINT
PRESS TV/CATV
SET UP PRESS
/ SET UP
i'] DISPLAY [+1
OFF...... o_/
i'] TWCATV
CATV TV
PRESS
SET UP
DISPLAY
Note:
When you disconne
if you have a power
nel program, sleep t
repeat each preset p
menu function.
ote:
When you press the CHANNEL • and
buttons before selecting
AUTOMEMO, tuner stops at 1st avail-
_le channel.
(SEARCH MODE)
en you press the CHANNEL • and
uttons after selecting AUTOMEMO,
_er stops at the memorized channels
_y.
SKIP MODE)
Main Mode:
If the channel selected broadcasts a stereo TV program, the _'1EREt9 indicatt, wdl light. 51
The set will return to MONO sound when the channel is changed to a station broadcasting
SAP Mode:
If the channel selected broadcasts a Sec6nd Audio Program- SAP, the SAP indicator will lig
channel, such as a second language broadcast is available. Push the MAIN/SAP button on
"SAP" will appear in the bottom of the TV screen and the second audio program will be hea
In the above steps, the display
disappear from the screen
after a few seconds even though
you may not be finished. Press
SETUP repeatedly until the dis-
play returns to the screen.
To return to MAIN mode, push the MAIN/SAP button again. "MAIN" will appear in the bo
audio program will be heard.
NOTES:
.I_ If the channel selected is broadcastirig normal audio, no indicators will light, and the MA
When the TV power on, the TV starts in Main mode.
Press
MAIN/SAP
MAIN
4
Loading...