Sears FREE SPIRIT C249 30045 0 Owner's Manual

OWNER’S MANUAL

MODEL NO.

C 249 30046 0

16216859

FREE SPIRIT

RECUMBENT CYCLE

l Assembly
l Operation
l Trouble –Shooting
l Parts
l Warranty

RETAIN FOR
FUTURE REFERENCE

CAUTION:

You must read and understand this owner’s manual before operating unit

MAGNETIC RECUMBENT CYCLE

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

1

MANUFACTURE’S ONE-YEAR LIMITED WARRANTY

Your FREE SPIRIT cycle is warranted for one year from the date of purchase against
defects in material, when used for the purpose intended, under normal conditions, and
provided it receives proper care. Any part found defective or missing will be sent at no cost
when returned in accordance with the terms of this warranty.

This warranty is not transferable and is extended only to the original owner.
The warranty shall not apply to exercise cycles which are (1) used for commercial or other

income producing purposes, or (2) subject to misuse, neglect, accident or unauthorized
repairs and alterations.

This warranty provided herein is in lieu of all other express warranties. Any implied
warranties, including any implied warranties of merchantability or fitness for particular
purpose, are limited in duration to the first 12 months from the date of purchase. All other
obligations or liabilities, including liability for consequential damages, are hereby excluded.

REPAIR PARTS AND SERVICE

All of the parts for the exercise cycle, shown in figure can be ordered from Maurice Pincoffs
Canada Inc. 6050 DON MURIE STREET, NIAGARA FALLS, ONTARIO L2E 6X8. When
ordering parts, the parts will be sent and billed at the current prices. Prices may be subject
to change without notice. Check or money order must accompany all orders. Standard
hardware items are available at your local hardware store.

To ensure prompt and correct handling of any errors, or to answer any questions, please
call our Toll Free number: 1-888-707-1880, or local number 1-905-353-8955 or fax
1-905-353-8968 or email [e-mail]. Office hours are from 8:30 AM to
5:00 PM Monday to Friday Eastern Standard Time.

Always include the following information when ordering parts

l Model Number
l Name of Each Part
l Part Number of Each Part

TABLE OF CONTENTS

WARRANTY 1 PARTS LIST & DIAGRAM 11-14
SAFETY PRECAUTIONS 2 TROUBLE SHOOTING GUIDE 15
PRE-ASSEMBLY CHECK LIST 3 TRAINING GUIDELINES 16-18
PARTS BAG PACKING LIST 4 STRETCHING 19-20
ASSEMBLY INSTRUCTION 5-8 ORDERING REPLACEMENT PARTS 21
MONITOR INSTRUCTION 9-10 SERVICE AND PARTS 22

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

2

SAFETY PRECAUTIONS

Thank you for purchasing our product. Even though we go to great efforts to ensure the
quality of each product we produce, occasional errors and /or omissions do occur. In any
event should you find this product to have either a defective or a missing part please contact
us for a replacement.
This product has been designed for home use only. Product liability and guarantee
conditions will not be applicable to products being subjected to professional use or products
being used in a gym center.

This exercise equipment was designed and built for optimum safety. However, certain
precautions apply whenever you operate a piece of exercise equipment. Be sure to read the
entire manual before assembly and operation of this machine. Also, please note the
following safety precautions:

1. Read the OWNER’S OPERATING MANUAL and all accompanying literature and
follow it carefully before using your cycle.

2. If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced
while using this equipment, STOP the workout at once. CONSULT A PHYSICIAN
IMMEDIATELY.

3. Inspect your exercise equipment prior to exercising to ensure that all nuts and bolts
are fully tightened before each use.

4. The cycle must be regularly checked for signs of wear and damage. Any part found
defective, must be replaced with a new part from the manufacturer.

5. Fitness equipment must always be installed on a flat surface, do not place the unit on
a loose rug or uneven surface. It is recommended to use an equipment mat to
prevent the unit from moving while it is being used, which could possibly scratch or
damage the surface of your floor.

6. No changes must be made which might compromise the safety of the equipment.

7. Keep children and pets away from this equipment at all times while exercising.

8. It is recommended to have a minimum of 2’ safe clearance around the exercise

equipment while in use.

9.

Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward.

This allows your heart rate to gradually increase and decrease and will help prevent you
from straining muscles.

10. Never hold your breath while exercising. Breathing should remain at a normal rate in

conjunction with the level of exercise being performed

11. Always wear suitable clothing and footwear while exercising. Do not wear loose fitting

clothing that could become entangled with the moving parts of your cycle.

12. Care must be taken when lifting or moving the equipment, so as not to injure your back.

Always use proper lifting techniques.

13. User weight should not exceed 250 lbs.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE
OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. WE ASSUME NO
RESPONSILITY FOR PEROSNAL INJURY OR PROPERTY DAMAGE SUSTAINED BY
OR THROUGH THE USE OF THIS PRODUCT.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

3

PRE-ASSEMBLY CHECK LIST

LIST DESCRIPTION Q’TY

70 Main frame 1
83 Front stabilizer w/ transportation wheels 1
82 Rear stabilizer w/ adjustable end cap 1
39 Seat 1
79 Monitor 1

10R/L Handlebar w/pulse (L&R) 2

40 Back cushion 1
16 Seat support tube 1

75 Upright post 1
Instruction Manual 1
Hardware pack 1

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

4

PARTS BAG PACKING LIST

PART DESCRIPTION Q’TY

SKETCH

4 Carriage bolt M8*75mm

4

5 Cap nut M8 4

4

5

6 Spring washer M8 10
7 Curve washer M8 10

6

7

17 Hex bolt M10*135mm 2
18 Curve washer M10 4

17

18

19 Spring washer M10 2
20 Nylon nut M10 2

19

20

64R Pedal (right) 1
64L Pedal (left) 1

64R

64L

65R Pedal strap (right) 1
65L Pedal strap (left) 1

65R

65L

63 Spacer 2
80 Allen bolt M8*20mm 6

63

80

84 Allen wrench 1
85 Universal wrench 1

84

85

1 Adaptor w/cable 1

1

Above described parts are all the parts you need to assemble this machine. Before
you start to assemble, please check the hardware packing to make sure they are
included.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

5

ASSEMBLY INSTRUCTION

This manual is designed to help you easily assemble, adjust and use this machine. Please
read this manual carefully. For the sake of familiarizing yourself with the parts identified in
the instruction, first study the overview drawing.

Set all parts in a clear area on the floor and remove the packing material. Refer to the parts
list for help to identify the parts.

It will take two people to assemble this unit.

STEP 1. ATTACHING THE STABILIZERS

n Attach the front stabilizer (83) with transportation wheels (66) to the front frame (70)

using two carriage bolts M8*75mm (4), two curve washers M8 (7), two spring washers
M8 (6) and two cap nuts M8 (5).

n Attach the rear stabilizer (82) with adjustable end caps (2) to the rear frame (15) using

two carriage bolts M8*75mm (4), two curve washers M8 (7), two spring washers M8 (6)
and two cap nuts M8 (5).

Adjusting the length of your bike:

Remove the seat adjustment knob (36). Slide the rear frame (15) into the front frame
(70) to your desired location and secure with the adjustment knob (36).

NOTE: Ensure the bolts are fastened securely to avoid injuries.
If the unit is wobbly use the leveling caps on the rear stabilizer to level the unit.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

6

STEP 2. ATTACHING THE SEAT SUPPORT TUBE AND HANDLEBARS

n Insert the seat support tube (16) into the rear frame (15). Secure using six allen head

bolts (80), six spring washers (6) and six curved washers (7).

n Secure the right handlebar (10R) and the left handlebar (10L) to the right and left side

of the seat support tube (16) using two hex head bolts M10*135mm (17), four curved
washers M10 (18), two spring washers (19) and two nylon nuts (20).

n Insert the handpulse wire (72) into the pulse jack (30) found on the rear frame (15).
NOTE: Ensure the bolts are fastened securely to avoid injuries.

STEP 3. ATTACHING THE SEAT AND BACK CUSHION

n Attach the seat (39) to the seat support tube (16). Align the four holes and fasten with

four cross head bolts (37) found underneath the seat.

n Attach the back cushion (40) to the backrest of the seat support tube (16). Align the

two holes and fasten with two cross head bolts M6*35mm (41) found underneath the
back cushion.

NOTE: Ensure the bolts are fastened securely to avoid injuries.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

7

STEP 4. ATTACHING THE UPRIGHT POST

n Connect the extension handpulse wire (31) into the upper handpulse wire (76).
n Connect the sensor wire (67) into the extension sensor wire (77).
n Connect the gear box w/wire (56) into the extension monitor wire (78).
n Connect the power wire (86) to the extension power wire (87).
n Insert the upright post (75) into the front frame (70). Secure using four cross head bolt

M6x15mm (71) and four curved washers M6 (69) that are pre-assembled on the front
frame (70).

NOTE: Ensure the bolts are fastened securely to avoid injuries.

56

STEP 5. ATTACHING THE PEDALS

n Attach the right and left pedal

straps (65R / 65L) to the right
and left pedals (64R / 64L).
Note: The end with four
adjustable holes must be set
outwards.

n Attach the left pedal (64L) and

spacer (63) to the left crank
arm (58L). Repeat for
the right pedal (64R).

Note: The right pedal “R” should be threaded on clockwise. The left pedal “L” should be
threaded on counter-clockwise.

It is important to assemble the correct pedal to the correct side of the crank arm to
avoid cross-threading and damaging the pedal.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

8

STEP 6. ATTACH THE MONITOR

n Connect the upper handpulse wire (76) into the back of the monitor (79).
n Connect the extension sensor wire (77) into the back of the monitor (79).
n Connect the extension monitor wire (78) into the back of the monitor (79).
n Connect the extension power wire (87) to the back of the monitor (79).
n Slide the monitor (79) onto the bracket of the upright post (75).

Note: Before securing the monitor onto the monitor bracket of the handlebar post, please
ensure all wires are safely tucked inside the opening of the handlebar post. This will
ensure that the monitor slides on easily and avoids pinching the wires.

Your unit comes with an adaptor.
Plug the adaptor cable (1)
into the front of the main frame.

Your unit is now fully assembled.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

9

MONITOR INSTRUCTION

KEY GUIDE
FUNCTION BUTTON

MODE: Press to select between speed/rpm and calorie/watt
ENTER: Press to preset the target value of time and age
RESET: Press to reset all values to zero

▲(UP)： Press to increase the tension level
Press to select a program
Press to set the target value of time and age
▼(DOWN): Press to decrease the tension level
Press to select a program
Press to set the target value of time and age

START/STOP Press to begin or end your exercise program.
FUNCTIONS
Time: Shows your elapsed workout time up to 99:59

Counts down from your preset target time to 00:00 during your workout

Speed: Displays the current speed up to 99.9 km
RPM: Displays the current rotation per minute.
Distance: Displays the cumulative distance traveled during your workout up to

99.9KM

Calorie/ Displays the cumulative calories burned at any given time during your

workout.

Watt Displays current watt figures.

Note: This is a rough guide used for comparison of different exercise
sessions, which cannot be used for medical purposes

Gripped pulse: The monitor will display the user’s current heart rate in beats per

minute during the workout. Both hands must hold the gripped pulse for
a heart rate reading during your workout.

Note: This data is a rough guide used for comparison of different

exercise sessions, which cannot be used for medical purposes.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

10

Program: Displays the program level from P1 to P12.

P1 –Manual you can control the tension level by pressing the P2 to P10
programs are preset at the factory. P11and P12 are hart rate control
programs. The monitor automatically adjust the workout resistance
according to your heart rate.

Monitor function

Program 1 to Program 10
Press the up or down key to choose your program (P1-P10).
Press E to accept the program.
Press the up or down key to set your time.
Press E to accept your preset time.
Press S to start your exercise program.

Program 11-program12
P11 is 60% of your target heart rate.
P12 is 85% of your target heart rate.

Press the up or down key to choose the program p11 or p12.
Press E to accept the program.
Press the up or down key to set your time.
Press E to accept your preset time.
Press the up or down key to set your age.
Press the E to accept your age.
Press S to start your exercise program.

Remarks

1. The monitor will turn on automatically by pressing any key or when your start to pedal.

The monitor will shut off automatically if no signal is detected for four minutes and will
keep all function values. You may press S or start to pedal to have the computer
resume.

2. Press the reset button for four seconds to reset all values to zero

3. When you preset your time, the computer will divide the time by 10 regular intervals

for your programs.

4. You can increase or decrease your tension while in programs P1 to P10.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

11

PART LIST

KEY NO.

PART NO. DESCRIPTION Q’TY

1

85901

Adaptor w/cable 1

2

85902

Rear stabilizer end cap 2

3

85903

Machine screw M4*12mm 16
4 85904 Carriage bolt M8*75mm 4
5 85905 Cap nut M8 4
6 8590 Spring washer M8mm 10
7 85907 Curve washer M8mm 10
8 85908 Foam grip 2
9 85909 Hand pulse sensor 2

10R 85910R

Handlebar right

1

10L 85910L Handlebar left 1

11 85911 Plastic end cap 1’ 2
12 85912 Plastic end cap 1’ 2
13 85913 Machine screw M4*15mm 12

14R 85914R Back chain cover right 1

14L 85914L Back chain cover left 1

15 85915 Rear frame 1
16 85916 Seat support tube 1
17 85917 Hex bolt M10*135mm 2
18 85918 Curve washer M10 4
19 85919 Spring washer M10 2
20 85920 Nylon locknut M10 2

21R 82921R Front chain cover right 1

21L 85921L Front chain cover left 1

22 85922 Machine screw M5*25mm 6
23 85923 Nut 3/8’*7mm 3
24 85924 Nut 3/8’*4mm 1
25 85925 Belt adjuster M6*50mm 2
26 85926 Chain cover protector 2
27 85927 C clip 26mm 1
28 85928 Mag. Flywheel system 1
29 85929 Plastic sleeve 2

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

12

KEY NO.

PART NO. DESCRIPTION Q’TY

30 85930 Hand pulse jack w/wire 1
31 85931 Extension hand pulse wire 1
32 85932 Plastic sleeve 1
34 85934 Machine screw M4*8mm 2
35 85935 Fixed bracket 1
36 85936 Seat adjustable knob 1
37 85937 Machine screw M6*30mm 4
38 85938 Square end cap 2
39 85939 Seat 1
40 85940 Back cushion 1
41 85941 Machine screw M6*35mm 2
42 85942 V-Belt 1
43 85943 Pulley w/axle 1
44 85944 Magnet 6.5*15mm 1
45 85945 Spring 1
46 85946 Allen head bolt M10*20mm 1
47 85947 Idler wheel bracket 1
48 85948 Flat washer 22*10.2*1.0mm 1
49 85949 Nylon nut M10*7mm 2
50 85950 Idler wheel 1
51 85951 Allen head bolt M10*40mm 1
52 85952 Bearing 1
53 85953 Spacer 15*10*15mm 1
54 85954 Bearing 2
55 85955 Spring clip 2
56 85956 Gear box w/ wire 1
57 85957 Flat washer 1

58R 85958R Crank right 1

58L 85958L Crank left 1

59 85959 Anti slippery nut right thread M8*20mm 2
60 85960 Crank bracket 2
61 85961 Crank cover 2
62 85962 Crank cap 2

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

13

KEY NO.

PART NO. DESCRIPTION Q’TY

63 85963 Spacer 18*13*10mm 2

64R 85964R Pedal right 1

64L 85964L Pedal left 1

65R 85965R Pedal strap right 1

65L 85965L Pedal strap left 1

66 85966 transportation wheel 2
67 85967 Sensor w/wire 1
68 85968 Machine screw M5*15mm 3
69 85969 Curve washer M6 4
70 85970 Front frame 1
71 85971 Cross head screw M6*15mm 4
72 85972 Hand pulse wire 1
73 85973 Plug 2
74 85974 Decoration strap 1
75 85975 Upright post 1
76 85976 Upper hand pulse wire 1
77 85977 Extension sensor wire 1
78 85978 Extension monitor wire 1
79 85979 Monitor 1
80 85980 Allen head bolt M8*20mm 6
81 85981 Flat washer M6 10
82 85982 Rear stabilizer 1
83 85983 Front stabilizer 1
84 84984 Allen wrench 6mm 1
85 85985 Universal wrench 1
86 85986 Power cable 1
87 85987 Extension power cable 1
88 85988 Nut 1

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

14

DIAGRAM

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

15

TROUBLE SHOOTING GUIDE

Problem Cause Correction

Monitor does not
display

Adaptor not plug in Plug in adaptor

No speed or distance
displays on the
monitor

Gear box not connecting
properly

Securely plug sending unit into
extension wire and the back of the
monitor

Sending unit not working

properly

Replace sending unit

Monitor not working properly Replace monitor
No tension Tension control cable not

connected

Securely plug tension control cable
into the extension tension control
cable

Magnetic wheel not working

properly

Replace magnetic wheel

Heart rate not
displaying

Pulse wire not connected
not connected

Securely plug wires into the back of

the monitor
Hand pulse defective Replace hand pulse grip or ear clip
Monitor not working properly Replace monitor
Grinding Crank bearing defective Replace crank bearings
Idler pulley defective Replace idler pulley
Mag wheel defective Replace magnetic wheel
Squealing V-belt slipping Adjust v-belt

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

16

TRAINING GUIDELINES

Exercise

Exercise is one of the most important factors in the overall health of an individual. Listed
among its benefits are:

ž Increased capacity for physical work (strength endurance)
ž Increased cardiovascular (heart and arteries/veins) and respiratory efficiency
ž Decreased risk of coronary heart disease
ž Changes in body metabolism, e.g. losing weight
ž Delaying the physiological effects of age
ž Physiological effects, e.g. reduction in stress, increase in self-confidence, etc.

Basic Components of Physical Fitness

ž There are four all encompassing components of physical fitness and we need to briefly

define each and clarify its role.

ž Strength is the capacity of a muscle to exert a force against resistance. Strength

contributes to power and speed and is of great importance to a majority of sports
people.

ž Muscular Endurance is the capacity to exert a force repeatedly over a period of time,

e.g. it is the capacity of your legs to carry you 10 Km without stopping.

ž Flexibility is the range of motion about a joint. Improving flexibility involves the

stretching of muscles and tendons to maintain or increase suppleness, and
provides increased resistance to muscle injury or soreness.

ž Cardio-Respiratory Endurance is the most essential component of physical fitness.

It is the efficient functioning of the heart and lungs

Aerobic Fitness

The largest amount of oxygen that you can use per minute during exercise is called your
maximum oxygen uptake (MVo2). This is often referred to as your aerobic capacity.

The effort that you can exert over a prolonged period of time is limited by your ability to
deliver oxygen to the working muscles. Regular vigorous exercise produces a training effect
that can increase your aerobic capacity by as much as 20 to 30%. An increased MVO2
indicates an increased ability of the heart to pump blood, of the lungs to ventilate oxygen
and of the muscles to take up oxygen.

Anaerobic Training

This means “without oxygen” and is the output of energy when the oxygen supply is
insufficient to meet the body’s long term energy demands. (For example, 100 meter sprint).

The Training Threshold

This is the minimum level of exercise which is required to produce significant improvements
in any physical fitness parameter.

Progression

As your become fitter, a higher intensity of exercise is required to create an overload and
therefore provide continued improvement

Overload

This is where you exercise at a level above that which can be carried out comfortably. The
intensity, duration and frequency of exercise should be above the training threshold and
should be gradually increased as the body adapts to the increasing demands. As your
fitness level improves, so the training threshold should be raised.
Working through your program and gradually increasing the overload factor is important.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

17

Specificity

Different forms of exercise produce different results. The type of exercise that is carried out
is specific both to the muscle groups being used and to the energy source involved.
There is little transfer of the effects of exercise, i.e. from strength training to cardiovascular
fitness. That is why it is important to have an exercise program tailored to your specific
needs.

Reversibility

If you stop exercising or do not do your program often enough, you will lose the benefits you
have gained. Regular workouts are the key to success.

Warm Up

Every exercise program should start with a warm up where the body is prepared for the
effort to come. It should be gentle and preferably use the muscles to be involved later.
Stretching should be included in both your warm up and cool down, and should be
performed after 3-5 minutes of low intensity aerobic activity or callisthenic type exercise.

Warm Up or Cool Down

This involves a gradual decrease in the intensity of the exercise session. Following exercise,
a large supply of blood remains in the working muscles. If it is not returned promptly to the
central circulation, pooling of blood may occur in the muscles

Heart Rate

As you exercise, so the rate at which your heart beat also increases. This is often used as a
measure of the required intensity of exercise. You need to exercise hard enough to
condition your circulatory system, and increase your pulse rate, but not enough to strain
your heart.

Your initial level of fitness is important in developing an exercise program for you. If you are
starting off, you can get a good training effect with a heart rate of 110-120 beats per
minute(BPM). If you are fitter, you will need a higher threshold of stimulation.

To begin with, you should exercise at a level that elevates your heart rate to about 65 to
70% of your maximum. If you find this is too easy, you may want to increase it, but it is
better to lean on the conservative side.

As a rule of thumb, the maximum heart rate is 220 minus your age. As you increase in age,
so your heart, like other muscles, loses some of its efficiency. Some of its natural loss is won
back as fitness improves.

The following table is a guide to those who are “starting fitness”.
Age 25 30 35 40 45 50 55 60 65

Target heart Rate
10Second Count 23 22 22 21 20 19 19 18 18
Beats per Minute 138 132 132 126 120 114 114 108 108

Pulse Count

The pulse count(on your wrist or carotid artery in the neck, taken with two index fingers)is
done for ten seconds, taken a few seconds after you stop exercising. This is for two reasons:
(a) 10 seconds is long enough for accuracy, (b) the pulse count is to approximate your BPM
rate at the time you are exercising. Since heart rate slows as you recover, a longer count
isn’t as accurate.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

18

The target is not a magic number, but a general guide. If you’re above average fitness, you
may work quite comfortably a little above that suggested for your age group.

The following table is a guide to those who are keeping fit. Here we are working at about
80% of maximum.

Age 25 30 35 40 45 50 55 60 65
Target heart Rate
10Second Count 23 22 22 21 20 19 19 18 18
Beats per Minute 138 132 132 126 120 114 114 108 108

Don’t push yourself too hard to reach the figures on this table. It can be very uncomfortable
if you overdo it. Let it happen naturally as you work through your program. Remember, the
target is a guide, not a rule, a little above or below is just fine.

Two final comments:(1) don’t be concerned with day to day variations in your pulse rate,
being under pressure or not enough sleep can affect it;(2) your pulse rate is a guide, don’t
become a slave to it.

Muscle Soreness

For the first week or so, this may be the only indication you have that you are on an exercise
program. This, of course, does depend on your overall fitness level. A confirmation that you
are on the correct program is a very slight soreness in most major muscle groups. This is
quite normal and will disappear in a matter of days.

If you experience major discomfort, you may be on a program that is too advanced or you
have increased your program too rapidly.
If you experience PAIN during or after exercise, your body is telling your something.
Stop exercising and consult your doctor.

What to Wear

Wear clothing that will not restrict your movement in any way while exercising. Clothes
should be light enough to allow the body to cool. Excessive clothing that causes you to
perspire more than you normally would while exercising, gives you no advantage. The extra
weight you lose is body fluid and will be replaced with the next glass of water you drink. It is
advisable to wear a pair of gym or running shoes or “sneakers”.

Breathing during Exercise

Do not hold your breath while exercising. Breathe normally as much as possible. Remember,
breathing involves the intake and distribution of oxygen, which feeds the working muscles.

Rest periods

Once you start your exercise program, you should continue through to the end. Do not
break off halfway through and then restart at the same place later on without going through
the warm-up stage again.

The rest period required between strength training exercises may vary from person to
person. This will depend mostly on your level of fitness and the program you have chosen.
Rest between exercises by all means, but do not allow this to exceed two minutes. Most
people manage with half minute to one minute rest periods

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

19

STRETCHING

Stretching should be included in both your warm up and cool down, and should be
performed after 3-5 minutes of low intensity aerobic activity or callisthenic type exercise.
Movements should be performed slowly and smoothly, with no bouncing or jerking. Move
into the stretch until slight tension, not pain, is felt in the muscle and hold for 20-30 seconds.
Breathing should be slow, rhythmical and under control, making sure never to hold your
breath.

HEAD ROLLS SHOULDER LIFTS

Rotate your head to the right for one count, feeling Lift your right shoulder up toward your ear
the stretch up the left side of your neck. Next rotate for one count. Then lift your left shoulder
your head back for one count, stretching your chin to up for one count as you lower your right
the ceiling and letting your mouth open. Rotate your shoulder.
head to the left for one count, and finally, drop your
head to your chest for one count.

SIDE STRETCHES QUADRICEPS STRETCH

Open your arms to the side and continue lifting With one hand against a wall for balance,
them until they are over your head. Reach your reach behind you and pull your right foot up.
right arm as far upward toward the ceiling as Bring your heel as close to your buttocks as
you can for one count. Feel the stretch up possible. Hold for 15 counts and repeat with
your right side. Repeat this action with your left foot up.
left arm.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

20

INNER THIGH STRETCH TOE TOUCHES

Sit with the soles of your feet together with your Slowly bend forward from your waist, letting
knees pointing outward. Pull your feet as close your back and shoulders relax as you stretch
Into your groin as possible. Gently push your toward your toes. Reach down as far as you
knees towards the floor. Hold for 15 counts. can and hold for 15 counts.

HAMSTRING STRETCHES CALF / ACHILLES STRETCH

Sit with your right leg extended. Rest the sole of Lean against a wall with your left leg in front
your left foot against your right inner thigh. Stretch of the right and your arms forward. Keep Your
toward your toe as far as possible. Hold for 15 right leg straight and the left foot on the floor,
counts. Relax and then repeat with left leg then bend the left leg and lean forward by
extended. moving your hips toward the wall. Hold, then
repeat on the other side for 15 counts.

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

21

OWNER`S

MANUAL

Model No.

C249 30046 0

FREE SPIRIT

RECUMBENT CYCLE

SERVICE

Is at

YOUR

SERVICE

You should record
both model number
and serial number and
keep in a safe place
for future reference.

HOW TO ORDER REPLACEMENT PARTS
The MODEL NUMBER for the CYCLE will be found on the frame
Always mention this MODEL NUMBER when requesting service or
replacement parts for your CYCLE.

All parts listed herein may be ordered through SEARS CANADA
INC.RETAIL OR CATALOG STORES AND SERVICE CENTERS.
If the parts you need are not stocked locally your order will be electronically
transmitted to a SEARS Parts Distribution Center for expedited handling.

When ordering parts by mail, selling prices will be furnished on request or
parts will be shipped at prevailing prices and you will be billed accordingly.

WHEN ORDERING REPLACEMENT PARTS, ALWAYS GIVE THE
FOLLOWING
INFORMATION.

1. PART NUMBER

2. PART DESCRIPTION

3. MODEL NUMBER

4. NAME OF ITEM

Your sears merchandise takes on added value when you discover that Sears
has Service Units throughout the Country. Each is staffed by Sears, Trained
Technicians Sears approved methods.

For assembly helps or missing parts call the factory at 1-888-707-1880

PDF created with pdfFactory trial version www.softwarelabs.com

©2009

22

Get it fixed, at your home or ours!

Just Call:

1-800-4-MY-HOME

®

(1-800-469-4663)

24 hours a day, 7 days a week

For the repair of major brand appliances in your own home …

no matter who made it, no matter who sold it!

For your nearest Sears Parts & Service location,

to bring in products like vacuums, lawn equipment and electronics.

For Sears Parts & Service, to order the replacement parts,

accessories and owner’s manuals that you need to do-it-yourself.

www.sears.ca

___________________________________________________________________________________________

To purchase or inquire about a Sears Maintenance Agreement, call:

1-800-361-6665

9 a.m. – 11 p.m. Mon. – Fri. EST, 9 a.m. – 4 p.m. Sat.

___________________________________________________________________________________________

Pour service en francais:

1-800-LE-FOYER

MC

(1-800-533-6937)

www.sears.ca

®/TM

Trademarks of Sears, Roebuck and Co. used under license by Sears Canada

®

Marque deposé e/

MC

Marque de commerce de Sears, Roebuck and Co. utilisée en vertu d’une licence de Sears Canada

PDF created with pdfFactory trial version www.softwarelabs.com