Sears Fitness gear 821E User Manual

FOR MODEL :

821E

ELLIPTICAL U S E R ’ S GUIDE

IN TRODUCTION

CONGRATULATIONS and THANK YOU for your purchase of this Fitness Gear elliptical!

Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, an Fitness Gear elliptical can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to designing fitness equipment from the inside out, we use only the highest quality components. It's a commitment we back with one of the strongest frame-to-brake warranty packages in the industry.

You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.

Fitness Gear delivers.

TA B L E OF CO N T E NT S

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

Important Precautions

Assembly

Before You Begin

Elliptical Operation

Conditioning Guidelines

Troubleshooting & Maintenance

Limited Warranty

CONTACT INFORMATION

Back Panel

BEFORE YOU BEGIN

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION

WARNING

PRECAUTIONS

IMPORTANT

ASSEMBLY

BEFORE YOU BEGIN

OPERATION

ELLIPTICAL

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

IM PORTA NT PR EC AU TIONS

SAVE THESE INSTRUCTIONS

Read all instructions before using this elliptical. When using an electrical product, basic precautions should always be followed. It is the responsibility of the owner to ensure that all users of this elliptical are adequately informed of all warnings and precautions. If you have any questions after reading this manual, contact Sears at the number listed on the back panel of this manual.

To reduce the risk of burns, fire, electrical shock or injury to persons:

• If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

• Maintain a comfortable pace. Do not sprint above 80 rpms on this machine.

• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.

• Do not wear clothes that might catch on any part of the elliptical.

• Do not turn pedal arms by hand.

• Make sure handlebars are secure before each use.

• Do not insert or drop any object into any opening.

• Unplug elliptical before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)

• This elliptical should not be used by persons weighing more than 250 pounds. Failure to comply will void the warranty.

• This elliptical is intended for in-home use only. Do not use this elliptical in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.

• Do not use elliptical in any location that is not temperature controlled such as but not limited to: garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.

• Use the elliptical only as described in this manual.

• Keep the topside of the foot support clean and dry

• Care should be taken when mounting or dismounting the equipment. Before mounting or dismounting, move the pedal on the mounting or dismounting side to its lowest position and bring the machine to a complete stop.

• Disconnect all power before servicing the equipment.

At NO time should pets or children under the age of 12 be closer to the elliptical than 10 feet. At NO time should children under the age of 12 use the elliptical. Children over the age of 12 should not use the elliptical without adult supervision.

WARRANTY

LIMITED

It is essential that your elliptical is used only indoors, in a climate controlled room. If your elliptical has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

AS SEMBLY

SERIAL NUMBER IS LOCATED UNDER CONSOLE MAST BOOT

WARNING

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

There are several areas during the assembly process of an elliptical that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical, the assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended that you place a protective covering on your floor. During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

A light application of grease may aid in the installation of hardware. Any grease, such as lithium

NOTE:

bike grease is recommended.

Before proceeding, find your elliptical’s serial number located under the console mast boot and enter it in the space provided below. Also locate the model name which is located on the side cover.

ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOxES BELOW:

SERIAL NUMBER :

MODEL NAME:

BEFORE YOU BEGIN

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

* Refer to the SERIAL NUMBER and MODEL NAME when calling for service. * Also enter this serial number on your Warranty Card.

LIMITED

WARRANTY

INTRODUCTION

TRANSPORT WHEEL

LOWER HANDLEBAR

TOOLS INCLUDED

c 5mm Allen Wrench c 4mm Allen Wrench c 13/15mm Flat Wrench c 17mm Flat Wrench

CONSOLE

PARTS INCLUDED

c 1 Console c 1 Console Mast c 1 Console Mast Boot c 1 Stabilizer Tube c 2 Upper Handlebars c 2 Lower Handlebars c 2 Link Arms c 2 Pedal Arms

c 2 Pedal Arm Covers c 2 Guide Rails c 2 Pivoting Foot Pads c 2 Front Handlebar Covers c 2 Rear Handlebar Covers c 1 Power Supply c 7 Hardware Bags

HANDLEBAR COVERS

UPPER HANDLEBAR

STABILIZER TUBE

PEDAL ARM COVER

LINK ARM

PEDAL ARM

If you have questions or if there are any missing parts, Sears guarantees complete satisfaction.

Sears contact information is located on the back panel of this manual.

GUIDE RAIL

ROLLER WHEEL COVERS

PIVOTING FOOTPAD

CONSOLE MAST

CONSOLE MAST BOOT

BOTTLE HOLDER

PRECAUTIONS

IMPORTANT

ASSEMBLYASSEMBLY

BEFORE YOU BEGIN

OPERATION

ELLIPTICAL

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

#0-5"

45"#*-*;&356#&

."*/'3".&

#0-5" NN 2UZ

ASSEMBLY STEP 1

#0-54#

."*/'3".&

#0-5# NN 2UZ

HARDWARE BAG FOR STEP 1 CONTENTS :

A) Open HARDWARE BAG FOR STEP 1.

B) Attach STABILIZER TUBE to the

MAIN FRAME using 2 BOLTS (A).

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

ASSEMBLY S T E P 2

HARDWARE BAG FOR STEP 2 CONTENTS :

A) Open HARDWARE BAG FOR STEP 2.

B) Slide left and right GUIDE RAILS

into MAIN FRAME.

C) Attach GUIDE RAILS using 2

BOLTS (B).

NOTE: You may have to rotate the

guide rails back and forth to get them to slide into the frame.

BEFORE YOU BEGIN

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION

BOLTS (C)

BOLT (B)

MAIN FRAME

NUT (F)

LOCK WASHERS (D)

ARC WASHERS (E)

CONSOLE MAST

CONSOLE MAST BOOT

CONSOLE WIRES

BOLT (B) 70 mm Qty: 1

NUT (F) 13 mm Qty: 1

LOCK WASHER (D) Qty: 3

ARC WASHER (E) Qty: 3

BOLT (C) 15 mm Qty: 3

ASSEMBLY STEP 3

PRECAUTIONS

IMPORTANT

ASSEMBLYASSEMBLY

BEFORE YOU BEGIN

OPERATION

ELLIPTICAL

HARDWARE BAG FOR STEP 3 CONTENTS :

A) Open HARDWARE BAG FOR STEP 3.

B) Slide the CONSOLE MAST BOOT over the bottom of the CONSOLE MAST.

C) Carefully pull console wires through the CONSOLE MAST. Attach the CONSOLE WIRES to the pre-attached

routing wire. Discard wire when finished.

D) Slide CONSOLE MAST into MAIN FRAME.

E) Insert 3 BOLTS (C), 3 LOCK WASHERS (D) and 3 ARC WASHERS (E) into back of CONSOLE MAST.

CONDITIONING

GUIDELINES

F) Attach CONSOLE MAST to MAIN FRAME using BOLT (B) using NUT (F).

G) Slide CONSOLE MAST BOOT down to cover exposed bolts.

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

13&"55"$)&%4$3&84

-08&3 )"/%-&#"3

611&3)"/%-&#"3

4$3&84+

)"/%-&#"3$07&3

$0/40-& ."45

13&"55"$)&% #0-58"4)&3

/05&XBTIFSPOUPQTIPVME CFGBDJOHCMBDLTJEFEPXO

/05&XBTIFSPOCPUUPN TIPVMECFGBDJOHCMBDLTJEFVQ

1&%"-"3.

5&'-0/8"4)&34)

/65(

1&%"-"3.$07&3

4$3&8*

$3"/,"3.

NUT (G) 17 mm Qty: 2

SCREW (I) 25 mm Qty: 2

TEFLON WASHER (H) 25 mm Qty: 4

ASSEMBLY STEP 4

4$3&8+ NN 2UZ

INTRODUCTION

A) Open HARDWARE BAG FOR STEP 4.

HARDWARE BAG FOR STEP 4 CONTENTS :

B) Place TEFLON WASHER (H) over

CRANK ARM followed by PEDAL ARM.

C) Place a second TEFLON WASHER

(H) over PEDAL ARM and attach

using NUT (G).

D) Repeat on other side.

E) Attach PEDAL ARM COVERS to

PEDAL ARMS using SCREWS (I).

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE YOU BEGIN

ASSEMBLY STEP 5

HARDWARE BAG FOR STEP 5 CONTENTS :

A) Open HARDWARE BAG FOR STEP 5.

B) Remove PRE-ATTACHED BOLT &

WASHERS from CONSOLE MAST.

C) Slide LOWER HANDLEBARS onto

CONSOLE MAST and attach by re-inserting PRE-ATTACHED BOLT

& WASHERS.

D) Attach UPPER HANDLEBARS to

LOWER HANDLEBARS using PREATTACHED SCREWS.

D) Attach HANDLEBAR COVERS using

4 SCREWS (J).

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

+ 19 hidden pages

Sears Fitness gear 821E User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual