Sears DT1000, 831.288261 User Manual

USER'S MANUAL

Patent Pending

CAUTION

Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference.

Model No. 831.288261 Serial No. _

Write the serial number in the space above for future reference.

Serial

Number

Decal

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

HOW TO USE THE LIFESTYLER¨DT1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

1. It is the responsibility of the owner to ensure that all users of the DT1000 are adequately informed of all warnings and precautions.

2. Read all instructions in this manual before using the DT1000. Use the DT1000 only as described.

3. Place the DT1000 on a level surface. Cover the floor beneath the DT1000 to protect the floor or carpet.

4. Inspect and tighten all parts regularly. Make sure that the chain is properly adjusted (see MAINTENANCE AND TROUBLE-SHOOTING on page 8). Replace any worn parts immediately.

5. Keep children under age 12 and pets away from the DT1000 at all times.

6. The DT1000 should not be used by persons weighing more than 250 pounds.

7. Keep hands and feet away from the link arms and other moving parts.

8. Do not wear loose clothing that could become caught on the DT1000. Always wear athletic shoes for foot protection.

9. When adjusting the seat, insert the seat knob through one of the holes in the seat post (see the drawing on page 3). Do not insert the seat knob under the seat post.

10. If you feel faint, dizzy, or short of breath while exercising, stop immediately and begin cooling down.

11. The DT1000 is intended for home use only. Do not use the DT1000 in any commercial, rental, or institutional setting.

12. The decal shown below has been placed on the DT1000. If the decal is missing, or if it is not legible, please call our toll-free HELPLINE to order a free replacement decal (see the back cover of this manual). Apply the decal in the location shown.

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before using the LIFESTYLER¨DT1000.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. SEARS assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

Do not allow children on or around machine.

Keep hands and feet away from moving parts and contact points.

Read owner's manual and follow instructions.

BEFORE YOU BEGIN

Pedal

Side Shield

Link Arm

Adjustable Cap

Electronic Monitor

Water Bottle Holder (Bottle not included)

Towel Holder

Handlebar

Seat Knob

Seat

Seat Post

Frame

Thank you for selecting the innovative LIFESTYLER

DT1000. The DT1000 blends advanced engineering with contemporary styling to provide you with a lowimpact, total body workout in the convenience and privacy of your own home.

For your benefit, read this manual carefully before you use the LIFESTYLER¨DT1000. If you have addi-

tional questions, please call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m.

until 7 p.m. Central Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number is

831.288261. The serial number can be found on a

decal attached to the DT1000 (see the front cover of this manual for the location of the decal).

Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled.

Assembly requires two people. Place all parts of the LIFESTYLER¨DT1000 in a cleared area and remove the

packing materials. Do not dispose of the packing materials until assembly is completed. Read through all steps before beginning. During assembly, make sure that all parts are oriented as shown in the drawings.

Assembly requires the included tool and grease packet, an adjustable wrench , a rubber mallet , and a phillips screwdriver .

ASSEMBLY

1. Insert the end of the Rear Stabilizer (34) into the Frame (46). Attach the Rear Stabilizer to the Frame with four M5 x 12mm Screws (56).

2. Turn the Front Stabilizer (20) so the indented holes are facing the floor. Attach the Front Stabilizer to the Frame (46) with two M8 x 48mm Carriage Bolts (57), two M8 Washers (43), and two Acorn Nuts (12).

3. Remove the three 8mm Locknuts (36) from the underside of the Seat (40). Attach the Seat to the top of the Seat Post (41) with the three Locknuts.

Insert the Seat Post (41) into the Frame (46). Align one of the holes in the Seat Post with the hole in the Frame. Insert the Seat Knob (45) into the Frame and the Seat Post, and tighten the Seat Knob into the Frame. Make sure to insert the Seat Knob through one of

the holes in the Seat Post; do not insert the Seat Knob under the Seat Post.

4. Apply a small amount of grease to the Pivot Shaft (17). Slide the Pivot Shaft into the Frame (46) and center it. Slide the Left Handlebar (10) onto the left end of the Pivot Shaft. Slide the Right Handlebar (not shown) onto the right end of the Pivot Shaft. Attach an M8 Washer (43) and an 8mm Locknut (36) to each end of the Pivot Shaft.

+ 8 hidden pages